Agriculture 8400

8400 for sale at Wm Nobbe & Co. St. Louis, Missouri. Serving your new and used equipment needs from Albion, Benton, Flora, Jerseyville, Marion, Norris City, Steeleville, Waterloo, Waterloo, Wayne City, IL, and Farmington, Scott City, St. Charles, and Ste. Genevieve, MO.

Double tap to zoom

 

Features

Optimal design and positioning of components increases crop delivery performance
ProDrive™ coupled with large tires boost performance and uptime in soft conditions
Heavier designed components increase reliability while improving uptime and lowering cost of operation
Best-in-class power efficiency delivers unmatched performance in the field
Advanced comfort and serviceability improve performance and uptime

Specifications

MODEL John Deere 8400 Self-Propelled Forage Harvester
ENGINE POWER  
Maximum power at 1800 rpm 397 kW (540 PS / 532 hp)
Maximum power at 1900 rpm  
Rated power at 2100 rpm 369 kW (502 PS / 495 hp)
Fuel tank capacity 1100 L (290.6 U.S. gal.)
ENGINE  
Manufacturer John Deere
Type PowerTech PSS 13.5L; Exhaust emission regulation compliancy - Final Tier 4
Model North America: 6135HZ013
Displacement 13.5 L (823.8 cu in.)
Cylinders In line six
Fuel system Unit injectors plus four valves
COOLING SYSTEM  
Cooling system capacity 113 L (29.85 U.S. gal.)
Cooling fan drive Direct
DRIVELINE  
Ground drive Standard: Hydrostatic, 3-speed - manual shift with helical gears; Engine rpm on road: 1650 rpm; Optional: Prodrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake system; Engine rpm on road: 1140-2100 rpm
Hydraulics Load sensing
Crop harvesting unit Harvest channel standard
Crop flow components Low-friction crop-flow concept
Main clutch Dry clutch
Number of discs One disc
Main driveband Reinforced with Kevlar inserts
Belt tensioning Active, hydraulic pressure
Main driveband, polybelt belts Six belts
ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM  
Type/voltage 12 V
Batteries/battery quantity/capacity 2 x 174 amp-hr
Alternator 200 amp
Hydraulic system capacity 50 L (13.2 U.S. gal.)
GROUND DRIVE  
Type Standard: hydrostatic, 3-speed manual shift; Optional: Prodrive, autoshift transmission
Differential lock Manual or automatic (optional comes with ProDrive)
Maximum transport speed Hydrostatic transmission: 30 km/h (18.6 mph); ProDrive transmission: 40 km/h (24.9 mph)
Rear axle type Hydro-mechanical 4WD
Automatic wet brake system Available with ProDrive transmission
Engine rpm - Management Optional
CAB  
Tilt and extend steering column Standard
Air conditioning and heater Standard - ClimaTrak
Cool box Optional
Trainee seat Standard
Hectare counter Standard
Operator information system Cornerpost display
CAN-BUS electronics Standard
Operator's seat Air-suspension seat standard
Side window wiper Rear and side window wiper optional; Parallel-type windscreen wiper
Electric adjust and heated Optional on rear view mirrors
Rear view mirrors Standard
MACHINE MANAGEMENT SOLUTIONS  
Yield monitoring Harvest Monitor optional
Documentation Harvest Doc optional
Crop analysis HarvestLab optional
Length-of-cut control based on crop parameter Infinitely variable length-of-cut (IVLOC) standard; AutoLOC optional - use with HarvestLab
Satellite (GPS) assisted steering AutoTrac optional
CROP-HARVESTING UNITS  
Header height control Advanced header control (AHC) optional
Grass pick-ups 3.0, 4.0, 4.5 m (9.8, 13.1, 14.8 ft)
LENGTH OF CUT  
Range 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps; 48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps
FEEDING SYSTEM/FEEDROLLS  
Feed roll frame opening Swing away, 37-45 degree (angle)
Number Four
Metal detector StandardStone detector is optional
Width, front 660 mm (26 in.)
Standard feed roll drive Hydro feedroll drive IVLOC standard; Infinitely header drive speed standard
CUTTERHEAD  
Knife drum width 680 mm (26.8 in.)
Knife drum diameter 668 mm (26.3 in.)
Speed at rated engine speed Standard - 1100 rpm; Optional - 1200 rpm
Knife types available (crop) Straight - grass; Curved - corn
Number of knives 40 or 48
KNIFE SHARPENING SYSTEM  
Reverse rotation Yes
Automatic from cab Yes, remote from cab
Reverse drive Standard
Reverse speed  
KERNEL PROCESSOR  
Type Serrated roller
Quick-change Quick change and remove
SERRATED ROLLER (KERNEL PROCESSOR)  
Maize, roll teeth number (speed differential) 118 - 24 or 32 percent
Wholecrop, roll teeth number (speed differential) 178 - 32 percent
Sorghum, roll teeth number (speed differential) 238 - 32 percent
Weight 145 kg (320 lb)
DISK TYPE (KERNEL PROCESSOR)  
Number of disks (top/bottom) 15/14 plus 2-1/2
Diameter of disks 240 mm (9.45 in.)
Weight 172.4 kg (380 lb)
BLOWER/CROP ACCELERATOR  
Number of blades 10
SPOUT  
Rotation, degrees 210 degree (angle)
Hydraulic height position Hydraulic raise and lower standard; Automatic spout positioning optional
Double-cap deflection Standard
MAINTENANCE  
Rotary radiator screen cleaner Standard
Automatic lubrication system AutoLube optional
Engine oil and filter change duration JD+50 II oil: 500 hours; Other oil: 250 hours
VEHICLE  
With front tires 710/70R42
With rear tires 620/60R30
Transport length (without header) 6.5 m (21.7 ft)
Transport width (without header) 3-3.5 m (9.84-11.5 ft)
Transport height (to cab roof) 3.89 m (12.75 ft)
Working height (maximum) Height to spout: 6.60 m (21.65 ft)
Approximate weight (without header)  
PROPELLING DRIVE  
Standard Hydrostatic, 3-speed - manual shift with helical gears
TRANSMISSION  
Type Standard: Hydrostatic, 3-speed - manual shift with helical gears; Hydro-mechanical rear axle optional
ADDITIONAL INFORMATION  
Date collected  

SAVE TIME and schedule your service visit today