John Deere Residential Mowers, Lawn Care Equipment

Select Series™ X700 Ultimate™ Lawn Tractors

Click model for specs

X700

Engine

	Power		23 hp (17.2 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		2-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-8

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower), 32 in. (54X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four, optional

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X), .179 in. (60 in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X720

Engine

	Power		27 hp (20.1 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		EFI, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		2-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-8

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X); .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X720SE

Engine

	Power		27 hp (20.1 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		EFI, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		2-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-8

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X); .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X724

Engine

	Power		27 hp (20.1 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		EFI, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		2-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x7.00-8

	Rear Tires		26x10.50-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Yes

	Turning Radius		21 in.

	Uncut Circle Radius		6 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-4.5 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X728

Engine

	Power		27 hp (20.1 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		EFI, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		Full-time 4-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-10

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X728SE

Engine

	Power		27 hp (20.1 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		EFI, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		Full-time 4-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-10

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X729

Engine

	Power		27 hp (20.1 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		45.5 cu in. (745 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		EFI, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		20 ampere

	Fuel Tank Capacity		5.2 U.S. gallon

Transmission

	Type		Full-time 4-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.50-10

	Rear Tires		26x12.00-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Yes

	Turning Radius		21 in.

	Uncut Circle Radius		6 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-4.5 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X740

Engine

	Power		24 hp (17.9 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		55.2 cu in. (904 cc)

	Manufacturer		Yanmar

	Cylinders		3, cast-iron liners

	Type		Diesel, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		40 ampere

	Fuel Tank Capacity		6.5 U.S. gallon

Transmission

	Type		2-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-8

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X744

Engine

	Power		24 hp (17.9 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		55.2 cu in. (904 cc)

	Manufacturer		Yanmar

	Cylinders		3, cast-iron liners

	Type		Diesel, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		40 ampere

	Fuel Tank Capacity		6.5 U.S. gallon

Transmission

	Type		2-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-8

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Yes

	Turning Radius		21 in.

	Uncut Circle Radius		6 in. (w/62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-4.5 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X748

Engine

	Power		24 hp (17.9 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		55.2 cu in. (904 cc)

	Manufacturer		Yanmar

	Cylinders		3, cast-iron liners

	Type		Diesel, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		40 ampere

	Fuel Tank Capacity		6.5 U.S. gallon

Transmission

	Type		Full-time 4-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-10

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X748SE

Engine

	Power		24 hp (17.9 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		55.2 cu in. (904 cc)

	Manufacturer		Yanmar

	Cylinders		3, cast-iron liners

	Type		Diesel, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		40 ampere

	Fuel Tank Capacity		6.5 U.S. gallon

Transmission

	Type		Full-time 4-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-10

	Rear Tires		26x12-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Not available on this model

	Turning Radius		25 in.

	Uncut Circle Radius		28 in. (62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-5.25 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X), .179 in. (60-in. 7-Iron)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

X749

Engine

	Power		24 hp (17.9 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		55.2 cu in. (904 cc)

	Manufacturer		Yanmar

	Cylinders		3, cast-iron liners

	Type		Diesel, OHV, oil filter

	Cooling Method		Liquid

	Alternator Capacity		40 ampere

	Fuel Tank Capacity		6.5 U.S. gallon

Transmission

	Type		Full-time 4-wheel drive

	Control		Twin Touch pedals

	Cruise Control		Yes

	Oil Cooler		Yes

	Differential Lock		Yes

	Forward Speed		0-8.5 mph

	Reverse Speed		0-6 mph

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Yes, front

	Receiver Hitch		Yes, front

	Front Tires		18x8.5-10

	Rear Tires		26x12.00-12

	Front Axle		Cast iron

	Hood Material		Noryl

	Hourmeter		Yes

	Headlights		Halogen

	Taillights		Yes

	Backup Lights		Yes

	Rear Work Lights		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Fender Handles		Yes

	Cupholder		Yes

Steering

	Type		Power

	Tilt Steering Wheel		Yes, 6 positions

	All-Wheel Steer		Yes

	Turning Radius		21 in.

	Uncut Circle Radius		6 in. (w/62X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		18 in.

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Six-position

Lift System

	Type		Two-function hydraulic

	Hydraulic Outlets		Four

	Mower Cut Height		1-4.5 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Mower Deck Material		.120 in. (48X), .135 in. (54X, 62X)

	Mower Wheel Adjustment		Spring-loaded pin, 7-positions (48X, 54X, 62X), 8-positions (60 in. 7-Iron)

	Mower Drive System		Hydraulic clutch, shaft

	Mower Wheels		Four

Select Series™ X500 Multi-Terrain™ Lawn Tractors

Click model for specs

X500/48X

Engine

	Power		26 hp (19.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		Overhead valve (OHV), oil filter

	Battery		500 cold-crank amps

	Choke/Speed Control		Separate levers

	Cooling Method		Air

	Fuel Tank Capacity, U.S. gallon		4.5

	Fuel Gauge		Yes

Transmission

	Type		Automatic with differential lock

	Control		Twin Touch pedals

	Cruise Control		Lever on dash

	Forward Speed, mph (km/h)		0 to 7.2 (0 to 11.6)

	Reverse Speed, mph (km/h)		0 to 5.2 (0 to 8.4)

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Standard rear

	Front Tires		16x6.5-8 turf

	Rear Tires		24x12-12 turf

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Tool Tray		Yes, under seat

	Fender Handles		Yes

	Cup Holder		Yes

Steering

	Type		Manual, two-wheel steer

	Tilt Steering Wheel		No

	Turning Radius, in. (mm)		22 (559)

	Uncut Circle Radius		27 in. (48X Mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15-in. open-back design with grasp

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Foot pedal

	Mower Cut Height		1 in. to 4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Type		Side discharge

	Mower Deck Material		0.120 in. (3 mm)

	Mower Wheel Adjustment		Seven-position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt

X500/54X

Engine

	Power		26 hp (19.4 kW) *

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		Overhead valve (OHV), oil filter

	Battery		500 cold-crank amps

	Choke/Speed Control		Separate levers

	Cooling Method		Air

	Fuel Tank Capacity, U.S. gallon		4.5

	Fuel Gauge		Yes

Transmission

	Type		Automatic with differential lock

	Control		Twin Touch pedals

	Cruise Control		Lever on dash

	Forward Speed, mph (km/h)		0 to 7.2 (0 to 11.6)

	Reverse Speed, mph (km/h)		0 to 5.2 (0 to 8.4)

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Standard rear

	Front Tires		16x6.5-8 turf

	Rear Tires		24x12-12 turf

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Tool Tray		Yes, under seat

	Fender Handles		Yes

	Cup Holder		Yes

Steering

	Type		Manual, two-wheel steer

	Tilt Steering Wheel		No

	Turning Radius, in. (mm)		22 (559)

	Uncut Circle Radius		24 in. (54X Mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15-in. open-back design with grasp

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Foot pedal

	Mower Cut Height		1 in. to 4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Type		Side discharge

	Mower Deck Material		0.135 in. (3.4 mm)

	Mower Wheel Adjustment		Seven-position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt

X520

Power
26-hp V-Twin, liquid-cooled, John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.

Performance
5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes Foot-operated traction assist locks rear wheels together for increased traction Low-effort manual steering provides a tight 22-inch turning radius and excellent maneuverability 54-inch Edge Xtra™ Cutting System is designed to provide excellent performance in all conditions and operating modes including side discharge, mulching and material collection Heavy-duty all-purpose rear tires for increased traction and ride quality

X530

Engine

	Power		26 hp (19.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		Overhead valve (OHV), oil filter

	Battery		500 cold-crank amps

	Choke/Speed Control		Separate levers

	Cooling Method		Air

	Fuel Tank Capacity, U.S. gallon		4.5

	Fuel Gauge		Yes

Transmission

	Type		Automatic with differential lock

	Control		Twin Touch pedals

	Cruise Control		Lever on dash

	Forward Speed, mph (km/h)		0 to 7.2 (0 to 11.6)

	Reverse Speed, mph (km/h)		0 to 5.2 (0 to 8.4)

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Standard rear

	Front Tires		16x6.5-8 turf

	Rear Tires		24x12-12 heavy duty all purpose

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Tool Tray		Yes, under seat

	Fender Handles		Yes

	Cup Holder		Yes

Steering

	Type		Power, two-wheel steer

	Tilt Steering Wheel		No

	Turning Radius, in. (mm)		22 (559)

	Uncut Circle Radius		24 in. (54X Mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open-back design with grasp

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Hydraulic

	Mower Cut Height		1 in. to 4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Type		Side discharge

	Mower Deck Material		0.135 in. (3.4 mm)

	Mower Wheel Adjustment		Seven position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt

X534

Engine

	Power		26 hp (19.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		Overhead valve (OHV), oil filter

	Battery		500 cold-crank amps

	Choke/Speed Control		Separate levers

	Cooling Method		Air

	Fuel Tank Capacity, U.S. gallon		4.5

	Fuel Gauge		Yes

Transmission

	Type		Automatic with differential lock

	Control		Twin Touch pedals

	Cruise Control		Lever on dash

	Forward Speed, mph (km/h)		0 to 7.2 (0 to 11.6)

	Reverse Speed, mph (km/h)		0 to 5.2 (0 to 8.4)

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Optional front, standard rear

	Front Tires		16x6.5-8 turf

	Rear Tires		24x9.5-12 turf

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Tool Tray		Yes, under seat

	Fender Handles		Yes

	Cup Holder		Yes

Steering

	Type		Power, four-wheel steer

	Tilt Steering Wheel		Yes, five position

	Turning Radius, in. (mm)		27 (686)

	Uncut Circle Radius		14 in. (48X Mower); 13 in. (54X Mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		21 in. open-back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Hydraulic

	Mower Cut Height		1 in. to 4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Type		Side discharge

	Mower Deck Material		48X = 0.120 in. (3 mm); 54X = 0.135 in. (3.4 mm)

	Mower Wheel Adjustment		Seven-position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt

X540

Engine

	Power		26 hp (19.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		41.2 cu in. (675 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		Overhead valve (OHV), oil filter

	Battery		500 cold-crank amps

	Choke/Speed Control		Separate levers

	Cooling Method		Liquid

	Fuel Tank Capacity, U.S. gallon		4.5

	Fuel Gauge		Yes

Transmission

	Type		Automatic with differential lock

	Control		Twin Touch pedals

	Cruise Control		Lever on dash

	Forward Speed, mph (km/h)		0 to 7.2 (0 to 11.6)

	Reverse Speed, mph (km/h)		0 to 5.2 (0 to 8.4)

Chassis

	Frame		Fully welded

	Primer/Paint		E-coat/powder

	Weight Bracket		Standard front and rear

	Front Tires		16x6.5-8 turf

	Rear Tires		24x12-12 heavy duty all purpose

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	12 Volt Outlet		Yes

	Service Interval Decal		Yes

	Covered Toolbox		Yes

	Tool Tray		Yes, under seat

	Fender Handles		Yes

	Cup Holder		Yes

Steering

	Type		Power, two-wheel steer

	Tilt Steering Wheel		Yes, five position

	Turning Radius, in. (mm)		22 (559)

	Uncut Circle Radius		24 in. (54X Mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		21-in. open-back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Hydraulic

	Mower Cut Height		1 in. to 4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower Deck

	Type		Side discharge

	Mower Deck Material		0.135 in. (3.4 mm)

	Mower Wheel Adjustment		Seven-position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt

Select Series™ X300 Lawn Tractors

Click model for specs

X300, 38-inch deck

Engine

	Power		17 hp (12.7 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		28.8 cu in. (472 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K46 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.5 mph

	Reverse Speed		0-4.0 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		2-wheel steer

	Turning Radius		16 in.

	Uncut Circle Radius		28 in. (38X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Foot pedal with optional adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		38 in.

	Mower Deck Material		.105 in. (38X)

	Mower Wheel Adjustment		4-position, tool required

	Mower Level Adjustment		At mower lift links

	Mower Drive System		In-line belt, electric PTO

X300, 42-inch deck

Engine

	Power		18 hp (13.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		36.8 cu in. (603 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K46 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.5 mph

	Reverse Speed		0-4.0 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		2-wheel steer

	Turning Radius		16 in.

	Uncut Circle Radius		28 in. (42X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		2 coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Foot pedal with optional adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		42 in.

	Mower Deck Material		.105 in. (42X)

	Mower Wheel Adjustment		4-position, tool required

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt, electric PTO

X300, 42-inch mulching deck

Engine

	Power		17 hp (12.7 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		28.8 cu in. (472 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K46 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.5 mph

	Reverse Speed		0-4.0 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		2-wheel steer

	Turning Radius		16 in.

	Uncut Circle Radius		27 in. (42M mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Foot pedal with standard adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Mulch

	Mower Cutting Width		42 in.

	Mower Deck Material		.105 in. (42M)

	Mower Wheel Adjustment		4-position, tool required

	Mower Level Adjustment		At mower lift links

	Mower Drive System		Two in-line belts, tension release lever, electric PTO

X300R, 42-inch rear discharge deck

Engine

	Power		18 hp (13.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		36.8 cu in. (603 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		2.4 U.S. gallon

Transmission

	Type		K46 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.3 mph

	Reverse Speed		0-4.0 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		2-wheel steer

	Turning Radius		19 in.

	Uncut Circle Radius		29 in. (42R mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Foot pedal with adjustable spring assist

	Mower Cut Height		1-3 3/4 in.

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Rear discharge

	Mower Cutting Width		42 in.

	Mower Deck Material		.120 in.

	Mower Wheel Adjustment		4-position, tool required

	Mower Level Adjustment		At mower lift links

	Mower Drive System		In-line belt, e

X304

Engine

	Power		18 hp (13.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		36.8 cu in. (603 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K46 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.5 mph

	Reverse Speed		0-4.0 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-10

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		4-wheel steer

	Turning Radius		15 in.

	Uncut Circle Radius		16 in. (42X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		2 coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Foot pedal with optional adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		42 in.

	Mower Deck Material		0.105 in. (42X)

	Mower Wheel Adjustment		4-position, tool required

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt, electric PTO

X320

Engine

	Power		22 hp (16.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K58 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-6.2 mph

	Reverse Speed		0-3.5 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6.5-8

	Rear Tires		22x11-10

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		2-wheel steer

	Turning Radius		16 in.

	Uncut Circle Radius		21 in. (48X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		2 coil springs, three-position no-tools adjustment for operator weight

Lift System

	Type		Foot pedal with adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		48 in.

	Mower Deck Material		0.120 in. (48X)

	Mower Wheel Adjustment		7-position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt, electric PTO

X324

Engine

	Power		22 hp (16.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K58 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.9 mph

	Reverse Speed		0-3.5 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-10

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		4-wheel steer

	Turning Radius		15 in.

	Uncut Circle Radius		9 in. (48X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Foot pedal with adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		48 in.

	Mower Deck Material		0.120 in. (48X)

	Mower Wheel Adjustment		7-position, spring-loaded pin (48X)

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt, electric PTO

X340

Engine

	Power		25 hp (18.6 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		41.2 cu in. (675 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K58 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-5.8 mph

	Reverse Speed		0-3.5 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6.5-8

	Rear Tires		22x11-10

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		2-wheel steer

	Turning Radius		16 in.

	Uncut Circle Radius		18 in. (54X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Foot pedal with adjustable spring assist

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		54 in.

	Mower Deck Material		.135 in. (54X)

	Mower Wheel Adjustment		7-position, pin and spring clip

	Mower Level Adjustment		At mower lift links

	Mower Drive System		In-line be

X360

Engine

	Power		22 hp (16.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.3 cu in. (726 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin, cast-iron liners

	Type		OHV, oil filter

	Charging System		15 amp regulated

	Battery		195 cold-crank amps

	Choke/Speed Control		Separate levers

	Fuel Tank Capacity		3.3 U.S. gallon

Transmission

	Type		K58 automatic

	Control		Twin Touch pedals

	Cruise Control		Standard

	Forward Speed		0-6.2 mph

	Reverse Speed		0-3.5 mph

Chassis

	Frame		Welded heavy-duty

	Primer/Paint		E-coat/powder

	Front Tires		15x6.5-8

	Rear Tires		22x11-10

	Front Axle		Cast iron

	Hood Material		Xenoy

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Type		Power with 5-position wheel, 2-wheel steer

	Turning Radius		22 in.

	Uncut Circle Radius		24 in. (48X mower)

	Spindle Bushings		Metal, replaceable

Seat

	Seat Back Height		15 in. open back

	Fore-aft Adjustment		7 in. while seated

	Seat Suspension		Three-position

Lift System

	Type		Hydraulic

	Mower Cut Height		1-4 in., 13 position

	Cut Height Increments		0.25 in.

	Preset Cut Height		Yes

Mower

	Type		Side discharge

	Mower Cutting Width		48 in.

	Mower Deck Material		0.120 in. (48X)

	Mower Wheel Adjustment		7-position, spring-loaded pin

	Mower Level Adjustment		Exact Adjust ports and onboard deck-leveling gauge

	Mower Drive System		In-line belt, electric P

100 Series Lawn Tractors

Click model for specs

D100

Engine

	Power		17.5 hp (13.05 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		30.6 cu in. (502 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		One

	Type		Overhead valve, AVS, full-pressure lube, oil filter

	Oil Drain		No tools

	Charging System		9 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		In-line 5-speed gear

	Cruise Control		Does not apply

	Forward Speed		1.5-5 mph

	Reverse Speed		2.3 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x8-8

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		No

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		25 in. (42-in. mower)

Seat

	Seat Back Height		11 in.

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		42 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Manual PTO

D110

Engine

	Power		19.5 hp (14.5 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		30.6 cu in. (502 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		One

	Type		Overhead valve, AVS, full-pressure lube, oil filter

	Oil Drain		No tools

	Charging System		9 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		No

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x8-8

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		25 in. (42-in. mower)

Seat

	Seat Back Height		11 in.

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		42 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Manual PTO

D120

Engine

	Power		21 hp (15.7 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		33 cu in. (540 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		One

	Type		Overhead valve, full-pressure lube, oil filter

	Oil Drain		No tools

	Charging System		9 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		Yes

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x8-8

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes, with cover

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		25 in. (42-in. mower)

Seat

	Seat Back Height		15 in.

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		42 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Manual PTO

D130

Engine

	Power		22 hp (16.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		40 cu in. (656 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Type		Overhead valve, full-pressure lube, oil filter

	Oil Drain		No tools

	Charging System		9 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		Yes

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes, with cover

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		25 in. (42-in. mower)

Seat

	Seat Back Height		15 in.

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		42 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Manual PTO

D140

Engine

	Power		22 hp (16.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		40 cu in. (656 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Type		Overhead valve, full-pressure lube, oil filter

	Oil Drain		No tools

	Charging System		9 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		Yes

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes, with cover

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		20 in. (48-in. mower)

Seat

	Seat Back Height		15 in.

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		48 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Electric PTO

D150

Engine

	Power		22 hp (16.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		40 cu in. (656 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Type		Overhead valve, Extended Life Series (ELS)

	Oil Drain		No tools

	Charging System		16 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		Yes

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		15x6-6

	Rear Tires		20x10-8

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes, with cover

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		20 in. (48-in. mower)

Seat

	Seat Back Height		15 in.

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		48 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Electric PTO

D160

Engine

	Power		24 hp (17.9 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (725 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Type		Overhead valve, Extended Life Series (ELS)

	Oil Drain		No tools

	Charging System		16 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		Yes

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		16x6.5-8

	Rear Tires		22x9.5-12

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes, with cover

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		20 in. (48-in. mower)

Seat

	Seat Back Height		15 in. w/lumbar adjustment

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		48 in.

	Mower Deck Material		.105 in. (12 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Electric PTO

D170

Engine

	Power		26 hp (19.4 kW)*

		*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (725 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Type		Overhead valve, Extended Life Series (ELS)

	Oil Drain		No tools

	Charging System		16 amp regulated

	Choke/Speed Control		One lever

	Fuel Tank Location		Rear

	Fuel Tank Capacity		2.4 U.S. gallon

	Fuel Gauge		Mechanical, viewable from seat

Transmission

	Control		Two-pedal foot-controlled hydro

	Cruise Control		Yes

	Forward Speed		0-5.5 mph

	Reverse Speed		0-3.2 mph

Chassis

	Frame		Full-length welded steel

	Primer/Paint		E-coat/powder

	Front Tires		16x6.5-8

	Rear Tires		22x9.5-12

	Front Axle		Cast iron

	Hood Material		JD Loy

	Floor Mats		Yes

	CargO Mount System		Yes

	Storage Pocket		No

	Hourmeter		Yes

	Service Interval Decal		Yes

	Tool Tray		Yes, with cover

	Cupholder		Yes

Steering

	Turning Radius		18 in.

	Uncut Circle Radius		18 in. (54-in. mower)

Seat

	Seat Back Height		15 in. w/lumbar adjustment

	Fore-aft Adjustment		5.5 in. while seated

Lift system

	Mower Cut Height		1-4 in., 13 positions

	Cut Height Increments		0.25 in.

Mower

	Mower Cutting Width		54 in.

	Mower Deck Material		.120 in. (11 ga)

	Mower Wash Port		Yes

	Mower Level Adjustment		Easy-Level deck

	Mower Drive System		Electric PTO

Attachments for Riding Mowers

Click model for specs

X500 Multi-Terrain Tractors

Carry, Haul & Move Material
- 10P Utility Cart
- 13 Steel Utility Cart
- 17P Poly Cart
- 40-in. Tractor Shovel
- 42-in. Lawn Sweeper
- 48-inch Front Blade
- CargO Mount Single Bucket Holder
- MC519 Cart
Gardening & Ground Engagement
- 30-inch Mechanical Drive Tiller
- 38-inch Box Scraper - Integral
- 40-in. Tractor Shovel
- 42-inch Hydraulic Tiller
- 42-inch Rear Blade - Integral
- 48-inch Front Blade
- Cultivator - Integral (Sleeve) Hitch
- Disk Harrow - Integral (Sleeve) Hitch
- Integral Hitch
- Moldboard Plow - Integral (Sleeve) Hitch
Operator Comfort & Convenience
- 12-Volt Oscillating Fan
- 12-Volt Work Light Kit
- Sun Shade
- Weather Enclosure
Snow Removal
- 44-inch Snow Blower
- 47-inch Snow Blower
Tractor Protection & Appearance
- Front Brush Guard
- Sun Shade
- Weather Enclosure
Yard & Lawn Care
- 3-Bag, 14-Bushel, Power Flow Bagger
- 3.5 cu. ft. Tow-Behind Broadcast Spreader
- 7-Bushel Power Flow Bagger
- 10P Utility Cart
- 13 Steel Utility Cart
- 15-Gallon Tow-Behind Sprayer
- 17P Poly Cart
- 25-Gallon Portable Sprayer
- 25-Gallon Tow-Behind Sprayer
- 36-inch Lawn Roller
- 40-inch Aerator/Spreader
- 40-inch Spiker Aerator
- 40-inch Plug Aerator
- 40-inch Thatcherator
- 40-Gallon Tow-Behind Sprayer
- 42-in. Lawn Sweeper
- 48-inch Plug Aerator
- 80-lb. Pull-Type Spin Spreader
- 125-lb. Pull-Type Spin Spreader
- 125-lb. Electric Spreader
- 175-lb. Pull-Type Spin Spreader
- Front-Mounted Thatchers
- MC519 Cart

X700 Select Series

Carry, Haul & Move Material
- 10P Utility Cart
- 13 Steel Utility Cart
- 17P Poly Cart
- 18 Utility Cart
- 21 Utility Cart
- 42-in. Lawn Sweeper
- 45 Loader
- 54-in. Tractor Shovel
- 54-inch Quick-Hitch Front Blade
- 60-inch Mid-Mount Blade
- 60-inch, Rear-Mount Blade, 3-Point Hitch-Mounted
- MC519 Cart
Gardening & Ground Engagement
- 42-inch Hydraulic Tiller
- 48-inch Box Scraper
- 54-inch Tractor Shovel
- 54-inch Quick-Hitch Front Blade
- 60-inch Mid-Mount Blade
- 60-inch Rear-Mount Blade, 3-Point Hitch-Mounted
- 647 Tiller
- Category 1 3-Point Hitch Cultivator
- Category 1 3-Point Hitch Harrow Disk
- Category 1 3-Point Hitch Plow, Single Bottom
Operator Comfort & Convenience
- 12-Volt Work Light Kit
- Category 1 3-Point Hitch 10K PTO Generator
- Hard-Side Cab
- Soft Weather Enclosure
- Soft-Side Cab
Snow Removal
- 47-inch Quick Hitch Snow Blower
- 52-inch Quick Hitch Rotary Broom
- 54-inch Quick Hitch Front Blade
- 54-inch Snow Blower
- 60-inch Heavy-Duty Rotary Broom
Tractor Protection & Appearance
- Front Brush Guard
- Hard-Side Cab
- Soft Weather Enclosure
- Soft-Side Cab
Yard & Lawn Care
- 3-Bag, 14-Bushel, Power Flow Bagger
- 3.5 cu. ft. Tow-Behind Broadcast Spreader
- 7-Bushel Power Flow Bagger
- 10P Utility Cart
- 13 Steel Utility Cart
- 15-Gallon Tow-Behind Sprayer
- 17P Poly Cart
- 18 Utility Cart
- 21 Utility Cart
- 25-Gallon Tow-Behind Sprayer
- 36-inch Lawn Roller
- 40-inch Aerator/Spreader
- 40-inch Spiker Aerator
- 40-inch Plug Aerator
- 40-inch Thatcherator
- 40-Gallon Tow-Behind Sprayer
- 40-Gallon 3-Point Hitch-Mounted Sprayer
- 42-in. Lawn Sweeper
- 48-inch Plug Aerator
- 52-inch Quick-Hitch Rotary Broom
- 60-inch Heavy-Duty Rotary Broom
- 80-lb. Pull-Type Spin Spreader
- 125-lb. Pull-Type Spin Spreader
- 125-lb. Electric Spreader
- 175-lb. Pull-Type Spin Spreader
- Front-Mounted Thatchers
- MC519 Cart

2011 100 Series

Carry, Haul & Move Material
- 10P Utility Cart
- 17P Poly Cart
- 42-in. Lawn Sweeper
- CargO Mount Single Bucket Holder
Operator Comfort & Convenience
- Canopy
- Snow Cab
Snow Removal
- 44-inch Snow Blower
- 46-in. Snow Blade
Tractor Protection & Appearance
- Canopy
- Double-Bar Front Bumper
- Snow Cab
Yard & Lawn Care
- 3.5 cu. ft. Tow-Behind Broadcast Spreader
- 10P Utility Cart
- 17P Poly CArt
- 40-inch Plug Aerator
- 40-inch Spiker Aerator
- 42-in. Lawn Sweeper
- 125-lb. Pull-Type Spin Spreader
- 175-lb. Pull-Type Spin Spreader

EZtrak Series

Carry, Haul & Move Material
- 10P Utility Cart
- 42-in. Lawn Sweeper
Operator Comfort & Convenience
- EZtrak Dual Headlight Kit
- EZtrak Single Headlight Kit
- Foot Lift Kit
Yard & Lawn Care
- 2-Bag, 6.5 Bushel Rear Bagger
- 10P Utility Cart
- 42-in. Lawn Sweeper
- 48-inch Power Flow Bagger
- 54-inch Power Flow Bagger
- Deck Front Roller Kit
- EZtrak 15-Gallon Electric Sprayer
- EZtrak Grass Groomer
- Rear Hitch

X300 Select Series

Carry, Haul & Move Material
- 10P Utility Cart
- 17P Poly Cart
- 40-in. Tractor Shovel
- 42-in. Lawn Sweeper
- 44-inch Front Blade
- CargO Mount Single Bucket Holder
Gardening & Ground Engagement
- 40-in. Tractor Shovel
- 44-inch Front Blade
Operator Comfort & Convenience
- 12-Volt Oscillating Fan
- 12-Volt Work Light Kit
- Sun Shade
- Weather Enclosure
Snow Removal
- 44-inch Snow Blower
Tractor Protection & Appearance
- Front Brush Guard
- Single-Bar Front Bumper
- Sun Shade
- Weather Enclosure
Yard & Lawn Care
- 3.5 cu. ft. Tow-Behind Broadcast Spreader
- 7-Bushel Rear Bagger
- 7-Bushel Power Flow Bagger
- 10P Utility Cart
- 15-Gallon Tow-Behind Sprayer
- 17P Poly Cart
- 25-Gallon Portable Sprayer
- 25-Gallon Tow-Behind Sprayer
- 36-inch Lawn Roller
- 40-inch Aerator/Sprayer
- 40-inch Spiker Aerator
- 40-inch Plug Aerator
- 40-inch Thatcherator
- 42-in. Lawn Sweeper
- 80-lb. Pull-Type Spin Spreader
- 125-lb. Pull-Type Spin Spreader
- 125-lb. Electric Spreader
- 175-lb. Pull-Type Spin Spreader
- Front-Mounted Thatchers
- Rear Deflector Kit
- Rear Discharge Mulch Plug

2000 Series Compact Utility Tractors

Click model for specs

2305

Engine

	Manufacturer		Yanmar 3TNV76

		Engine HP (kW) - gross	24.1 (17.7) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	18.0 (13.4) per SAE

		Rated engine speed, rpm	3000

		Type	Diesel

		Operating range	1170-3170

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 68 (1.115)

	Cylinder Liners		Cast-In-Block

	Bore and Stroke, mm (in.)		76x82 (2.99x3.23)

	Compression Ratio		23.4:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type with safety element

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		41.7 (56.5)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		5.5 (21.0)

Electrical

	Type		12V

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		20

	Starter Size, hp (kW)		1.6 (1.2)

Fuel System

	Type		Diesel

	Injection Pump Type		---

	U.S. gal./hr (L/hr) @ 100% load*		1.6 (6.1)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydrostatic - 2 range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		N/A

	Direction Reverser; Forward/Reverse		No; Twin Touch Pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power

	Clutch; Wet/Dry		N/A

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		562 (255)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1654 (750)

		Rear, lb. (kg)	1477 (670)

	Creeper		No

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		5.2 (19.7)

		Steering	2.3 (8.9)

		Implement	2.9 (10.8)

	Pump Type		Gear

	Maximum Operating Pressure (PSI)		1987

	Draft Control Type		Select Control

	Remote Control Valves Available		2

3-Point Hitch

	Type		Limited Cat. 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		681 (309)

	Lift Capacity @ lift link ends, lb. (kg)		---

Power Take-Off (PTO)

	Standard		Rear @ 540; Mid @ 2100

	Optional		---

	Control		Independent

	Clutch		---

	Brake (for Mid and Rear PTO)		Wet disk

Fluid Capacities

	Fuel Tank, gal. (l)		5.5 (21.0)

	Cooling system (includes coolant bottle), qt. (l)		3.4 (3.2)

	Crankcase with filter, qt. (l)		3.4 (3.2)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		3.4 (13.0)

	Front Axle Gearcase (MFWD axle), gal. (l)		.625 (2.5)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		---

2320

Engine

	Manufacturer		Yanmar 3TNV76

		Engine HP (kW) - gross	24.1 (17.7 ) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	18.0 ( 13.4) per SAE

		Rated engine speed, rpm	3000

		Type	Diesel

		Operating range	1270-3170

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 68 (1.115)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		76x82 (2.99x3.23)

	Compression Ratio		23.4:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type, two stage

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		40.27 (54.6)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		6.1 (23); NA

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		20

	Starter Size, hp (kW)		1.6 (1.2)

Fuel System

	Type		---

	Injection Pump Type		Indirect Injection

	U.S. gal./hr (L/hr) @ 100% load*		1.6 (6.1)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydro; 2 Range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		N/A

	Direction Reverser; Forward/Reverse		Twin Touch pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		N/A

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		562 (255)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1940 (880)

		Rear, lb. (kg)	2426 (1100)

	Creeper		No

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		5.6 (21.2)

		Steering	2.2 (8.5)

		Implement	3.4 (12.7)

	Pump Type		Gear

	Maximum Operating Pressure (PSI)		2421

	Draft Control Type		Position Control

	Remote Control Valves Available		2

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		1150 (522)

	Lift Capacity @ lift link ends, lb. (kg)		1433 (650)

Power Take-Off (PTO)

	Standard		Standard Rear @ 540 RPM and Mid @ 2100 RPM std.

	Optional		---

	Control		Independent

	Clutch		Wet disk

	Brake (for Mid and Rear PTO)		Wet disk

Fluid Capacities

	Fuel Tank, gal. (l)		6.1 (23)

	Cooling system (includes coolant bottle), qt. (l)		3.4 (3.2)

	Crankcase with filter, qt. (l)		3.4 (3.2)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		2.6 (10.0)

	Front Axle Gearcase (MFWD axle), gal. (l)		3.6 (3.4)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

2520

Engine

	Manufacturer		Yanmar 3TNV82A

		Engine HP (kW) - gross	26.4 (19.4) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	20.5 (15.3) per SAE

		Rated engine speed, rpm	2600

		Type	Direct injection

		Operating range	1000-2750

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 81.2 (1.33)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		82x84 (3.23x3.31)

	Compression Ratio		19.2:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type, two stage

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		51.3 (69.6)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		7.1 (27); NA

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		40

	Starter Size, hp (kW)		1.6 (1.2)

Fuel System

	Type		Diesel

	Injection Pump Type		Gear

	U.S. gal./hr (L/hr) @ 100% load*		1.6 (6.2)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydro - 2 Range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		NA

	On-The-Go Shifting (Yes/No/Partial)		NA

	Direction Reverser; Forward/Reverse		Twin Touch pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		NA

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		562 (255)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1940 (880)

		Rear, lb. (kg)	2426 (1100)

	Creeper		NA

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		10.5 (39.6)

		Steering	5.5 (20.8)

		Implement	5.0 (18.8)

	Pump Type		Gear

	Maximum Operating Pressure (PSI)		2418

	Draft Control Type		Position Control

	Remote Control Valves Available		2

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		1250 (567)

	Lift Capacity @ lift link ends, lb. (kg)		1433 (650)

Power Take-Off (PTO)

	Standard		Standard Rear @ 540 RPM and Mid @ 2100 RPM std.

	Optional		---

	Control		Independent

	Clutch		Wet disk

	Brake (for Mid and Rear PTO)		Wet disk

Fluid Capacities

	Fuel Tank, gal. (l)		7.1 (27)

	Cooling system (includes coolant bottle), qt. (l)		4.1 (3.9)

	Crankcase with filter, qt. (l)		3.0 (2.8)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		3.9 (14.6)

	Front Axle Gearcase (MFWD axle), gal. (l)		3.6 (3.4)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

2720

Engine

	Manufacturer		Yanmar 3TNV88

		Engine HP (kW) - gross	31.4 (23.1) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	23.5 (17.5) per SAE

		Rated engine speed, rpm	2500

		Type	Direct injection

		Operating range	1000-2650

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 100 (1.642)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		88x90 (3.46x3.54)

	Compression Ratio		19.1:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type, two stage

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		63 (85.4)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		7.1 (27); NA

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		40

	Starter Size, hp (kW)		1.4 (1.04)

Fuel System

	Type		Diesel

	Injection Pump Type		Gear

	U.S. gal./hr (L/hr) @ 100% load*		1.4 (5.3)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydro - 2 Range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		NA

	On-The-Go Shifting (Yes/No/Partial)		NA

	Direction Reverser; Forward/Reverse		Twin Touch pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		NA

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		562 (255)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1940 (880)

		Rear, lb. (kg)	2426 (1100)

	Creeper		NA

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		10.5 (39.6)

		Steering	5.5 (20.8)

		Implement	5.0 (18.8)

	Pump Type		Gear

	Maximum Operating Pressure (PSI)		2421

	Draft Control Type		Position Control

	Remote Control Valves Available		2

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		1250 (567)

	Lift Capacity @ lift link ends, lb. (kg)		1433 (650)

Power Take-Off (PTO)

	Standard		Standard Rear @ 540 RPM and Mid @ 2100 RPM std.

	Optional		---

	Control		Independent

	Clutch		Wet disk

	Brake (for Mid and Rear PTO)		Wet disk

Fluid Capacities

	Fuel Tank, gal. (l)		7.1 (27)

	Cooling system (includes coolant bottle), qt. (l)		4 (3.85)

	Crankcase with filter, qt. (l)		4 (3.6)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		3.9 (14.6)

	Front Axle Gearcase (MFWD axle), gal. (l)		0.9 (3.4)

3000 Series Compact Utility Tractors

Click model for specs

3005

Engine

	Manufacturer		Yanmar 3TNV82A

		Engine HP (kW) - gross	27.5 (20.2) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	23.5 (17.5) per SAE

		PTO HP (kW) - Hydrostatic transmission	---

		Rated engine speed, rpm	2700

		Type	Diesel

		Operating range	925-2890

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 81.2 cu. in. (1.3L)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		82x84 (3.23x3.31)

	Compression Ratio		18.1:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Single-stage dry (manual steering) or two-stage dry (power steering)

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		54.1 ft./lb

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		6.3 (23.85)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		40

	Starter Size, hp (kW)		1.9 hp (1.4 kW)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		---

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Sliding gear; 8F/2R

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		No

	Direction Reverser; Forward/Reverse		No

	Final Drive		Spur gear

	Brakes		Dry shoe

	Steering		Power steering

	Clutch; Wet/Dry		Dry: Single Stage (2WD) / 2 Stage (4WD)

	Clutch Disk Diameter, in. (mm) wet clutch		8.46 (215)

	Drawbar Tongue Weight Capacity, lb. (kg)		675 (306)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1343 (609)

		Rear, lb. (kg)	1922 (872)

	Creeper		No

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		9.4 (36.4)

		Steering	4.2 (15.9)

		Implement	5.4 (20.5)

	Pump Type		Single gear (Manual steering models); Dual gear (Power steering models)

	Maximum Operating Pressure (PSI)		2050

	Draft Control Type		Position control

	Remote Control Valves Available		2

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		815 (370)

	Lift Capacity @ lift link ends, lb. (kg)		---

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		Mid @ 2100

	Control		Continuous Live - Dual Stage Clutch

	Clutch		---

	Brake (for Mid and Rear PTO)		Wet disk

Fluid Capacities

	Fuel Tank, gal. (l)		6.3 (23.85)

	Cooling system (includes coolant bottle), qt. (l)		25.3 (24)

	Crankcase with filter, qt. (l)		4.3 (4.1)

	Transmission and Hydraulic System, gal. (l) gear		16.3 (15.4)

	Transmission and Hydraulic System, gal. (l) hydrostatic		---

	Front Axle Gearcase (MFWD axle), gal. (l)		0.56(2.13)

3032E

Engine

	Manufacturer		Yanmar 3TNV88

		Engine HP (kW) - gross	31.4 (23.1) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	25.0 (18.6) per SAE

		Rated engine speed, rpm	2500

		Type	Diesel

		Operating range	950 (2800)

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 97.6 (1.6)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		88x90 (3.4x3.54)

	Compression Ratio		19:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type with safety element

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		62.7 (85.0)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		6.4 (24.2)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		40 amp

	Starter Size, hp (kW)		1.4 (1.0)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		---

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydro, Two-Range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		No

	Direction Reverser; Forward/Reverse		Yes; Twin Touch pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		---

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		Optional - 882 (400)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1760 (800)

		Rear, lb. (kg)	2640 (1200)

	Creeper		No

Hydraulics

	Type		Open center

	Pump Rated Output, gpm (L/min.)		9.3 (35.2)

		Steering	4.0 (15.0)

		Implement	5.3 (20.2)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position control

	Remote Control Valves Available		2 (supplied with loader)

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		1356 (615)

	Lift Capacity @ lift link ends, lb. (kg)		---

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		---

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		6.4 (24.2)

	Cooling system (includes coolant bottle), qt. (l)		4.4 (4.2)

	Crankcase with filter, qt. (l)		4.8 (4.5)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		5.5 (21.0)

	Front Axle Gearcase (MFWD axle), gal. (l)		0.85 (3.2)

Final Drive

	Type		Spur gear

	Engage On-the-Go Rear Differential Lock		Yes

3038E

Engine

	Manufacturer		Yanmar 3TNV84T

		Engine HP (kW) - gross	37.1 (27.3) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	30.0 (22.4) per SAE

		Rated engine speed, rpm	2500

		Type	Diesel

		Operating range	950 (2800)

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		3 / 91.5 (1.5)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		84x90 (3.3x3.54)

	Compression Ratio		19:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type with safety element

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		62.7 (85.0)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		6.4 (24.2)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		40 amp

	Starter Size, hp (kW)		1.4 (1.0)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		---

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydro, 2-Range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		No

	Direction Reverser; Forward/Reverse		Yes; Twin Touch pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		---

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		Optional - 882 (400)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1760 (800)

		Rear, lb. (kg)	2640 (1200)

	Creeper		No

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		9.3 (35.2)

		Steering	4.0 (15.0)

		Implement	5.3 (20.2)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position control

	Remote Control Valves Available		2 (supplied with loader)

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		1356 (615)

	Lift Capacity @ lift link ends, lb. (kg)		---

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		---

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		6.4 (24.2)

	Cooling system (includes coolant bottle), qt. (l)		4.4 (4.2)

	Crankcase with filter, qt. (l)		4.8 (4.5)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		5.5 (21.0)

	Front Axle Gearcase (MFWD axle), gal. (l)		0.85 (3.2)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

3320

Engine

	Manufacturer		Yanmar 3TNV88

		Engine HP (kW) - gross	32.8 (24.1) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	25.5 (19.0) per SAE

		PTO HP (kW) - Hydrostatic transmission	25.0 (18.6) per SAE

		Rated engine speed, rpm	2600

		Type	Diesel

		Operating range	950 (2810)

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		3 / 100 (1.64)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		88x90 (3.46x3.54)

	Compression Ratio		18:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type w/safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		61.6 (83.5)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-13.5 (51.1); Cab-11.8 (44.7)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		Open-40 amp; Cab-75 amp

	Starter Size, hp (kW)		1.8 (1.4)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.0 (7.6)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		PowrReverser; 12F/12R

	Opt. Transmission; Forward/Reverse		eHydro - 3 Range

	Left-Hand Reverser		Yes

	On-The-Go Shifting (Yes/No/Partial)		Yes

	Direction Reverser; Forward/Reverse		Yes; Twin Touch Pedals

	Final Drive		Helical gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		Multi-disk, wet

	Clutch Disk Diameter, in. (mm) wet clutch		4.43 (112.5)

	Drawbar Tongue Weight Capacity, lb. (kg)		882 (400)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1587-3197 (720-1450)

		Rear, lb. (kg)	5292 (2400)

	Creeper		No / Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		13.9 (52.5)

		Steering	5.3 (20.0)

		Implement	8.6 (32.5)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		2200 (999)

	Lift Capacity @ lift link ends, lb. (kg)		2530 (1149)

Power Take-Off (PTO)

	Standard		Rear @ 540 RPM

	Optional		Mid @ 2100 RPM

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		Open-13.5 (51.1); Cab-11.8 (44.7)

	Cooling system (includes coolant bottle), qt. (l)		Open-5.3 (1.4); Cab-7.6 (7.0)

	Crankcase with filter, qt. (l)		5.1 (4.8)

	Transmission and Hydraulic System, gal. (l) gear		6.3 (23.8)

	Transmission and Hydraulic System, gal. (l) hydrostatic		6.8 (25.7)

	Front Axle Gearcase (MFWD axle), gal. (l)		4.7 (4.5)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

3520

Engine

	Manufacturer		Yanmar 3TNV84T

		Engine HP (kW) - gross	37.1 (27.3) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	30.5 (22.7) per SAE

		PTO HP (kW) - Hydrostatic transmission	30.0 (22.4) per SAE

		Rated engine speed, rpm	2600

		Type	Diesel

		Operating range	950-2810

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		3/ 91.5 (1.5)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		84x90 (33x3.54)

	Compression Ratio		18:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type with safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		71.1 (96.4)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-13.5 (51.1); Cab-11.8 (44.7)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		Open-40 amp; Cab-75 amp

	Starter Size, hp (kW)		1.8 (1.4)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.4 (9.1)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		PowrReverser; 12F/12R

	Opt. Transmission; Forward/Reverse		eHydro - 3 Range

	Left-Hand Reverser		Yes / NA

	On-The-Go Shifting (Yes/No/Partial)		Yes

	Direction Reverser; Forward/Reverse		Yes / Twin Touch Pedals

	Final Drive		Helical gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		Wet

	Clutch Disk Diameter, in. (mm) wet clutch		Two wet multi-disk

	Drawbar Tongue Weight Capacity, lb. (kg)		882 (400)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1587-3197 (720-1450)

		Rear, lb. (kg)	5292 (2400)

	Creeper		No / Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		13.9 (52.5)

		Steering	5.3 (20)

		Implement	8.6 (32.5)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		2200 (999)

	Lift Capacity @ lift link ends, lb. (kg)		2530 (1149)

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		Mid @ 2100

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		Open-13.5 (51.1); Cab-11.8 (44.7)

	Cooling system (includes coolant bottle), qt. (l)		Open-5.3 (1.4); Cab-7.6 (7.0)

	Crankcase with filter, qt. (l)		5.1 (4.8)

	Transmission and Hydraulic System, gal. (l) gear		6.3 (23.8)

	Transmission and Hydraulic System, gal. (l) hydrostatic		6.8 (25.7)

	Front Axle Gearcase (MFWD axle), gal. (l)		4.7 (4.5)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

3720

Engine

	Manufacturer		Yanmar 3TNV84HT

		Engine HP (kW) - gross	43.2 (31.8) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	35.0 (26.1) per SAE

		Rated engine speed, rpm	2600

		Type	Diesel

		Operating range	950-2810

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		3/91.5 (1.5)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		84x90 (33x3.54)

	Compression Ratio		18:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type with safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		84.3 (114.3)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-13.5 (51.1); Cab-11.8 (44.7)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		Open-40 amp; Cab-75 amp

	Starter Size, hp (kW)		1.8 (1.4)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.8 (10.6)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		eHydro

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		---

	On-The-Go Shifting (Yes/No/Partial)		---

	Direction Reverser; Forward/Reverse		No / Twin Touch Pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		N/A

	Clutch Disk Diameter, in. (mm) wet clutch		N/A

	Drawbar Tongue Weight Capacity, lb. (kg)		882 (400)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1587-3197 (720-1450)

		Rear, lb. (kg)	---

	Creeper		Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		13.9 (52.5)

		Steering	5.3 (20)

		Implement	8.6 (32.5)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		2200 (999)

	Lift Capacity @ lift link ends, lb. (kg)		2530 (1149)

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		Mid @ 2100

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		Open-13.5 (51.1); Cab-11.8 (44.7)

	Cooling system (includes coolant bottle), qt. (l)		Open-5.3 (1.4); Cab-7.6 (7.0)

	Crankcase with filter, qt. (l)		6 (5.7)

	Transmission and Hydraulic System, gal. (l) gear		N/A

	Transmission and Hydraulic System, gal. (l) hydrostatic		6.8 (25.7)

	Front Axle Gearcase (MFWD axle), gal. (l)		4.7 (4.5)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

4000 Series Compact Utility Tractors

Click model for specs

4005

Engine

	Manufacturer		Yanmar 4TNV88

		Engine HP (kW) - gross	41.5 (30.5) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	35.0 (26.1) per SAE

		PTO HP (kW) - Hydrostatic transmission	---

		Rated engine speed, rpm	2700

		Type	Diesel

		Operating range	925-2920

	Aspiration		Natural

	Cylinders/Displacement, cu. in. (liters)		4 / 133.64 (2.19)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		84x90 (3.31x3.54)

	Compression Ratio		---

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type with safety element

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		74.8 (101.4)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		8.5 (32)

Electrical

	Type		12 volt

	Battery Size (CCA)		650

	Alternator (12 volt, amp)		40

	Starter Size, hp (kW)		2.7 (2.0)

Fuel System

	Type		Direct Injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		---

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Collar Shift; 9F/3R

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		Partial

	Direction Reverser; Forward/Reverse		No

	Final Drive		Planetary

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		Dry

	Clutch Disk Diameter, in. (mm) wet clutch		8.9 (225 mm)

	Drawbar Tongue Weight Capacity, lb. (kg)		825 (374)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	2010 (912)

		Rear, lb. (kg)	3224 (1463)

	Creeper		No

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		13 (49.2)

		Steering	4.5 (17.0)

		Implement	8.5 (32.2)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2262

	Draft Control Type		Position

	Remote Control Valves Available		2

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		2020 (916.3)

	Lift Capacity @ lift link ends, lb. (kg)		---

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		---

	Control		Continuous live

	Clutch		Dry disk

	Brake (for Mid and Rear PTO)		NA

Fluid Capacities

	Fuel Tank, gal. (l)		8.5 (32)

	Cooling system (includes coolant bottle), qt. (l)		6.1 (5.8)

	Crankcase with filter, qt. (l)		5.6 (5.3)

	Transmission and Hydraulic System, gal. (l) gear		5.5 (21)

	Transmission and Hydraulic System, gal. (l) hydrostatic		---

	Front Axle Gearcase (MFWD axle), gal. (l)		.55 (2.1)

Final Drive

	Type		Planetary

	Engage On-the-Go Rear Differential Lock		Yes

4105

Engine

	Manufacturer		Yanmar 3TNV84T-KJT

		Engine HP (kW) - gross	40.5 (29.8) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	32.5 (24.2) per SAE

		Rated engine speed, rpm	2800

		Type	Diesel

		Operating range	1000 - 2975

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		3 / 91.5 (1.5)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		84x90 (3.3x3.54)

	Compression Ratio		19:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry-type with safety element

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		59.2 (80.3)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		10.5 (39.7)

Electrical

	Type		12 volt

	Battery Size (CCA)		500

	Alternator (12 volt, amp)		40 amp

	Starter Size, hp (kW)		1.9 (1.4)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.35 (8.9)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		Hydro, 2-Range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		No

	On-The-Go Shifting (Yes/No/Partial)		No

	Direction Reverser; Forward/Reverse		Yes; Twin Touch Pedals

	Final Drive		Spur gear

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		---

	Clutch Disk Diameter, in. (mm) wet clutch		---

	Drawbar Tongue Weight Capacity, lb. (kg)		882 (400)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	1587-3197 (720-1450)

		Rear, lb. (kg)	4000 (1815)

	Creeper		No

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		14.8 (56.2)

		Steering	5.7 (21.6)

		Implement	9.2 (34.7)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position control

	Remote Control Valves Available		2

3-Point Hitch

	Type		Category 1

	Lift Capacity (24-in. behind link arms), lb. (kg)		2200 (999)

	Lift Capacity @ lift link ends, lb. (kg)		2530 (1149)

Power Take-Off (PTO)

	Standard		Rear @ 540

	Optional		---

	Control		Independent

	Clutch		Wet disk

	Brake (for Mid and Rear PTO)		N/A

Fluid Capacities

	Fuel Tank, gal. (l)		10.5 (39.7)

	Cooling system (includes coolant bottle), qt. (l)		5.6 (5.3)

	Crankcase with filter, qt. (l)		4.5 (4.3)

	Transmission and Hydraulic System, gal. (l) gear		---

	Transmission and Hydraulic System, gal. (l) hydrostatic		6.8 (25.7)

	Front Axle Gearcase (MFWD axle), gal. (l)		1.2 (4.5)

Final Drive

	Type		Spur Gear

	Engage On-the-Go Rear Differential Lock		Yes

4120

Engine

	Manufacturer		John Deere 4024T

		Engine HP (kW) - gross	43.0 (31.6) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	37.0 (27.6) per SAE

		PTO HP (kW) - Hydrostatic transmission	35.0 (26.1) per SAE

		Rated engine speed, rpm	2400

		Type	Diesel

		Operating range	950-2600

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		4 / 148.9 (2.44)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		86x105 (3.39x4.13)

	Compression Ratio		20:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type w/ safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		95.0 (128.8)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-14.5 (54.9)

Electrical

	Type		12 volt

	Battery Size (CCA)		770

	Alternator (12 volt, amp)		70 amp

	Starter Size, hp (kW)		2.2 (2.3)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.46 (9.3)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		PowrReverser; 12F/12R

	Opt. Transmission; Forward/Reverse		eHydro - 3 range

	Left-Hand Reverser		Yes / NA

	On-The-Go Shifting (Yes/No/Partial)		Yes / NA

	Direction Reverser; Forward/Reverse		Yes / NA

	Final Drive		Planetary

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		Two wet multi-disk / NA

	Clutch Disk Diameter, in. (mm) wet clutch		5.1 (130) / NA

	Drawbar Tongue Weight Capacity, lb. (kg)		1102 (500)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	3527 (1600) or total combined front tire capacity, whichever is less.

		Rear, lb. (kg)	5292 (2400)

	Creeper		No / Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		17.1 (64.6)

		Steering	5.1 (19.3)

		Implement	12 (45.3)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position Control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		2500 (1134)

	Lift Capacity @ lift link ends, lb. (kg)		3130 (1419)

Power Take-Off (PTO)

	Standard		Rear @ 540 RPM

	Optional		Mid @ 2100 RPM

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		14.9 (54.9)

	Cooling system (includes coolant bottle), qt. (l)		6.4 (6.2)

	Crankcase with filter, qt. (l)		8 (7.5)

	Transmission and Hydraulic System, gal. (l) gear		10.3 (38.9)

	Transmission and Hydraulic System, gal. (l) hydrostatic		9.6 (36.1)

	Front Axle Gearcase (MFWD axle), gal. (l)		1.3(5)

Final Drive

	Type		Planetary

	Engage On-the-Go Rear Differential Lock		Yes

4320

Engine

	Manufacturer		John Deere 4024T

		Engine HP (kW) - gross	48.0 (35.3) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	39.9 (29.8) per SAE

		PTO HP (kW) - Hydrostatic transmission	39.9 (29.8) per SAE

		Rated engine speed, rpm	2400

		Type	Diesel

		Operating range	950-2600

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		4 / 148.9 (2.44)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		86x105 (3.39x4.13)

	Compression Ratio		20:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type w/ safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		101.98 (138.27)

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-14.5 (54.9); Cab-13.8 (52.2)

Electrical

	Type		12 volt

	Battery Size (CCA)		770

	Alternator (12 volt, amp)		70 amp

	Starter Size, hp (kW)		2.3 (2.2)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.67 (10.1)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		PowrReverser; 12F/12R

	Opt. Transmission; Forward/Reverse		eHydro - 3 range

	Left-Hand Reverser		Yes / NA

	On-The-Go Shifting (Yes/No/Partial)		Yes / NA

	Direction Reverser; Forward/Reverse		Yes / NA

	Final Drive		Planetary

	Brakes		Multi-disk, wet

	Steering		Power steering

	Clutch; Wet/Dry		Two wet multi-disk

	Clutch Disk Diameter, in. (mm) wet clutch		5.1 (130)

	Drawbar Tongue Weight Capacity, lb. (kg)		1102 (500)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	3527 (1600) or combined capacity of front tires, whichever is less.

		Rear, lb. (kg)	5292 (2400)

	Creeper		No / Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		17.1 (64.6)

		Steering	5.1 (19.3)

		Implement	12 (45.3)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position Control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		2500 (1134)

	Lift Capacity @ lift link ends, lb. (kg)		3130 (1419)

Power Take-Off (PTO)

	Standard		Rear @ 540 RPM

	Optional		Mid @ 2100 RPM

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		Open-14.5 (54.9); Cab-13.8 (52.2)

	Cooling system (includes coolant bottle), qt. (l)		Open-6.4 (6.2); Cab-8.8 (8.4)

	Crankcase with filter, qt. (l)		8 (7.5)

	Transmission and Hydraulic System, gal. (l) gear		10.3 (38.9)

	Transmission and Hydraulic System, gal. (l) hydrostatic		9.6 (36.1)

	Front Axle Gearcase (MFWD axle), gal. (l)		1.3 (5)

Final Drive

	Type		Planetary

	Engage On-the-Go Rear Differential Lock		Yes

4520

Engine

	Manufacturer		John Deere 4024T

		Engine HP (kW) - gross	60.0 (44.1) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	52.0 (38.8) per SAE

		PTO HP (kW) - Hydrostatic transmission	50.0 (37.3) per SAE

		Rated engine speed, rpm	2400

		Type	Diesel

		Operating range	950-2600

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		4 / 148.9 (2.44)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		86x105 (3.39x4.13)

	Compression Ratio		20:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type w/ safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		112.92

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-14.5 (54.9); Cab-13.8 (52.2)

Electrical

	Type		12 volt

	Battery Size (CCA)		770

	Alternator (12 volt, amp)		70 amp

	Starter Size, hp (kW)		2.3 (2.2)

Fuel System

	Type		Direct injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		2.99 (11.3)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		PowrReverser; 12F/12R

	Opt. Transmission; Forward/Reverse		eHdyro - 3 range

	Left-Hand Reverser		Yes / NA

	On-The-Go Shifting (Yes/No/Partial)		Yes / NA

	Direction Reverser; Forward/Reverse		Yes / NA

	Final Drive		Planetary

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		Two wet multi-disk / NA

	Clutch Disk Diameter, in. (mm) wet clutch		5.1 (130) / NA

	Drawbar Tongue Weight Capacity, lb. (kg)		1102 (500)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	3527 (1600) or combined capacity of front tires, whichever is less.

		Rear, lb. (kg)	5292 (2400)

	Creeper		No / Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		17.1 (64.6)

		Steering	5.1 (19.3)

		Implement	12 (45.3)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position Control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		2500 (1134)

	Lift Capacity @ lift link ends, lb. (kg)		3130 (1419)

Power Take-Off (PTO)

	Standard		Rear @ 540 RPM

	Optional		Mid @ 2100 RPM

	Control		Independent

	Clutch		Multi-disk, wet

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		Open-14.5 (54.9); Cab-13.8 (52.2)

	Cooling system (includes coolant bottle), qt. (l)		Open-6.4 (6.2); Cab-8.8 (8.4)

	Crankcase with filter, qt. (l)		8 (7.5)

	Transmission and Hydraulic System, gal. (l) gear		10.3 (38.9)

	Transmission and Hydraulic System, gal. (l) hydrostatic		9.6 (36.1)

	Front Axle Gearcase (MFWD axle), gal. (l)		1.3 (5)

Final Drive

	Type		Planetary

	Engage On-the-Go Rear Differential Lock		Yes

4720

Engine

	Manufacturer		John Deere 4024T

		Engine HP (kW) - gross	66.0 (48.5) per ISO 97/68/EC

		PTO HP (kW) - Gear transmission	---

		PTO HP (kW) - Hydrostatic transmission	56.0 (41.8) per SAE

		Rated engine speed, rpm	2400

		Type	Diesel

		Operating range	950-2600

	Aspiration		Turbo

	Cylinders/Displacement, cu. in. (liters)		4 / 148.9 (2.44)

	Cylinder Liners		Cast-in-block

	Bore and Stroke, mm (in.)		85x105 (3.39x4.13)

	Compression Ratio		20:1

	Lubrication		Pressurized

	Cooling System		Water pump

	Air Cleaner		Dry type w/ safety element and air restriction indicator

	Engine Shutoff		Key switch

	Engine Torque @ rated speed, ft./lb. (N/m)		123.86

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Open-14.5 (54.9); Cab-13.8 (52.2)

Electrical

	Type		12 volt

	Battery Size (CCA)		770

	Alternator (12 volt, amp)		70 amp

	Starter Size, hp (kW)		2.9 (2.2)

Fuel System

	Type		Direct Injection

	Injection Pump Type		In-line with electric shutoff

	U.S. gal./hr (L/hr) @ 100% load*		3.28 (12.4)

		*Fuel consumption rate should be used for comparison purposes only.	---

Transmission

	Std. Transmission; Forward/Reverse		eHydro - 3 range

	Opt. Transmission; Forward/Reverse		---

	Left-Hand Reverser		NA

	On-The-Go Shifting (Yes/No/Partial)		NA

	Direction Reverser; Forward/Reverse		NA

	Final Drive		Planetary

	Brakes		Wet disk

	Steering		Power steering

	Clutch; Wet/Dry		NA

	Clutch Disk Diameter, in. (mm) wet clutch		NA

	Drawbar Tongue Weight Capacity, lb. (kg)		1102 (500)

	Axle Capacity (in operation)		---

		Front, lb. (kg)	3527 (1600) or combined capacity of front tires, whichever is less.

		Rear, lb. (kg)	5292 (2400)

	Creeper		Optional SpeedMatch

Hydraulics

	Type		Open Center

	Pump Rated Output, gpm (L/min.)		17.1 (64.6)

		Steering	5.1 (19.3)

		Implement	12.0 (45.3)

	Pump Type		Dual gear

	Maximum Operating Pressure (PSI)		2500

	Draft Control Type		Position Control

	Remote Control Valves Available		5

3-Point Hitch

	Type		Category I

	Lift Capacity (24-in. behind link arms), lb. (kg)		2500 (1134)

	Lift Capacity @ lift link ends, lb. (kg)		3130 (1419)

Power Take-Off (PTO)

	Standard		Rear @ 540 RPM

	Optional		Mid @ 2100

	Control		Independent

	Clutch		---

	Brake (for Mid and Rear PTO)		Multi-disk, wet

Fluid Capacities

	Fuel Tank, gal. (l)		Open-14.5 (54.9); Cab-13.8 (52.2)

	Cooling system (includes coolant bottle), qt. (l)		Open-6.4 (6.2); Cab-8.8 (8.4)

	Crankcase with filter, qt. (l)		8 (7.5)

	Transmission and Hydraulic System, gal. (l) gear		NA

	Transmission and Hydraulic System, gal. (l) hydrostatic		9.6 (36.1)

	Front Axle Gearcase (MFWD axle), gal. (l)		1.3 (5)

Final Drive

	Type		Planetary

	Engage On-the-Go Rear Differential Lock		Yes

5D/5E Utility Tractors

Click model for specs

5045D

Engine

	Manufacturer		John Deere PowerTech 3029

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		3/179 (2.9)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	16.0 (60.0)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		37 (27.3) @ 2300 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		45 (33.1) @ 2300 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		---

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Transmission

	Std. Transmission; Forward/Reverse		8F/4R

	Opt. Transmission; Forward/Reverse		---

	Reverser		No

	On-the-Go Shifting (Yes/No/Partial)		No

	Clutch; Wet/Dry		Dry

	Creeper		No

Power Take-Off (PTO)

	Standard		Independent 540

	Optional		---

	PTO Speeds @ Engine RPM		540 @ 2200

	PTO Actuation		Mechanical (lever)

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	17.4 (66)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		10.9 (41.4)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (2 opt.)

	Hitch Category (SAE Designation)		2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	2810 (1274)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Planetary

	Differential Controls		Mechanical (Pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Mechanical Wet Disc

5055D

Engine

	Manufacturer		John Deere PowerTech 3029

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		3/179 (2.9)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	16.0 (60.0)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		45 (33.1) @ 2300 per SAE

	Official PTO HP (kW) @ Rated RPM		47.39 (35.34) @ 2300

		@ Standard PTO @ Eng RPM	50.17 (37.41) @ 540 @2199

		Maximum @ Eng RPM	51.22 (38.19) @ 2100

	Advertised Engine HP (kW) @ Rated Speed		55 (41.5) @ 2300 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		140 (190) @ 1499 RPM

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		24% @ 1800

	Maximum Torque Rise % (PTO) @ Eng RPM		29.7%

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		2.98 (11.29), 15.89 (3.13)

	Standard PTO Speed @ Eng Speed		3.00 (11.25), 16.73 (3.30)

	Maximum PTO Power @ Eng RPM		2.97 (11.25), 17.24 (3.40)

Transmission

	Std. Transmission; Forward/Reverse		8F/4R

	Opt. Transmission; Forward/Reverse		---

	Reverser		No

	On-the-Go Shifting (Yes/No/Partial)		No

	Clutch; Wet/Dry		Dry

	Creeper		---

Power Take-Off (PTO)

	Standard		Independent 540

	Optional		---

	PTO Speeds @ Engine RPM		540 @ 2200

	PTO Actuation		Mechanical (lever)

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	17.4 (66)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		10.9 (41.4)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (2 opt.)

	Hitch Category (SAE Designation)		2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	2828 (1282)

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Planetary

	Differential Controls		Mechanical (Pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Mechanical Wet Disc

5045E

Engine

	Manufacturer		John Deere PowerTech 3029

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		3/179 (2.9)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	18.0 (68.0)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		37 (27.3) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		45 (33.1) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		---

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Transmission

	Std. Transmission; Forward/Reverse		9F/3R SyncShuttle

	Opt. Transmission; Forward/Reverse		---

	Reverser		No

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Dry

	Creeper		---

Power Take-Off (PTO)

	Standard		Independent 540

	Optional		---

	PTO Speeds @ Engine RPM		540 @ 2400

	PTO Actuation		Mechanical (lever)

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	18.2 (68.9)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		11.4 (43.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (2 opt.)

	Hitch Category (SAE Designation)		2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	3192 (1447)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Planetary

	Differential Controls		Mechanical (Pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5055E

Engine

	Manufacturer		John Deere PowerTech 3029

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		3/179 (2.9)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	18.0 (68.0)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		45 (33.1) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		55 (41.5) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		---

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Transmission

	Std. Transmission; Forward/Reverse		9F/3R SyncShuttle

	Opt. Transmission; Forward/Reverse		---

	Reverser		No

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Dry

	Creeper		---

Power Take-Off (PTO)

	Standard		Independent 540

	Optional		---

	PTO Speeds @ Engine RPM		540 @ 2400

	PTO Actuation		Mechanical (lever)

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	18.2 (68.9)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		11.4 (43.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (2 opt.)

	Hitch Category (SAE Designation)		2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	3192 (1447)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Planetary

	Differential Controls		Mechanical (Pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5065E

Engine

	Manufacturer		John Deere PowerTech 3029

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		3/179 (2.9)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	18.0 (68.0)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		53 (39.0) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		55.57 (41.44) @ 2400

		@ Standard PTO @ Eng RPM	56.51 (42.14) @ 2376

		Maximum @ Eng RPM	57.96 (43.22) @ 2200

	Advertised Engine HP (kW) @ Rated Speed		65 (47.8) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		155 (210) @ 1601

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		22% @ 1900

	Maximum Torque Rise % (PTO) @ Eng RPM		27.6%

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		3.58 (13.55), 15.53 (3.06)

	Standard PTO Speed @ Eng Speed		3.58 (13.55), 15.79 (3.11)

	Maximum PTO Power @ Eng RPM		3.47 (13.13), 16.70 (3.29)

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		---

	75% Load, Full Engine RPM (Unballasted)		---

	75% Load @ Reduced RPM (Unballasted)		---

Transmission

	Std. Transmission; Forward/Reverse		9F/3R

	Opt. Transmission; Forward/Reverse		9F/3R SyncShuttle

	Reverser		No

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Dry

	Creeper		---

Power Take-Off (PTO)

	Standard		Independent 540

	Optional		---

	PTO Speeds @ Engine RPM		540 @ 2400

	PTO Actuation		Mechanical (lever)

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	18.2 (68.9)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		11.4 (43.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (2 opt.)

	Hitch Category (SAE Designation)		2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3591 (1628.85)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	3192 (1447)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Planetary

	Differential Controls		Mechanical (Pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5075E

Engine

	Manufacturer		John Deere PowerTech 3029

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		3/179 (2.9)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	18.0 (68.0)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		61 (44.9) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		75 (55.0) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		---

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Transmission

	Std. Transmission; Forward/Reverse		9F/3R

	Opt. Transmission; Forward/Reverse		9F/3R SyncShuttle

	Reverser		No

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Dry

	Creeper		---

Power Take-Off (PTO)

	Standard		Independent 540

	Optional		---

	PTO Speeds @ Engine RPM		540 @ 2400

	PTO Actuation		Mechanical (lever)

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	18.2 (68.9)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		11.4 (43.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (2 opt.)

	Hitch Category (SAE Designation)		2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	3192 (1447)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Planetary

	Differential Controls		Mechanical (Pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5E Limited Series Utility Tractors

Click model for specs

5083E Limited

Engine

	Manufacturer		John Deere PowerTech 4045

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	30 (113.5)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		69 (51) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		69 (51) @ 2400

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	69.30 (51.68) @ 2200

	Advertised Engine HP (kW) @ Rated Speed		83 (61.8) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		204 lb.-ft. (276 Nm) @ 1499

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		26% @ 1900

	Maximum Torque Rise % (PTO) @ Eng RPM		41.3%

Transmission

	Std. Transmission; Forward/Reverse		12F/12R PowrReverser

	Opt. Transmission; Forward/Reverse		---

	Reverser		Yes

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		Dealer Installed Kit

Power Take-Off (PTO)

	Standard		540/540E

	Optional		540/1000 (Dealer Installed Kit)

	PTO Speeds @ Engine RPM		540E @ 1716

	PTO Actuation		Mechanical

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	22.5 (85.1)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		15.9 (60.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (opt. 3)

	Hitch Category (SAE Designation)		Category 2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3,213 (1,457)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Mechanical (pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5093E Limited

Engine

	Manufacturer		John Deere PowerTech 4045

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	30 (113.5)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		79 (59) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		79 (59) @ 2400

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		93 (69.3) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		231 @1597 (313 @1597)

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		25% @ 1900

	Maximum Torque Rise % (PTO) @ Eng RPM		37.7%

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		4.93 (18.67), 15.53 (3.06)

	Standard PTO Speed @ Eng Speed		---

	Maximum PTO Power @ Eng RPM		4.80 (18.19), 16.84 (3.32)

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		---

	75% Load, Full Engine RPM (Unballasted)		---

	75% Load @ Reduced RPM (Unballasted)		---

Transmission

	Std. Transmission; Forward/Reverse		12F/12R PowrReverser

	Opt. Transmission; Forward/Reverse		---

	Reverser		Yes

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		Dealer Installed Kit

Power Take-Off (PTO)

	Standard		540/540E

	Optional		540/1000

	PTO Speeds @ Engine RPM		540E @ 1716

	PTO Actuation		Mechanical

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	22.5 (85.1)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		15.9 (60.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (opt. 3)

	Hitch Category (SAE Designation)		Category 2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3,213 (1,457)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Mechanical (pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5101E Limited

Engine

	Manufacturer		John Deere PowerTech 4045

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		-

		Standard	30 (113.5)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		86 (64) @ 2400 per SAE

	Official PTO HP (kW) @ Rated RPM		86 (64) @ 2404

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		101 (75.3) @ 2400 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		253 @1407 (343 @1407)

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		25% @ 1902

	Maximum Torque Rise % (PTO) @ Eng RPM		39.9%

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		5.62 (21.27), 14.74 (2.90)

	Standard PTO Speed @ Eng Speed		---

	Maximum PTO Power @ Eng RPM		5.43 (20.56), 15.43 (3.04)

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		---

	75% Load, Full Engine RPM (Unballasted)		---

	75% Load @ Reduced RPM (Unballasted)		---

Transmission

	Std. Transmission; Forward/Reverse		12F/12R PowrReverser

	Opt. Transmission; Forward/Reverse		---

	Reverser		Yes

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		Dealer Installed Kit

Power Take-Off (PTO)

	Standard		540/540E

	Optional		540/1000; Dealer Installed Kit

	PTO Speeds @ Engine RPM		540E @ 1716

	PTO Actuation		Mechanical

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	22.5 (85.1)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		15.9 (60.1)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		---

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		Mechanical

	Remote Control Valves Available		1 (opt. 3)

	Hitch Category (SAE Designation)		Category 2 ; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3,213 (1,457)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Top Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Mechanical (pedal)

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5M Series Utility Tractors

Click model for specs

5065M

Engine

	Manufacturer		John Deere PowerTech 5030

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		5/186 (3.05)

	Cylinder Liners		---

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	21 (80) ; 30 (114)

		Optional	29 (110); 38 (144)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		50 (37.3) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		65 (48.4) @ 2200 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		270 @ 1400

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		32 @ 1400

Transmission

	Std. Transmission; Forward/Reverse		16F/16R SyncReveser

	Opt. Transmission; Forward/Reverse		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

	Reverser		Left Hand, Mechanical

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

Power Take-Off (PTO)

	Standard		Independent 540/540 Economy

	Optional		540/540E/1000

	PTO Speeds @ Engine RPM		540 @ 2100; 540E @ 1645

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	20.9 (79.1)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		14.6 (55.4)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		22.3 (16.6)

	Hitch Draft Control Load Sense Type		Mechanical or Electrohydraulic

	Remote Control Valves Available		Up to 3

	Hitch Category (SAE Designation)		2; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3595 (1631)

		Optional	4498 (2041)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Lower Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Electro-hydraulic

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5075M

Engine

	Manufacturer		John Deere PowerTech 5030

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		5/186 (3.05)

	Cylinder Liners		---

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	21 (80) ; 30 (114)

		Optional	29 (110); 38 (144)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		60 (44.7) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		75 (55.9) @ 2200 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		300 @ 1400

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		26 @ 1400

Transmission

	Std. Transmission; Forward/Reverse		16F/16R SyncReveser

	Opt. Transmission; Forward/Reverse		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

	Reverser		Left Hand, Mechanical

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

Power Take-Off (PTO)

	Standard		Independent 540/540 Economy

	Optional		540/540E/1000

	PTO Speeds @ Engine RPM		540 @ 2100; 540E @ 1645

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	20.9 (79.1)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		14.6 (55.4)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		22.3 (16.6)

	Hitch Draft Control Load Sense Type		Mechanical or Electrohydraulic

	Remote Control Valves Available		up to 3

	Hitch Category (SAE Designation)		2; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3595 (1631)

		Optional	4498 (2041)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Lower Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Electrohydraulic

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5085M

Engine

	Manufacturer		John Deere PowerTech M 4045

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	29 (110); 38 (144)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		70 (52.2) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		85 (63.3) @ 2200 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		331 @ 1600

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		35 @ 1600

Transmission

	Std. Transmission; Forward/Reverse		16F/16R SyncReveser

	Opt. Transmission; Forward/Reverse		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

	Reverser		Left Hand, Mechanical

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

Power Take-Off (PTO)

	Standard		Independent 540/540 Economy

	Optional		540/540E/1000

	PTO Speeds @ Engine RPM		540 @ 2100; 540E @ 1645

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	24.7 (93.6)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		18.4 (69.9)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		31.1 (23.2)

	Hitch Draft Control Load Sense Type		Mechanical or Electrohydraulic

	Remote Control Valves Available		0 (opt. 3)

	Hitch Category (SAE Designation)		2; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3595 (1631)

		Optional	4498 (2041)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Lower Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Electrohydraulic

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5095M

Engine

	Manufacturer		John Deere PowerTech M 4045

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	29 (110); 38 (144)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		80 (59.6) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		95 (70.8) @ 2200 per 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		372 @ 1600

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		26 @ 1600

Transmission

	Std. Transmission; Forward/Reverse		16F/16R SyncReveser

	Opt. Transmission; Forward/Reverse		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

	Reverser		Left Hand, Mechanical

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus

Power Take-Off (PTO)

	Standard		Independent 540/540 Economy

	Optional		540/540E/1000

	PTO Speeds @ Engine RPM		540 @ 2100; 540E @ 1645

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	24.7 (93.6)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		18.4 (69.9)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		31.1 (23.2)

	Hitch Draft Control Load Sense Type		Mechanical or Electrohydraulic

	Remote Control Valves Available		0 (opt. 3)

	Hitch Category (SAE Designation)		2; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	3595 (1631)

		Optional	4498 (2041)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Lower Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Electrohydraulic

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

5105M

Engine

	Manufacturer		John Deere PowerTech E 4045

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet Sleeved

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	29 (110) ; 38 (144)

		Optional	---

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		90 (67.1) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		105 (78.3) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		---

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		420 @ 1400

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		---

	Maximum Torque Rise % (PTO) @ Eng RPM		30 @ 1400

Transmission

	Std. Transmission; Forward/Reverse		16F/16R PowrReveser

	Opt. Transmission; Forward/Reverse		32F/16R PowrReverser Plus

	Reverser		Left Hand, Electrohydraulic

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		16F/16R PowrReverser, 32F/16R PowrReverser Plus

Power Take-Off (PTO)

	Standard		Independent 540/540 Economy

	Optional		540/540E/1000

	PTO Speeds @ Engine RPM		540 @ 2100; 540E @ 1645

	PTO Actuation		Electro-hydraulic

Hydraulics

	Type		Open Center

	Pump Rated Output, GPM (L/min.)		---

		Standard	24.7 (93.6)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		18.4 (69.9)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		31.1 (23.2)

	Hitch Draft Control Load Sense Type		Mechanical or Electro-hydraulic

	Remote Control Valves Available		up to three

	Hitch Category (SAE Designation)		2; convertible to 1

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	4498 (2041)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Lower Link

	Joystick SCV Control		Optional

Final Drive

	Type		Inboard Planetary

	Differential Controls		Electro-hydraulic

	Availability		---

		Front	No

		Front & Rear	No

	Engage On-the-Go Rear Differential Lock		Yes

	Axle Type		Flanged

	Brakes, Type and Control		Hydraulic Wet Disc

Attachments for Utility Tractors

Click model for specs

2000 Series

Hay
- Frontier Hay Tedders
Landscaping
- 3-Bag Power Flow Material Collection System
- 52-inch Quick-Hitch Rotary Broom
- 54-inch Front Blade
- 55-gal. 3-point PTO Sprayer - 12-ft boom
- 55-gal. 3-point PTO Sprayer - 30-ft boom
- 60-inch Heavy-Duty Rotary Broom
- Frontier Box Blades
- Frontier Core Aerators
- Frontier Drawn Box Scrapers
- Frontier Land Planes
- Frontier Landscape Rakes
- Frontier Power Rakes
- Frontier Post Hole Augers
- Frontier Post Hole Diggers
- Frontier Rear Blades
- Frontier Soil Pulverizers
- Frontier Wood Chippers
Livestock & Equine
- Frontier Manure Spreaders
- Frontier Arena Rakes
Loading & Digging
- 46 Backhoe
- 200X Loader
- 200CX Loader
- 260 Backhoe
Mowing & Cutting
- 3-Bag Power Flow Material Collection System
- 54C Mid-Mount Side Discharge Mower
- 54D OnRamp Mid-Mount Mower
- 62C Mid-Mount Side Discharge Mower
- 62D OnRamp Mid-Mount Mower
- 72-inch Mid-Mount Mower
- Frontier Grooming Mowers
- Frontier Rotary Cutters
- Frontier Sickle Bar Mowers
Seeding
- Frontier Core Aerators
- Frontier Broadcast Spreaders
- Frontier Pendular Spreaders
Snow Removal
- 47-inch Snow Blower
- 52-inch Quick-Hitch Rotary Broom
- 54-inch Front Blade
- 54-inch Snow Blower
- 60-inch Heavy-Duty Rotary BRoom
- Frontier Snow Blowers
Tillage
- 647 Tiller
- 655 Tiller
- Frontier Disk Harrows
- Frontier Plows
- Frontier Field Cultivators
- Frontier Middle Busters
- Frontier Subsoilers
- Frontier Rotary Tillers

3000 Series

Hay
- Frontier Bale Unrollers
- Frontier Disc Mowers
- Frontier Rotary Rakes
- Frontier Hay Tedders
- Frontier Wheel Rakes
Landscaping
- 55-gal. 3-point PTO Sprayer - 12-ft boom
- 55-gal. 3-point PTO Sprayer - 30-ft boom
- 60-inch Heavy-Duty Rotary Broom
- 366 Front Blade
- 380A Front Blade
- Frontier Box Blades
- Frontier Core Aerators
- Frontier Drawn Box Scrapers
- Frontier Land Planes
- Frontier Landscape Rakes
- Frontier Power Rakes
- Frontier Post Hole Augers
- Frontier Post Hole Diggers
- Frontier Rear Blades
- Frontier Soil Pulverizers
- Frontier Wood Chippers
Livestock & Equine
- Frontier Free-Stall Scrapers
- Frontier Manure Spreaders
- Frontier Arena Rakes
Loading & Digging
- 7 Backhoe
- 300 Loader
- 300X Loader
- 305 Loader
- 375 Backhoe
- 485 Backhoe
Mowing & Cutting
- 25A Flail Mower
- 60D AutoConnect Mid-Mount Mower
- 60-inch 7-Iron Mid-Mount Mower
- 72D AutoConnect Mid-Mount Mower
- 72-inch 7-Iron Mid-Mount Mower
- 360 Flail Mower
- Frontier Grooming Mowers
- Frontier Rotary Cutters
- Frontier Sickle Bar Mowers
- MX5 Rotary Cutter
Seeding
- Frontier Core Aerators
- Frontier Food Plot Seeders
- Frontier Broadcast Spreaders
- Frontier Pendular Spreaders
- Frontier Overseeders
Snow Removal
- 59-inch Snow Blower
- 60-inch Heavy-Duty Rotary Broom
- 366 Front Blade
- 380A Front Blade
- Frontier Front Blades
- Frontier Snow Blowers
Tillage
- 647 Tiller
- 655 Tiller
- 673 Tiller
- Frontier Disk Harrows
- Frontier Plows
- Frontier Field Cultivators
- Frontier Middle Busters
- Frontier Subsoilers
- Frontier Rotary Tillers

4000 Series

Hay
- Frontier Bale Unrollers
- Frontier Disc Mowers
- Frontier Rotary Rakes
- Frontier Hay Tedders
- Frontier Wheel Rakes
Landscaping
- 55-gal. 3-point PTO Sprayer - 12-ft boom
- 55-gal. 3-point PTO Sprayer - 30-ft boom
- Frontier Box Blades
- Frontier Core Aerators
- Frontier Drawn Box Scrapers
- Frontier Land Planes
- Frontier Landscape Rakes
- Frontier Power Rakes
- Frontier Post Hole Augers
- Frontier Post Hole Diggers
- Frontier Rear Blades
- Frontier Soil Pulverizers
- Frontier Wood Chippers
Livestock & Equine
- Frontier Free-Stall Scrapers
- Frontier Manure Spreaders
- Frontier Arena Rakes
Loading & Digging
- 8B Backhoe
- 375 Backhoe
- 400CX Loader
- 400X Loader
- 485 Backhoe
Mowing & Cutting
- 25A Flail Mower
- 72-inch 7-Iron Mid-Mount Mower
- 360 Flail Mower
- 370 Flail Mower
- Frontier Grooming Mowers
- Frontier Rotary Cutters
- Frontier Sickle Bar Mowers
- MX5 Rotary Cutter
- MX6 Rotary Cutter
- MX8 Rotary Cutter
Seeding
- Frontier Core Aerators
- Frontier Food Plot Seeders
- Frontier Broadcast Spreaders
- Frontier Pendular Spreaders
- Frontier Overseeders
Snow Removal
- Frontier Front Blades
- Frontier Snow Blowers
Tillage
- 647 Tiller
- 655 Tiller
- 665 Tiller
- 673 Tiller
- 681 Tiller
- Frontier Disk Harrows
- Frontier Rotary Tillers

5000 Series

Hay
- Frontier Bale Unrollers
- Frontier Disc Mowers
- Frontier Hay Mergers
- Frontier Rotary Rakes
- Frontier Hay Tedders
- Frontier Wheel Rakes
Landscaping
- Frontier Box Blades
- Frontier Core Aerators
- Frontier Drawn Box Scrapers
- Frontier Land Planes
- Frontier Landscape Rakes
- Frontier Power Rakes
- Frontier Post Hole Augers
- Frontier Post Hole Diggers
- Frontier Rear Blades
- Frontier Soil Pulverizers
- Frontier Wood Chippers
Livestock & Equine
- Frontier Free-Stall Scrapers
- Frontier Bale Processors
- Frontier Manure Spreaders
- Frontier Arena Rakes
Loading & Digging
- 512 Loader
- 553 Loader
- 563 Loader
- 595 Backhoe
Mowing & Cutting
- 25A Flail Mower
- 360 Flail Mower
- 370 Flail Mower
- 390 Flail Mower
- Frontier Grooming Mowers
- Frontier Flex-Wing Grooming Mowers
- Frontier Rotary Cutters
- Frontier Sickle Bar Mowers
- MX5 Rotary Cutter
- MX6 Rotary Cutter
- Mx8 Rotary Cutter
Seeding
- Frontier End-Wheel Grain Drills
- Frontier No-Till Grain Drills
- Frontier Core Aerators
- Frontier Conservation Seeders
- Frontier Food Plot Seeders
- Frontier Broadcast Spreaders
- Frontier Pendular Spreaders
- Frontier Overseeders
Snow Removal
- Frontier Front Blades
- Frontier Snow Blowers
Tillage
- Frontier Disk Harrows
- Frontier Rotary Tillers

EZtrak™ Series Zero-Turn Mowers

Click model for specs

Z225

Engine

	Power		18.5 hp (13.8 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		30.5 cu. in. (500 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		One

	Lubrication		Full pressure with replaceable filter, 1.25 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		2.7 (10.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear EZT w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		0-7 (0-11.3)

	Reverse speed, mph (km/h)		0-3.5 (0-5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		18x8.50-8

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		15 in. medium-back

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		42 in.

	Type		Side discharge

	Mower deck material		42X = 12 gauge, 0.105 in. (2.7 mm)

	Mower drive system		V-belt

Z245

Engine

	Power		23 hp (17.2 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (724 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.75 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		2.7

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear EZT w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		0-7 (0-11.3)

	Reverse speed, mph (km/h)		0-3.5 (0-5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		18x9.50-8

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		15 in. medium-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		48 in.

	Type		Side discharge

	Mower deck material		48X = 11 gauge, 0.120 in. (3 mm)

	Mower drive system		V-belt

Z425, 48-inch deck

MODEL			John Deere EZtrak Z425 - 48 in. (2011)

Engine

	Power		23 hp (17.2 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (724 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.75 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		3.5 (13.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear ZT2800 w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		8.5 (13.7)

	Reverse speed, mph (km/h)		3.5 (5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		22x9.50-10

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		15 in. medium-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		48 in.

	Type		Side discharge

	Mower deck material		48X = 11 gauge, 0.120 in. (3 mm)

	Mower drive system		V- belt

Z425, 54-inch deck

Engine

	Power		23 hp (17.2 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (724 cc)

	Manufacturer		Briggs & Stratton

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.75 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		3.5 (13.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear ZT2800 w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		8.5 (13.7)

	Reverse speed, mph (km/h)		3.5 (5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		22x9.50-10

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		15 in. medium-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		54 in.

	Type		Side discharge

	Mower deck material		54X = 10 gauge, 0.135 in. (3.4 mm)

	Mower drive system		V- belt

Z445, 48-inch deck

Engine

	Power		27 hp (20.1 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		42.2 cu in. (724 cc)

	Manufacturer		Briggs & Stratton Cyclonic

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.75 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		3.5 (13.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear ZT2800 w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		8.5 (13.7)

	Reverse speed, mph (km/h)		3.5 (5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		22x9.50-10

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		17 in. medium-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		48 in.

	Type		Side discharge

	Mower deck material		48X = 11 gauge, 0.120 in. (3 mm)

	Mower drive system		V- belt

Z445, 54-inch deck

Engine

	Power		27 hp (20.1 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (724 cc)

	Manufacturer		Briggs & Stratton Cyclonic

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.75 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		3.5 (13.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear ZT2800 w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		8.5 (13.7)

	Reverse speed, mph (km/h)		3.5 (5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		22x9.50-10

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		17 in. medium-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		54 in.

	Type		Side discharge

	Mower deck material		54X = 10 gauge, 0.135 in. (3.4 mm)

	Mower drive system		V- belt

Z445, 54-inch high-capacity deck

Engine

	Power		25 hp (18.6 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		41.2 cu in. (675 cc)

	Manufacturer		Kawasaki

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.6 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		3.5 (13.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		N/A

	Hydraulic pumps		Kanzaki Dup-10

	Wheel motors		Parker

Travel speed

	Forward speed, mph (km/h)		8.5 (13.7)

	Reverse speed, mph (km/h)		3.5 (5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		22x9.50-10

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		18 in. high-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		---

Lift system

	Type		Foot and hand lift

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		54 in.

	Type		Side discharge

	Mower deck material		54 HC = 9 gauge, .150 in. (3.8 mm)

	Mower drive system		V- belt

Z465

Engine

	Power		27 hp (20.1 kW)*

		Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.	---

	Displacement		44.2 cu in. (724 cc)

	Manufacturer		Briggs & Stratton Cyclonic

	Cylinders		V-twin

	Lubrication		Full pressure with replaceable filter, 1.75 qt capacity

	Type		OHV

	Battery		12 volt, 235 cold-crank amps

	Choke/speed control		Single lever

	Cooling method		Air

	Fuel tank capacity, U.S. gallon		3.5 (13.2 L)

	Fuel gauge		Fuel level sight line

Drive train

	Dual hydros		Hydro-Gear ZT2800 w/1-in. axles

	Hydraulic pumps		N/A

	Wheel motors		N/A

Travel speed

	Forward speed, mph (km/h)		8.5 (13.7)

	Reverse speed, mph (km/h)		3.5 (5.6)

	Speed and direction control		Twin levers

	Control adjustment		3-height / 5-fore-aft

Chassis

	Frame		Heavy-duty frame tubing

	Primer/paint		E-coat/powder

	Front caster tires		13x5.0-6

	Front caster bearings		Sealed ball bearings

	Drive tires		22x9.50-10

	Hourmeter		Yes

	Service interval decal		Yes

	Storage compartment		Yes

	Cup holder		Yes

Seat

	Seat back height		17 in. medium-back w/armrests

	Fore-aft adjustment		3 in. while seated

	Seat suspension		2 springs

Lift system

	Type		Hand lever

	Mower cut height		1-4 in.

	Cut height increments		0.25 in.

	Preset cut height		Yes

Mower deck

	Width of cut		62 in.

	Type		Side discharge

	Mower deck material		62X = 10 gauge, 0.135 in. (3.4 mm)

	Mower drive system		V- belt

2011 Gator XUV Utility Vehicles

Click model for specs

XUV 625i

Engine and Electrical

	Type		4-cycle gas, Electronic Fuel Injection (EFI)

	Cylinders		2

	Valving		OHV

	Horsepower*		23 (17.2 kw)*

	Displacement		617 cc

	Maximum torque, ft.-lb. (Nm)		34.6 (46.9) @ 2100 rpm

	Iginition type		Solid state 12V

	Lubrication		Full pressure

	Oil filter		Screw on filter

	RPM, idle (no load)		1125 +/- 75

	RPM, fast (no load)		Electronically controlled

	Cooling system		Liquid

	Air cleaner		Dry replaceable single element w/remote intake

	Muffler		Spark-arresting

	Battery		340CCA

	Alternator		25.5 amp @ 3200 rpm, regulated, 306 watts

	Headlights		Two 37.5 watt halogen

Fuel System

	Capacity, U.S. gal. (L)		5.3 (20.1)

	Consumption (half load at avg. speed), U.S. gal./hr. (L/h)		0.7 (2.65)

	Fuel pump type		Electric

4WD

	System Type		On-demand true four-wheel drive system

	Front Differential (Engagement)		Auto-locking (on/off rocker switch)

	Rear Differential (Engagement)		Positive locking, mechanically actuated (hand-operated)

Transmission

	Type		Continuously Variable Transmission (CVT) with clutch enclosure

	Drive belt		Spun top cog, 31 mm wide

	Ground speed, mph (km/h)		0-30 (0-48) Hi Forward, 0-17 (0-27) Lo Forward, 0-20 (0-32) Reverse

	Transaxle		Two speed, oil bath

	Gear Selection		Forward (hi-lo), Netural, Reverse

	Overall Reduction Ratio:		---

		Low	86.8488:1

		High	42.1430:1

		Reverse	75.9333:1

	Brakes		Front/rear hydraulic disk

	Park brake		Driveline mechanical disk, hand operated

	Bearings		Sealed, double-row ball

	Axle		27 mm dia., forged CV-shaft with Double Offset Joint

Suspension and Steering

	Suspension, front		Fully Independent Dual A-Arm with adjustable coils

	Front Susp. Travel (total), in. (mm)		8 (203)

	Suspension, rear		Fully Independent Dual A-Arm with adjustable coils and sway bar

	Rear Susp. Travel (total), in. (mm)		9 (229)

	Steering		Rack and Pinion

	Turning radius, ft. (m)		12.4 (3.8)

XUV 825i

Engine and Electrical

	Type		4-cycle gas, Electronic Fuel Injection (EFI)

	Cylinders		3

	Valving		Dual Overhead Cam (DOHC)

	Horsepower*		50 (37 kw)* @ 6000 rpm

	Displacement		812 cc

	Maximum torque, ft.-lb. (Nm)		47 (64) @ 3200 rpm

	Iginition type		Solid state 12V

	Lubrication		Full pressure

	Oil filter		Screw on filter

	RPM, idle (no load)		1125 +/- 75

	RPM, fast (no load)		Electronically controlled

	Cooling system		Liquid

	Air cleaner		Dry replaceable single element w/remote intake

	Muffler		Spark-arresting

	Battery		340CCA

	Alternator		75 amp @ 6000 rpm, regulated

	Headlights		Two 27 watt halogen

Fuel System

	Capacity, U.S. gal. (L)		5.3 (20.1)

	Consumption (half load at avg. speed), U.S. gal./hr. (L/h)		0.7 (2.65)

	Fuel pump type		Electric

4WD

	System Type		On-demand true four-wheel drive system

	Front Differential (Engagement)		Auto-locking (on/off rocker switch)

	Rear Differential (Engagement)		Positive locking, mechanically actuated (hand-operated)

Transmission

	Type		Continuously Variable Transmission (CVT) with clutch enclosure

	Drive belt		Spun top cog, 31 mm wide

	Ground speed, mph (km/h)		0-44 (0-71) Hi Forward, 0-17 (0-27) Lo Forward, 0-20 (0-32) Reverse

	Transaxle		Two speed, oil bath

	Gear Selection		Forward (hi-lo), Netural, Reverse

	Overall Reduction Ratio:		---

		Low	86.8488:1

		High	42.1430:1

		Reverse	75.9333:1

	Brakes		Front/rear hydraulic disk

	Park brake		Driveline mechanical disk, hand operated

	Bearings		Sealed, double-row ball

	Axle		27 mm dia., forged CV-shaft with Double Offset Joint

Suspension and Steering

	Suspension, front		Fully Independent Dual A-Arm with adjustable coils

	Front Susp. Travel (total), in. (mm)		8 (203)

	Suspension, rear		Fully Independent Dual A-Arm with adjustable coils and sway bar

	Rear Susp. Travel (total), in. (mm)		9 (229)

	Steering		Rack and Pinion

	Turning radius, ft. (m)		12.4 (3.8)

XUV 855D

Engine and Electrical

	Type		4-cycle diesel

	Cylinders		3

	Valving		OHV

	Horsepower*		24.6 (18.3 kw)*

	Displacement		854 cc

	Maximum torque, ft.-lb. (Nm)		36.9 (50) @ 2400 rpm

	Iginition type		Compression ignition

	Lubrication		Full pressure

	Oil filter		Screw on filter

	RPM, idle (no load)		1050 +/- 25

	RPM, fast (no load)		3700 +/- 25

	Cooling system		Liquid

	Air cleaner		Dry, replaceable single element with remote intake

	Muffler		---

	Battery		480CCA

	Alternator		40 amp @ 3200 rpm regulated, 540 watts

	Headlights		Two 37.5 watt halogen

Fuel System

	Capacity, U.S. gal. (L)		5.3 (20.1)

	Consumption (half load at avg. speed), U.S. gal./hr. (L/h)		0.5 (1.89)

	Fuel pump type		Electric

4WD

	System Type		On-demand true four-wheel drive system

	Front Differential (Engagement)		Auto-locking (On/off rocker switch)

	Rear Differential (Engagement)		Positive locking, mechanically actuated (hand-operated)

Transmission

	Type		Continuously Variable Transmission (CVT) with fully enclosed clutch

	Drive belt		Spun top cog, 31 mm wide

	Ground speed, mph (km/h)		0-32 (0-51) Hi Forward, 0-15 (0-24) Lo Forward, 0-17 (0-27) Reverse

	Transaxle		Two speed, oil bath

	Gear Selection		Forward (hi-lo), Netural, Reverse

	Overall Reduction Ratio:		---

		Low	86.8488:1

		High	86.8488:1

		Reverse	75.9333:1

	Brakes		Front/rear hydraulic disk

	Park brake		Hand-operated, sealed wet disk

	Bearings		Sealed, double-row ball

	Axle		27 mm dia., forged CV-shaft with Double Offset Joint

Suspension and Steering

	Suspension, front		Fully Independent Dual A-Arm with adjustable coils

	Front Susp. Travel (total), in. (mm)		8 (203)

	Suspension, rear		Fully Independent Dual A-Arm with adjustable coils and sway bar

	Rear Susp. Travel (total), in. (mm)		9 (229)

	Steering		Rack and Pinion

	Turning radius, ft. (m)		12.4 (3.8)

Gator HPX 4x4 Utility Vehicles

Click model for specs

HPX 4x4

Engine and Electrical

	Type		4-cycle gas

	Cylinders		2

	Valving		OHV

	Horsepower*		20 (15 kw)*

	Displacement		617 cc

	Maximum torque, ft.-lb. (Nm)		32 (44.4) @ 2500 rpm

	Iginition type		Solid state 12V

	Lubrication		Full pressure

	Oil filter		Screw on filter

	RPM, idle (no load)		1125 +/- 75

	RPM, fast (no load)		3750 +/- 75

	Cooling system		Liquid

	Air cleaner		Dry replaceable single element w/remote intake

	Muffler		Spark-arresting

	Battery		340CCA

	Alternator		21 amp @ 3200 rpm, regulated, 252 watts

	Headlights		Two 37.5 watt halogen

Fuel System

	Capacity, U.S. gal. (L)		5.3 (20.1)

	Consumption (half load at avg. speed), U.S. gal./hr. (L/h)		0.6 (2.27)

	Fuel pump type		Electric

4WD

	System Type		On-demand true four-wheel drive system

	Front Differential (Engagement)		Auto-locking (on/off rocker switch)

	Rear Differential (Engagement)		Positive locking, mechanically actuated (hand-operated)

Transmission

	Type		Continuously Variable Transmission (CVT)

	Drive belt		Spun top cog, 31 mm wide

	Ground speed, mph (km/h)		0-25 (0-40) forward, 0-12 (0-19) reverse

	Transaxle		Two speed, oil bath

	Gear Selection		Forward (hi-lo), Netural, Reverse

	Overall Reduction Ratio:		---

		Low	94.4818:1

		High	41.8902:1

		Reverse	81.6261:1

	Brakes		Front/rear hydraulic disk

	Park brake		Rear mechanical disk, hand operated

	Bearings		Sealed, single-row ball

	Axle		33 mm dia. forged, splined shaft

Suspension and Steering

	Suspension, front		Independent with McPherson Strut

	Front Susp. Travel (total), in. (mm)		5.15 (131)

	Suspension, rear		Coil over shock

	Rear Susp. Travel (total), in. (mm)		3.5 (90)

	Steering		Rack and Pinion

	Turning radius, ft. (m)		11 (3.35)

HPX 4x4 Diesel

Engine and Electrical

	Type		4-cycle diesel

	Cylinders		3

	Valving		OHV

	Horsepower*		20.8 (15.5 kw)*

	Displacement		854 cc

	Maximum torque, ft.-lb. (Nm)		33 (45) @ 3350 rpm

	Iginition type		Solid state 12V

	Lubrication		Full pressure

	Oil filter		Screw on filter

	RPM, idle (no load)		1050 +/- 50

	RPM, fast (no load)		3650 +/- 50

	Cooling system		Liquid

	Air cleaner		Dry, replaceable dual element with remote intake

	Muffler		Spark-arresting

	Battery		480CCA

	Alternator		40 amp @ 3200 rpm regulated

	Headlights		Two 37.5 watt halogen

Fuel System

	Capacity, U.S. gal. (L)		5.3 (20.1)

	Consumption (half load at avg. speed), U.S. gal./hr. (L/h)		0.25 (0.95)

	Fuel pump type		Mechanical

4WD

	System Type		On-demand true four-wheel drive system

	Front Differential (Engagement)		Auto-locking (On/off rocker switch)

	Rear Differential (Engagement)		Positive locking, mechanically actuated (hand-operated)

Transmission

	Type		Continuously Variable Transmission (CVT)

	Drive belt		Spun top cog, 31 mm wide

	Ground speed, mph (km/h)		0-25 (0-40) forward, 0-12 (0-19) reverse

	Transaxle		Two speed, oil bath

	Gear Selection		Forward (hi-lo), Netural, Reverse

	Overall Reduction Ratio:		---

		Low	94.4818:1

		High	41.8902:1

		Reverse	81.6261:1

	Brakes		Front/rear hydraulic disk

	Park brake		Rear mechanical disk, hand operated

	Bearings		Sealed, single-row ball

	Axle		33 mm diameter forged, splined shaft

Suspension and Steering

	Suspension, front		Independent with McPherson Strut

	Front Susp. Travel (total), in. (mm)		5.15 (131)

	Suspension, rear		Coil over shock

	Rear Susp. Travel (total), in. (mm)		3.5 (90)

	Steering		Rack and Pinion

	Turning radius, ft. (m)		11 (3.35)

Gator T Model Utility Vehicles

Click model for specs

TS 4x2

Engine and Electrical

	Type		4-cycle gas

	Ignition		Magneto, solid state 12V

	Cylinders		1

	Cooling		Air

	Valving		Overhead valves

	Horsepower*		11.1 (8.3 kw)*

	Displacement		351 cc (21.4 cu. in.)

	Lubrication		Full Pressure

	Oil filter		Replaceable (standard)

	RPM, idle (no load)		1125 +/-75

	RPM, fast (no load)		3850 +/-75

	Air cleaner		Dry replaceable single element w/intake

	Maximum torque		17.4 lb.-ft @ 2500 rpm

	Battery		38amp/hr, 340 cca

	Headlights		Two 37.5 watt halogens

	Muffler		Spark arresting

	Alternator		13 amp regulated

	Steering		---

Brakes

	Type		Wet disk in transaxle

	Park brake		Wet disk, hand operated

Tires

	Front		Two 22.5x10.00-8, 2 PR hi-flotation

	Rear		Two 25x12.00-9, 2 PR hi-flotation

	Available tread types		Knobby, Turf, HDAP, Run-flat

Weight, lb.

	Dry		--

	Including Fuel/Fluids		915 lb (415 kg)

Dimensions

	Seating capacity		2

	Seat type		Standard medium back, tilt forward

	Seat adjustment		Optional driver's seat

	Front tread centers, in.		50.0 (1270 mm)

	Height, in.		43.6 (1108 mm)

	Width, in.		60 (1525 mm)

	Length, in.		--

		Without Bumper	101.4 (2576 mm)

		With Bumper	104.0 (2746 mm)

	Ground clearance		--

		Under foot platform	9.8 (250 mm)

		Under transaxle	6.0 (152.4 mm)

	Payload capacity, lb.		900 (408 kg)

	Rear Tread Centers, in.		48 (1220 mm)

	Towing capacity, lb.		900 (408 kg)

	Turning clearance circle, ft.-in.		---

	Wheelbase, in.		69.7 (1770 mm)

Cargo Box

	Material		16 gauge steel

	Electric lift		Optional

	Capacity, lb.		500 (227 kg)

	Depth, in.		9 (229 mm)

	Length, in.		39.5 (1003 mm)

	Volume, cu. ft.		10.1 (0.29 cu.m)

	Width, in.		49 (1245 mm)

	Height above ground, in.		25 (635 mm)

	Tailgate		Hinged at bottom, removable

Fuel System

	Capacity, U.S. gal.		5 (18.9 L)

	Fuel consumption (approx.) at half load and average speed, U.S. gal.		0.45 gal/hr (1.7 L/hr)

	Fuel pump type		Pulse

Suspension and Steering

	Front		Independent spring over shock, single A-arm

		Total travel	5 in. (127 mm)

	Rear		Two high-floatation, low pressure tires (solid axles)

		Total travel	N/A

	Steering		Rack and pinion

	Turning radius, ft. (m)		11.25 (3.5 m)

TX 4x2

Engine and Electrical

	Type		4-cycle gas

	Ignition		Magneto, solid state 12V

	Cylinders		2

	Cooling		Air

	Valving		Overhead valves

	Horsepower*		19 (14.2 kw)*

	Displacement		675 cc (41.2 cu. in.)

	Lubrication		Full pressure

	Oil filter		Screw on filter

	RPM, idle (no load)		1125 +/-75

	RPM, fast (no load)		3850 +/-75

	Air cleaner		Dry replaceable single element w/intake

	Maximum torque		37.0 lb-ft @2400 rpm

	Battery		38amp/hr, 340 cca

	Headlights		Two 37.5 watt halogens

	Muffler		Spark arresting

	Alternator		16.6 amp regulated

	Steering		---

Brakes

	Type		All-wheel hydraulic disc

	Park brake		Rear mechanical disc, hand operated

Tires

	Front		Two 22x9.50-10, 4 PR,

	Rear		Two 24x10.50-10 HPAP, 24x12-10 Turf/Hard Surface & HPAT

	Available tread types		High Performance All Purpose, Turf/Hard Surface, Extreme Terrain, Run Flats

Weight, lb.

	Dry		---

	Including Fuel/Fluids		1120 lbs (508 kg)

Dimensions

	Seating capacity		2

	Seat type		Professional High Back, tilt forward

	Seat adjustment		Optional

	Front tread centers, in.		50 (1270 mm)

	Height, in.		43.6 (1108 mm)

	Width, in.		60 (1525 mm)

	Length, in.		---

		Without Bumper	109.6 (2788 mm)

		With Bumper	112.1 (2847 mm)

	Ground clearance		---

		Under foot platform	10.6 (270 mm)

		Under transaxle	5.7 (145 mm)

	Payload capacity, lb.		1000 (454 kg)

	Rear Tread Centers, in.		48 (1219.3 mm)

	Towing capacity, lb.		1000 (454 kg)

	Turning clearance circle, ft.-in.		---

	Wheelbase, in.		72.5 (1841 mm)

Cargo Box

	Material		Polypropylene side panels and tailgate; steel floor and load guard

	Electric lift		Optional

	Capacity, lb.		600 (272 kg)

	Depth, in.		12 (304.8 mm)

	Length, in.		45 (1143 mm)

	Volume, cu. ft.		16.4 (0.46 cu. m)

	Width, in.		52 (1320 mm)

	Height above ground, in.		30 (762 mm)

	Tailgate		Hinged at bottom, removable; side panels are removable

Fuel System

	Capacity, U.S. gal.		5 (18.9 L)

	Fuel consumption (approx.) at half load and average speed, U.S. gal.		0.35 U.S. gph (1.3 L/h)

	Fuel pump type		Pulse

Suspension and Steering

	Front		Independent spring over shock, single A-arm

		Total travel	5 in. (127 mm)

	Rear		Semi-independent coil over shock (COS) system

		Total travel	3 in. (76.2 mm)

	Steering		Rack and pinion

	Turning radius, ft. (m)		12 (3.65)

TH 6x4 Gas

Engine and Electrical

	Type		4 cycle gas

	Ignition		Magneto, solid state 12V

	Cylinders		2

	Cooling		Air

	Valving		Overhead valves

	Horsepower*		19 (14.2 kw)*

	Displacement		675 cc (41.2 cu. in.)

	Lubrication		Full pressure lube

	Oil filter		Screw-on filter

	RPM, idle (no load)		1125 +/- 75

	RPM, fast (no load)		3850 +/- 75

	Air cleaner		Dry replaceable single element w/intake

	Maximum torque		37.0 lb-ft @ 2400 rpm

	Battery		38 amp/hr, 340 cca

	Headlights		Two 37.5 watt halogens

	Muffler		Spark arresting

	Alternator		16.6 amp regulated

	Steering		---

Brakes

	Type		Wet disk in transaxle

	Park brake		Wet disk, hand operated

Tires

	Front		Two 22.5x10.00-8, 2 PR hi-flotation

	Rear		Four 25x12.00-9, 2 PR hi-flotation

	Available tread types		Knobby, Turf, HDAP, Run-Flat

Weight, lb.

	Dry		---

	Including Fuel/Fluids		1087 (493 kg)

Dimensions

	Seating capacity		2

	Seat type		Professional high back

	Seat adjustment		Optional, driver's side

	Front tread centers, in.		50 (1270 mm)

	Height, in.		43.6 (1108 mm)

	Width, in.		60 (1525 mm)

	Length, in.		---

		Without Bumper	105.9 (2689 mm)

		With Bumper	108.4 (2754 mm)

	Ground clearance		---

		Under foot platform	9.8 (250 mm)

		Under transaxle	6.7 (170 mm)

	Payload capacity, lb.		1400 (635 kg)

	Rear Tread Centers, in.		48 (1220 mm)

	Towing capacity, lb.		1400 (635 kg)

	Turning clearance circle, ft.-in.		---

	Wheelbase, in.		79 (2006 mm) front to rear, 26.8 (680 mm) mid to rear

Cargo Box

	Material		Polypropylene side panels and tailgate; steel floor and load guard

	Electric lift		Optional

	Capacity, lb.		1000 (454 kg)

	Depth, in.		12 (304.8 mm)

	Length, in.		45 (1143 mm)

	Volume, cu. ft.		16.4 (0.46 cu. m)

	Width, in.		52 (1320 mm) inside

	Height above ground, in.		25 (635 mm)

	Tailgate		Hinged at bottom, removable; side panels are removable

Fuel System

	Capacity, U.S. gal.		5 (18.9 L)

	Fuel consumption (approx.) at half load and average speed, U.S. gal.		0.35 U.S. gph (1.3 L/h)

	Fuel pump type		Pulse

Suspension and Steering

	Front		Independent spring over shock, single A-arm

		Total travel	5 in. (127 mm)

	Rear		Two high-floatation, low pressure tires (solid axles)

		Total travel	N/A

	Steering		Rack and pinion

	Turning radius, ft. (m)		12.3 (3.75)

TH 6x4 Diesel

Engine and Electrical

	Type		4 cycle diesel

	Ignition		IDI diesel

	Cylinders		3

	Cooling		Liquid

	Valving		Overhead valves

	Horsepower*		20.8 (15.5 kw)*

	Displacement		854 cc

	Lubrication		Full pressure lube

	Oil filter		Screw-on filter

	RPM, idle (no load)		1050 +/- 50

	RPM, fast (no load)		3650 +/- 50

	Air cleaner		Dry replaceable single element w/intake

	Maximum torque		34.6 lb-ft

	Battery		340 cca

	Headlights		Two 37.5 watt halogens

	Muffler		Spark arresting (optional)

	Alternator		40 amp regulated

	Steering		---

Brakes

	Type		Wet disk in transaxle

	Park brake		Wet disk, hand operated

Tires

	Front		Two 22.5x10.00-8, 2 PR hi-flotation

	Rear		Four 25x12.00-9, 2 PR hi-flotation

	Available tread types		Knobby, HDAP, Run Flat, Turf

Weight, lb.

	Dry		---

	Including Fuel/Fluids		1389 (630 kg)

Dimensions

	Seating capacity		2

	Seat type		Professional high back

	Seat adjustment		Optional, driver's side

	Front tread centers, in.		50 (1270 mm)

	Height, in.		43.6 (1108 mm)

	Width, in.		60 (1525 mm)

	Length, in.		108 (2743 mm)

		Without Bumper	105.9 (2689 mm)

		With Bumper	108.4 (2754 mm)

	Ground clearance		---

		Under foot platform	8.5 (216 mm)

		Under transaxle	6.5 (165 mm)

	Payload capacity, lb.		1600 (726 kg)

	Rear Tread Centers, in.		48 (1220 mm)

	Towing capacity, lb.		1600 (726 kg)

	Turning clearance circle, ft.-in.		---

	Wheelbase, in.		79 (2006 mm) front to rear, 26.8 (680 mm) mid to rear

Cargo Box

	Material		Polypropylene side panels and tailgate; steel floor and load guard

	Electric lift		Optional

	Capacity, lb.		1200 (544 kg)

	Depth, in.		12 (304.8 mm)

	Length, in.		45 (1143 mm)

	Volume, cu. ft.		16.4 (0.46 cu m)

	Width, in.		52 (1320 mm)

	Height above ground, in.		25 (635 mm)

	Tailgate		Hinged at bottom, removable; side panels are removable

Fuel System

	Capacity, U.S. gal.		5 (1.89 L)

	Fuel consumption (approx.) at half load and average speed, U.S. gal.		0.25 gal/hr (.95 L/hr)

	Fuel pump type		Pulse

Suspension and Steering

	Front		Independent spring over shock, single A-arm

		Total travel	5 in. (127 mm)

	Rear		Two high-floatation, low pressure tires (solid axles)

		Total travel	N/A

	Steering		Rack and pinion

	Turning radius, ft. (m)		12.4 (3.8)

TE 4x2 Electric

Drive System

	Motor		Wound direct drive

	Controller		Separately excited, 400 amp max., Anti-roll away braking and alarm. Antistall motor protection. Regenerative braking. Diagnostic indicator. Full torque, reduced speed reverse.

	Transaxle		16.99:1 ratio with helical gearing

	Electrical System		48 volt w/8 Trojan T-105 batteries

	Speed - mph (km/h)		0-15 (24.1)

	Gear Selection		Forward, Neutral, Reverse

	Torque Converter		N/A

	Battery		Trojan T-105

	Extended Run Time Battery		Trojan T-145

Brakes

	Type		Dual rear wheel mechanical drum, auto adjust

	Park Brake		Hand operated, multi-latch

Tires

	Front		22.5x10.00-8, 4-ply hi-flotation turf

	Rear		25x12.00-9, 4-ply hi-flotation turf

Suspension and Steering

	Front		Independent, spring over shock, single A-Arm

		Total Travel	5 in. (127 mm)

	Rear		2 hi-flotation, low pressure tires

		Total Travel	N/A

	Steering		Rack and pinion

Dimensions

	Height - in. (mm)		44.5 (1130)

	Width - in. (mm)		60 (1524)

	Length - in. (mm)		---

		Without Bumper	104.9 (2664)

		With Bumper	107.4 (2728)

	Ground Clearance - in. (mm)		---

		Under Transaxle	---

		Under Foot Platform	7.3 (185)

	Front Tread Centers		50 (1270)

	Rear Tread Centers		48 (1219)

	Wheelbase		69.7 (1770)

	Vehicle Weight - lb. (kg)		1302 (627) w/batteries

	Turning Clearance Circle - ft. (m)		24.1 (7.3)

	Payload Capacity - lb. (kg)		900 (409)

	Towing Capacity - lb (kg)		600 (273)

Gator CX Utility Vehicles

Click model for specs

CX 4x2

Engine and Electrical

	Type		4-cycle gas

	Ignition		Magneto, solid state 12V

	Cylinders		1

	Cooling		Air

	Valving		Overhead valves

	Horsepower*		9.5 (7.1 kw)*

	Displacement		286 cc (17.45 cu. in.)

	Lubrication		Full pressure

	Oil filter		Optional

	RPM, idle (no load)		1150

	RPM, fast (no load)		3850

	Air cleaner		Single-element paper, replaceable

	Maximum torque		14.5 lb.-ft @ 2500 rpm

	Battery		U1, 160 CCA

	Headlights		Two at 25 watts, 12-volt DC

	Muffler		Optional spark arrester

	Alternator		15 amp, regulated

	Steering		---

Brakes

	Type		Wet disk in transaxle

	Park brake		Wet disk, hand/foot operated

Tires

	Front		18x8.5-8, 4 PR Turf, 18x9.5-8 3 PR Knobby

	Rear		20x10-8, 2 PR Turf, 20x11-8 3 PR Knobby

	Available tread types		Turf, Knobby

Weight, lb.

	Dry		---

	Including Fuel/Fluids		687 lbs (312 kg)

Dimensions

	Seating capacity		2

	Seat type		Professional high back bucket seats, tilt forward

	Seat adjustment		Slide rail system - 14 positions, 1/2-in. increments

	Front tread centers, in.		38.6 (980 mm)

	Height, in.		44 (1118 mm)

	Width, in.		Rear: 49.0 (1245 mm), Front: 47.2 (1199 mm)

	Length, in.		---

		Without Bumper	95.7 (2431 mm)

		With Bumper	98.2 (2494 mm)

	Ground clearance		---

		Under foot platform	4.8 (122 mm)

		Under transaxle	7.0 (178 mm)

	Payload capacity, lb.		800 (363 kg)

	Rear Tread Centers, in.		39.8 (1011 mm)

	Towing capacity, lb.		600 (272 kg)

	Turning clearance circle, ft.-in.		---

	Wheelbase, in.		65.5 (1663 mm)

Cargo Box

	Material		High-density cross-linked polyethylene

	Electric lift		Optional

	Capacity, lb.		400 (181 kg)

	Depth, in.		7.8 (198 mm)

	Length, in.		28.9 (734 mm)

	Volume, cu. ft.		5.0 (.14 cu. m)

	Width, in.		38.2 (970 mm)

	Height above ground, in.		25 (635 mm)

	Tailgate		Hinged at bottom, removable

Fuel System

	Capacity, U.S. gal.		3.0 (11.4 L)

	Fuel consumption (approx.) at half load and average speed, U.S. gal.		0.4 gal/hr (1.5 L/hr)

	Fuel pump type		Pulse

Suspension and Steering

	Front		Independent, single A-arm suspension

		Total travel	3.25 in. (82 mm)

	Rear		Triple-rate spring-over-shock

		Total travel	3.5 in. (89 mm)

	Steering		Rack and pinion

	Turning radius, ft. (m)		9.875 (3.0)

Attachments for Gator Utility Vehicles

Click model for specs

Gator Compact Series

Attachment Packages
- Property Care Package: Front Bumper, Cargo Box Power Lift Kit, Rear Hitch
- Transporter Package: Sun Canopy, Floormat, Brake-Tail Light Kit
Ease & Comfort
- Back-up Alarm
- Brake/Tail Light Kit
- Cargo Box Power Lift Kit
- Deluxe Light Kit
- Floor Mat
- Hinged Windshield
- Horn Kit
- Manual Lift Assist
- Poly Cart Hard Top
- Sun Canopy
- Vehicle Cover
- Windscreen
Hitch & Haul
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 25 Gallon Bed Sprayer
- 40 Gallon Sprayer
- 40 Gallon Tow Behind Sprayer
- Box Side Extensions
- Cargo Box Mat
- Front Receiver Hitch
- Hitch Drawbar Kit
- Tire Chains
Performance, Outdoors & Hunting
- Back-up Alarm
- Brake/Tail Light Kit
- Cargo Box Mat
- Deluxe Light Kit
- Front Bumper
- Front Fender Brush Guard
- Heavy-duty Front Suspension Kit
- High-Capacity Alternator Kit
- Horn Kit
- Poly Cart Hard Top
- Rear Hitch
- Rear Receiver Hitch
- Tire Chains
- Windscreen
Push & Pull
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 54-inch Front Blade
- 72-inch Front Blade
- Box Side Extensions
- Front Receiver Hitch
- Hitch Drawbar Kit
- Plot Markers
- Rear Hitch
- Rear Receiver Hitch
- Rear Wheel Weights
- Tire Chains

Gator HPX Series

Attachment Packages
- Deluxe Outdoorsman Package: OPS Poly Roof, Poly Full Windshield Kit OPS, Adventure Light Kit, OPS Seat Belt Comfort Strap
- Deluxe Property Care Package: Heavy-Duty Brush Guard, Cargo Box Power Lift Kit, Bedliner, Flooormats
- Deluxe Worksite Package: Back-up Alarm, Deluxe Light Kit, Heavy-Duty Fender Guards, Horn Kit
Ease & Comfort
- Back-up Alarm
- Beacon Light
- Bedliner
- Brake/Tail Light Kit
- Camo Seat Cover (Large)
- Cargo Box Power Lift Kit
- Deluxe Cab Structure
- Deluxe Light Kit
- Deluxe Seat Cover (Large)
- Electrical Kit
- Exterior Mirrors
- Floor Mat
- Front Work Lights
- Full-Size Vehicle Cover
- Gator Gear Organizer
- Glass Doors
- Heater
- Heater Fitting Kit
- Horn Kit
- Interior Light
- OPS Camo Organizer
- OPS Camo Soft Roof
- OPS Light Kit
- OPS Organizer
- OPS Rear Panel and Doors Kit
- OPS Rearview Mirror
- OPS Soft Roof Kit
- OPS and Deluxe Cab Camo Cover
- Poly Cart Hard Top
- Poly Half Windshield Kit, OPS
- Poly Roof Kit, OPS
- Poly Windshield Kit, OPS
- Rear Screen Kit, OPS
- Rear Work Light
- Soft Side Tool Box
- Tool Box
- Tubular Structure, OPS
- Visor
- Winch Accessory Kit
- Windscreen
- Windshield
- Windshield Waasher
Hitch & Haul
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 21 Utility Cart
- 25 Gallon Bed Sprayer
- 40 Gallon Sprayer
- 40 Gallon Tow Behind Sprayer
- Cargo Box Mat
- Cargo Box Side Extension Kit
- Front Receiver Hitch
- Hitch Drawbar Kit
- Soft Side Tool Box
- Tire Chains
- Tool Box
Performance, Outdoors & Hunting
- Adventure Light Kit
- Back-up Alarm
- Beacon Light
- Brake/Tail Light Kit
- CV Guards, Front
- Camo Seat Cover (Large)
- Cargo Box Mat
- Clutch Enclosure
- Deluxe Cab Structure
- Deluxe Light Kit
- Engine Coolant Heater
- Exterior Mirrors
- Front Fender Brush Guard
- Gator Gear Organizer
- Gun Boot IV
- Gun Boot IV Mounting Bracket
- Heavy-duty Brush Guard
- Heavy-duty Fender Guards
- Heavy-duty Front Suspension Kit
- High-Capacity Alternator Kit
- Horn Kit
- Interior Light
- OPS Camo Organizer
- OPS Camo Soft Roof
- OPS Light Kit
- OPS Organizer
- OPS Rearview Mirror
- OPS Soft Roof Kit
- OPS and Deluxe Cab Camo Cover
- Poly Cart Hard Top
- Poly Full Windshield Kit, OPS
- Poly Half Windshield Kit, OPS
- Poly Roof Kit, OPS
- Rear Receiver Hitch
- Rear Screen Kit, OPS
- Rear Work Light
- Soft Side Tool Box
- Tire Chains
- Tool Box
- Winch
- Winch Accessory Kit
- Windscreen
- Windshield
Push & Pull
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 21 Utility Cart
- 72-inch Front Blade
- 72-inch V-Blade
- Front Receiver Hitch
- Heavy-Duty 72-in. Blade with POWERtach
- Hitch Drawbar Kit
- Plow Markers
- Powertach Markers
- Rear Receiver Hitch
- Standard-Duty 72-in. Front Blade
- Standard-Duty 72-in. V-Blade
- Tire Chains
- Winch
- Winch Accessory Kit

Gator Traditional Series

Attachment Packages
- Traditional Series Outdoorsman Package: Brake/Taillight Kit, Gauge Kit, Windscreen
- Traditional Series Safeguard Package: Front Bumper, Front Brush Guard, Rubber Floot Mat
- Traditional Series Worksite Package: Back-up Alarm, Deluxe Light Kit, Fender Guards
Ease & Comfort
- Adjustable Driver's Seat Kit
- Back-up Alarm
- Beacon Light
- Bedliner
- Brake/Tail Light Kit
- Cab, Glass Doors
- Camo Seat Cover (Large)
- Cargo Box Power Lift Kit
- Deluxe Light Kit
- Deluxe Seat Cover (Large)
- Electrical Kit
- Exterior Mirrors
- Floor Mat
- Forced-Air Heater
- Front Work Lights
- Full-Size Vehicle Cover
- Gator Gear Organizer
- Gauge Package
- Heater
- Horn Kit
- Interior Light
- OPS and Deluxe Cab Camo Cover
- Poly Cart Hard Top
- Rear Work Light
- Soft Side Tool Box
- Tool Box
- Vehicle Cover
- Visor
- Winch Accessory Kit
- Windscreen
- Windshield Washer
- Windshield Wiper
Hitch & Haul
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 21 Utility Cart
- 25 Gallon Bed Sprayer
- 40 Gallon Sprayer
- 40 Gallon Tow Behind Sprayer
- Cargo Box Mat
- Cargo Box Side Extension Kit
- Front Receiver Hitch
- Hitch Drawbar Kit
- Rough Terrain Kit
- Soft Side Tool Box
- Tire Chains
- Tool Box
Performance, Outdoors & Hunting
- Back-up Alarm
- Beacon Light
- Brake/Tail Light Kit
- Camo Seat Cover (Large)
- Cargo Box Mat
- Deluxe Light Kit
- Drive Belt Splash Guard
- Engine Coolant Heater
- Exterior Mirrors
- Front Bumper
- Front Fender Brush Guard
- Gator Gear Organizer
- Gauge Package
- Gun Boot IV
- Gun Boot IV Mounting Bracket
- Heavy-duty Front Suspension Kit
- High-Capacity Alternator Kit
- Horn Kit
- Interior Light
- OPS and Deluxe Cab Camo Cover
- Poly Cart Hard Top
- Rear Hitch
- Rear Receiver Hitch
- Rear Screen Kit, OPS
- Rear Work Light
- Recoil Start Kit
- Rough Terrain Kit
- Soft Side Tool Box
- Tire Chains
- Tool Box
- Winch
- Winch Accessory Kit
- Windscreen
Push & Pull
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 21 Utility Cart
- 54-inch Front Blade
- 72-inch Front Blade
- 72-inch V-Blade
- Front Receiver Hitch
- Hitch Drawbar Kit
- Plow Markers
- Rear Hitch
- Rear Reciever Hitch
- Rough Terrain Kit
- Standard-Duty 72-in. Front Blade
- Standard-Duty 72-in. V-Blade
- Tire Chains
- Winch
- Winch Accessory Kit

XUV Series

Attachment Packages
- Deluxe Body Armor Package: Front CV Guards, Rear CV Guards, Heavy-Duty Skid Plate
- Deluxe Outdoorsman Package: OPS Poly Roof, Poly Full Windshield Kit OPS, Adventure Light Kit, OPS Seat Belt Comfort Strap
- Deluxe Property Care Package: Heavy-Duty Brush Guard, Cargo Box Power Lift Kit, Bedliner, Flooormats
- Deluxe Worksite Package: Back-up Alarm, Deluxe Light Kit, Heavy-Duty Fender Guards, Horn Kit
Ease & Comfort
- Back-up Alarm
- Beacon Light
- Bedliner
- Brake/Tail Light Kit
- Camo Seat Cover (Large)
- Cargo Box Power Lift Kit
- Deluxe Cab Structure
- Deluxe Light Kit
- Deluxe Seat Cover (Large)
- Electrical Kit
- Exterior Mirrors
- Floor Mat
- Front Work Lights
- Full-Size Vehicle Cover
- Gator Gear Organizer
- Glass Doors
- Heater
- Heater Fitting Kit
- Horn Kit
- Interior Light
- OPS Camo Organizer
- OPS Camo Soft Roof
- OPS Light Kit
- OPS Organizer
- OPS Rear Panel and Doors Kit
- OPS Rearview Mirror
- OPS Soft Roof Kit
- OPS and Deluxe Cab Camo Cover
- Poly Cart Hard Top
- Poly Half Windshield Kit, OPS
- Poly Roof Kit, OPS
- Poly Windshield Kit, OPS
- Rear Screen Kit, OPS
- Rear Work Light
- Soft Side Tool Box
- Tool Box
- Tubular Structure, OPS
- Visor
- Winch Accessory Kit
- Windshield Washer
Hitch & Haul
- 1-7/8-inch Ball Hitch
- 2-inch Ball Hitch
- 2-inch Drawbar Kit
- 2-inch Front Receiver Hitch
- 10AT Utility Cart
- 17AT Utility Cart
- 21 Utility Cart
- 25 Gallon Bed Sprayer
- 40 Gallon Sprayer
- 40 Gallon Tow Behind Sprayer
- Cargo Box Mat
- Cargo Box Side Extension Kit
- Soft Side Tool Box
- Tire Chains
- Tool Box
Performance, Outdoors & Hunting
- 2-inch Multi-Mount Winch
- Adventure Light Kit
- Alloy Wheels: Clear Coat (Silver)
- Back-up Alarm
- Beacon Light
- Brake/Tail Light Kit
- CV Guards, Front
- CV Guards, Rear
- Camo Seat Cover (Large)
- Cargo Box Mat
- Deluxe Cab Structure
- Deluxe Light Kit
- Engine Coolant Heater
- Exterior Mirrors
- Front Fender Brush Guard
- Gator Gear Organizer
- Gun Boot IV
- Gun Boot IV Mounting Bracket
- Heavy-duty Brush Guard
- Heavy-duty Fender Guards
- Heavy-duty Skid Plate
- Heavy-duty Front Suspension Kit
- High-Capacity Alternator Kit
- High-Performance Slip-On Exhaust
- Horn Kit
- Interior Light
- OPS Camo Organizer
- OPS Camo Soft Roof
- OPS Light Kit
- OPS Organizer
- OPS Rearview Mirror
- OPS Soft Roof Kit
- OPS and Deluxe Cab Camo Cover
- Poly Cart Hard Top
- Poly Full Windshield Kit, OPS
- Poly Half Windshield Kit, OPS
- Poly Roof Kit, OPS
- Rear Receiver Hitch
- Rear Screen Kit, OPS
- Rear Work Light
- Skid Plate
- Soft Side Tool Box
- Speed Limiter
- Tire Chains
- Tool Box
- Winch Accessory Kit
- Yellow Alloy Wheels
Push & Pull
- 1-7/8-inch Ball Hitch
- 2-inch Drawbar Kit
- 2-inch Front Receiver Hitch
- 2-inch Ball Hitch
- 2-inch Multi-Mount Winch
- 10AT Utility Cart
- 17AT Utility Cart
- 21 Utility Cart
- 72-inch Front Blade
- 72-inch V-Blade
- Heavy-Duty 72-in. Blade with POWERtach
- Plow Markers
- Powertach Markers
- Rear Receiver Hitch
- Standard-Duty 72-in. Front Blade
- Standard-Duty 72-in. V-Blade
- Tire Chains
- Winch Accessory Kit

Steel-Deck 22-Inch Walk-Behind Mowers

Click model for specs

JS26

Engine

	Manufacturer		Briggs & Stratton

	Power		7.0 lb-ft gross torque per SAE J1940

	Displacement		11.6 cu in. (190 cc)

	Type		4 cycle, side valve

	Throttle control		Fixed speed

	Electric start		No

	Operator presence		Yes

		Zone	Yes

		BBC	N/A

Mower

	Deck		22-in. steel

	Discharge		3-in-1

	Side Discharge		Standard

	Bag		Standard, 2 1/2 bu

	Mulch		Standard

	Transmission		Variable speed, front wheel drive

	Wheels		8x2 front, 9x2 rear

	Wheel adjusters		3-point adjusting system

	U.S. Warranty		2 year

JS36

Engine

	Manufacturer		Briggs & Stratton

	Power		7.0 lb-ft gross torque per SAE J1940

	Displacement		11.6 cu in. (190 cc)

	Type		4 cycle, side valve

	Throttle control		Fixed speed

	Electric start		No

	Operator presence		Yes

		Zone	Yes

		BBC	N/A

Mower

	Deck		22-in. steel

	Discharge		3-in-1

	Side Discharge		Standard

	Bag		Standard, 2 1/2 bu

	Mulch		Standard

	Transmission		Variable speed, rear wheel drive

	Wheels		8x2 front, 9x2 rear

	Wheel adjusters		One lever adjusts all four wheels

	U.S. Warranty		2 year

JS46

Engine

	Manufacturer		Briggs & Stratton

	Power		8.75 lb-ft gross torque per SAE J1940

	Displacement		11.6 cu in. (190 cc)

	Type		4 cycle, OHV

	Throttle control		Fixed speed

	Electric start		Yes, with recoil start backup

	Operator presence		Yes

		Zone	Yes

		BBC	N/A

Mower

	Deck		22-in. steel

	Discharge		3-in-1

	Side Discharge		Standard

	Bag		Standard, 2 1/2 bu

	Mulch		Standard

	Transmission		Variable speed, rear wheel drive

	Wheels		8x2 front, 9x2 rear

	Wheel adjusters		One lever adjusts all four wheels

	U.S. Warranty		2 year

Home & Workshop

Click model for specs

Air Compressors

Gasoline
- AC1-5GH (5 gallon, 118cc, Honda OHV)
- AC1-5GS (5 gallon, 4.5 HP, 126cc Subaru)
- AC1-8GS (8 gallon, 6 HP, 211cc Subaru)
- AC1-8GH (8 gallon, 6.5 HP, 196cc Honda)
- AC2-8GH (8 gallon, 8 HP, 270cc Honda)
- AC2-8GS (8 gallon, 9 HP, 265cc Subaru)
- AC1-20GS (20 gallon, 6 HP, 211cc Subaru)
- AC1-20GH (20 gallon, 6.5 HP, 196cc Honda)
- AC2-20GH (20 gallon, 8 HP, 270cc Honda)
- AC2-20GS (20 gallon, 9 HP, 265cc Subaru)
- AC2-20GHS (20 gallon, 8 HP, 270cc Honda)
- AC2-20GSS (20 gallon, 9 HP, 265cc Subaru)
Electric
- HR1-5E (5 gallon, 2 HP, Electric)
- HR1-20E (20 gallon upright, 2.0 HP, Electric)
- AC2-80ES (80 gallon, 5.0 HP, Electric)
Premium
- PR1-8GM (208cc)
- PR2-8GM (291cc)

Air Tools

Air Hammers
- Air Hammer Kit
- Long Barrel Air Hammer Kit
Grinders/Cut-Off Tools
- 1/4-in. Die Grinder Kit
- 4-in. Angle Grinder
- 1/4-in. Angle Die Grinder
- Cut-Off Tool
- Reciprocating Saw/File Kit
- AT-3403-JK Cut-off Tool Kit
Heavy-Duty Impact Wrenches
- 1/2-in. Heavy-Duty Impact
- 3/8-in. Butterfly Impact
- 3/4-in. High-Torque Impact
- 3/8-in. Angle-Head Impact
- 1/2-in. Pistol Impact
- 1-in. Straight Impact
Power Ratchet Wrenches
- 1/4-in. Power Ratchet
- 3/8-in. Power Ratchet
- 1/2-in. Power Ratchet
Reversible Drills
- 3/8-in. Reversible Drill
- 1/2-in. Reversible Drill
Miscellaneous Air Tools
- Paint Gun and Cup
- Heavy-Duty Air Nibbler
- Air Gasket Scraper

Battery Chargers

- Battery Charger/Engine Starter with Voltmeter and Timer
- Manual Battery Charger with Engine Start and Timer
- Automatic Battery Charger with Engine Start
- Speed-Smart Battery Charger with Engine Start
- Fully Automatic 1.5-Amp Battery Charger and Maintainer
- Onboard Automatic 1.5-Amp Battery Charger and Maintainer

Compresserators

Portable
- 1600 watts, 11.6 CFM, 6.5 HP, 196cc Honda
- 3500 watts, 15.7 CFM, 13 HP, 389cc Honda
Stationary
- 3500 watts, 15.7 CFM, 13 HP, 389cc Honda
- 3500 watts, 15.7 CFM, 13 HP, 389cc Honda
- 4000 watts, 15.7 CFM, 14 HP, 404cc Subaru

Corn and Wood Pellet Stoves

Corn
- HR-CS002 (Black Door)
- HR-CS002 (Gold Door)
- HR-CS002 (Silver Door)
Wood Pellet
- HR-WPS02 (Black Door)
- HR-WPS02 (Gold Door)
- HR-WPS02 (Silver Door)

Flashlights

- 30 LED PORTABLE WORK LIGHT
- Flashlight, Twin-Task 3C LED Flashlight, Black Body without batteries
- Flashlight, Twin-Task 2 Cell Lithium Flashlight, Black Body with batteries
- Personal LED Flashlight 2AA, includes batteries
- Flashlight, Deere 3C LED Flashlight, Yellow Body, without batteries
- Deere Mechanics REACH Penlight, with batteries
- Flashlight, Deere Mechanics Penlight, Black Body, with batteries
- Personal LED Flashlight 3AAA, includes batteries
- Flashlight, Deere 4AA LED Flashlight, Yellow Body, with batteries
- 6-LED Twin-pack Flashlight Set
- 12-LED Compact Flashlight
- 9-LED flashlight, Black
- 9-LED flashlight, Pink

Gas Barbecue Grills

LP Gas Grills
- 50,000 BTU Gas Grill
- 52,000 BTU Gas Grill
- 77,000 BTU Gas Grill
Natural Gas Grills
- 52,000 BTU Natural Gas Grill
- 77,000 BTU Natural Gas Grill

Generators

Agricultural/Commercial
- AC-G3200i (3200 watts, 211cc Subaru)
- AC-G4300i (4300 watts, 265cc Subaru)
- AC-G3010H (3000 watts. 5.5 HP, 163cc Honda)
- AC-G4010S (4000 watts, 211cc Subaru)
- AC-G4010H (4000 watt, 242cc Honda)
- AC-G5010S (5000 watt, 265cc Subaru)
- AC-G6010H (6000 watt, 389cc Honda)
- AC-G6010H (6000 watt, 389cc Honda, electric start)
- AC-G6010S (6000 watts, 404cc Subaru)
- AC-G6010S-E (6000 watts, 404cc Subaru, electric start)
- AC-G7510H (7500 watts, 389cc Honda)
- AC-G7510H-E (7500 watt, 389cc Honda, electric start)
- AC-G8010S (8000 watts, 404cc Subaru)
- AC-G8010S-E (8000 watts, 404cc Subaru, electric start)
- AC-G12010H (12,000 watts, 614cc Honda, electric start)
- AC-G13010S (13,000 watts, 653cc Subaru, electric start)
- AC-G6000DY (6000 watts, 9.2 hp Yanmar, diesel, electric start)
- PR-G3200M (3200 watts, 208cc Mi-T-M)
- PR-G5500M (5500 watts, 291cc Mi-T-M)
- PR-G7500M (7500 watts, 414cc Mi-T-M)
Homeowner/Residential
- Inverter, 1650 watts, 2.8 HP, 86cc Subaru

Grease Guns and Accessories

- 14.4V battery powered grease gun
- 12V battery powered grease gun
- Heavy-duty silver grease guns - Pistol-grip gun
- Heavy-duty silver grease guns - Lever action gun
- John Deere green grease guns - Pistol-grip gun
- John Deere green grease guns - Lever action gun
- Air-operated, continuous-flow grease gun
- Mini-grease gun with two 3-oz. grease cartridges
- Universal Grease Gun Bracket
- 7-Piece Quick Connector Grease Fit
- Professional Grease Joint Cleaner Ki
- Pocket Grease Joint Cleaner Tool

Hand Tools

Pliers and Plier Sets
- Alligator™ High-Performance Pliers
- Cobra® Pliers
- Knipex® Pliers-Wrenches
- Fence Pliers
- High-Leverage Combination Pliers
- Long-Nose Pliers
- Long-Reach Pliers Set
- Retaining Ring Pliers
- Rib Joint Pliers, Heavy-Duty
- Combination Slip Joint Pliers
- Slip Joint Pliers
- Rib Joint Pliers
- Snap Ring Pliers
Screwdrivers
- Screwdriver set, professional – 5-pc. set
- Screwdriver set – 8-pc. set
- 8-in. long (3/8-in.) flat tip
- 6-in. long Phillips No. 3
- Double-edge 5-piece screw extractor set
- Double-edge screw extractor, size 6
- Double-edge screw extractor, size 7
Socket Sets, Ratchets, and Accessories
- Pear-Head Ratchets
- Pear-Head Socket Sets
- 3/8-in. Drive Crow Foot Flare Nut Wrench Sets
- 8/8-in. Drive Flex Socket Sets
- Clip Rails
- Universal Joints
- Wobble Extension Sets for Drive Ratchets
Tool Sets
- Tool set – 70-pc., 1/4-in.- and 3/8-in.-drive (SAE and metric), socket and wrench
- Tool set – 72-pc., 1/4-in. and 3/8-in. drive (SAE and metric), socket and wrench
Wrenches and Wrench Sets
- Adjustable Wrenches
- Combination Wrench Sets, Full-Polished
- Combination Wrench Sets, Satin Finish
- Combination Ratcheting Wrench Sets

Power Tools

Belt Sanders
- 3-in. x 21-in. Belt Sander
Disc Grinders
- 4 1/2-in. Disc Grinder
- 7-in. Disc Grinder
Drills
- 12-volt, 1/2-in. Cordless Driver
- 14.4-volt, 1/2-in. Cordless Driver
- 18-volt, 1/2-in. Cordless Driver
- 1/2-in. Reversible
- 3/8-in. High-Speed Reversible
- 1/2-in. Variable-Speed, Reversible Hammer
Flashlights
- 9.6-12.0-volt Flashlight
- 14.4-18.0-volt Flashlight
- 12V Cordless Lantern
- 14.4V & 18V Cordless Lantern
Impact Wrenches
- 12-volt, 1/2-in. Cordless Impact
- 12-volt, 3/8-in. Cordless Impact
- 18-volt, 1/2-in. Cordless Impact
- 1/2-in. Impact Wrench, Square Drive
Metal Cutting Saw
- 7-in. Metal Cutting Saw
Saws
- 4 1/2 in. Jigsaw
- 18-volt Cordless, 6 1/2-in. Circular Saw
John Deere Radio
- John Deere Radio, AM/FM with auxiliary port

Pressure Washers

Homeowner/Residential Series - Cold Water
- Light Duty (1250 PSI, 1.5 HP)
- Light Duty (2400 PSI, 5.5 HP, 160cc)
- Light Duty (2500 PSI, 5.0 HP, 160cc)
- Light Duty (2700 PSI, 6.0 HP, 187cc)
- Light Duty (3000 PSI, 196cc)
- Light Duty (3800 PSI, 389cc)
Premium Series - Cold Water
- Medium Duty (3000 PSI, 6.5 HP, 196cc)
- Medium Duty (3000 PSI, 7.0 HP, 211cc)
- Medium Duty (3400 PSI, 9.0 HP, 270cc)
- Medium Duty (3400 PSI, 9.0 HP, 265cc)
- Medium Duty (4000 PSI, 13.0 HP, 389cc)
- Medium Duty (4000 PSI, 13.5 HP, 404cc)
Agricultural/Commercial Series - Cold Water
- Heavy Duty (1500 PSI, 2.0 HP)
- Heavy Duty (1500 PSI, 2.0 HP, Ct Mnt)
- Heavy Duty (2500 PSI, 6.0 HP)
- Heavy Duty (2700 PSI, 6.5 HP, 196cc)
- Heavy Duty (2700 PSI, 7.0 HP, 211cc)
- Heavy Duty (3300 PSI, 13.0 HP, 389cc)
- Heavy Duty (3300 PSI, 13.0 HP, 389cc)
- Heavy Duty (2500 PSI, 13.0 HP, 389cc)
- Heavy Duty (3500 PSI, 13.0 HP, 389cc)
Agricultural/Commercial Series - Hot Water
- Oil Fired Direct Drive, 1500 PSI, 2.0 HP
- Oil Fired Direct Drive, 2000 PSI, 4.0 HP
- Oil Fired Belt Drive, 3000 PSI, 8.0 HP
- Oil Fired Belt Drive, 3000 PSI, 8.0 HP, three phase
- Direct Drive (3500 PSI, 389cc)
- Direct Drive (3500 PSI, 404cc)
GatorPal™
- GatorPal™, 2700 PSI, 6.5 HP, Honda
- GatorPal™, 2700 PSI, 7.0 HP, Subaru
- GatorPal™, 3000 PSI, 9.0 HP, Honda
- GatorPal™, 3000 PSI, 9.0 HP, Subaru

Security Safes

12 Cubic Foot Safe

17 Cubic Foot Safe

20 Cubic Foot Safe

23 Cubic Foot Safe
- 23 Cu. Ft. Safe, Moline, Green
- 23 Cu. Ft. Safe, Moline, Burgundy
- 23 Cu. Ft. Safe, Textured Black
- 23 Cu. Ft. Safe, White Marble
- 23 Cu. Ft. Safe, Green Marble
- 23 Cu. Ft. Safe, Textured Granite
25 Cubic Foot Safe

32 Cubic Foot Safe

35 Cubic Foot Safe
- 35 Cu. Ft., Green
- 35 Cu. Ft., Burgandy
- 35 Cu. Ft., Green Marble
- 35 Cu. Ft., Burgandy Marble
- 35 Cu. Ft., Gray Marble
- 35 Cu. Ft., Textured Black
- 35 Cu. Ft., Champagne
40 Cubic Foot Safe

50 Cubic Foot Safe
- 50 Cu. Ft. Safe, Moline, Green
- 50 Cu. Ft. Safe, Moline, Gray Marble

Space Heaters

Kerosene Fired
- 70,000 BTU/per hr., 1/8 HP
- 125,000 BTU/per hr., 1/5 HP
- 175,000 BTU/per hr., 1/4 HP
- 215,000 BTU/per hr., 1/3 HP

Tool Storage

Gator® Tool Box

Job Site Tool Boxes
- Toolbox (36 x 19 x 16 in.)
- Toolbox (48 x 22 x 22 in.)
- Toolbox (48 x 30 x 30 in.)
- Toolbox (60 x 24 x 26 in.)
Tool Chests & Cabinets
- 26-in., 6-Drawer Ball Bearing Chest
- 26-in., 4-Drawer Ball Bearing Cabinet
- 26-in., 6-Drawer Stainless Steel Tool Chest
- 26-in., 8-Drawer Stainless Steel Tool Cabinet
- 41-in., 8-Drawer Stainless Steel Tool Chest
- 41-in., 12-Drawer Stainless Steel Tool Cabinet
- 41-in., 8-Drawer Chest and 11-Drawer Cabinet
- 41-in.-wide, 11-Drawer Ball Bearing Chest
- 41-in.-wide, 12-Drawer Ball Bearing Cabinet
- Heavy-Duty Side Cabinet
- 46-in.-wide, 10-Drawer Ball Bearing Chest
- 46-in.-wide, 12-Drawer Ball Bearing Cabinet
- 56-in. Professional Tool Cabinet
- 56-in. Professional Top Hutch
- Professional Side Locker
Portable & Road Tool Boxes
- GTO Toolbox
- 3-Drawer Portable Chest
- 20-in.-wide, 3-Drawer Portable Toolbox
- 26-in.-wide, 6-Drawer Drop-Front Portable Tool Chest
- 36-in.-wide, 6-Drawer Extra-Heavy-Duty Road Box
- 26-in.-wide, 10-Drawer Tool Chest
- 20-in.-wide, Combine Toolbox
- 20-in.-wide, Vintage Tractor Toolbox
Truck Boxes
- Single-Lid Crossover Toolbox
- Dual-Lid Crossover Toolbox
- Single-Lid, Side-Mount Toolbox
- Utility Chest (46.5-in.)
- Utility Chest (56-in.)
- Liquid Transfer Tank
- PRO Single-Lid Crossover Toolbox
- PRO Single-Lid Wide Crossover Toolbox
- PRO Dual-Lid Crossover Toolbox
- PRO Utility Chest (60-in.)
Utility Carts
- Metal Utility Cart, 4 Drawer

Transfer Pumps

General Pumps
- AC-CP2GH
- AC-CP2GS
- AC-CP3GH
- AC-CP3GS
Semi-Trash
- AC-SP2GH
- AC-SP2GS
- AC-SP3GH
- AC-SP3GS
Chemical/Liquid Transfer
- PR-FP2GM
- PR-FP3GM
- PR-FP3GM-E

Wet/Dry Vacuums

- 9 Gallon
- 13 Gallon
- 18 Gallon

Workshop Supplies

- Bulk Fasteners
- Extension Cords
- Funnels and Oil Filter Wrenches
- Retractable Cord Reels
- Shop Towels
- Work Lights

Latest Listings

John Deere residential mowers, zero turn mowers, push mowers, lawn care equipment at WMNOBBE.com: your source for used tractors, combines, sprayers and riding mowers in Southern Illinois and Southeastern Missouri.

Residential Equipment