John Deere Farm Equipment, Tractors, Combines, Harvest Equipment

9030 Series Tractor

Click model for specs

9230

Engine
	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger with Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		263 (196) @1895 per SAE

	Official PTO HP (kW) @ Rated RPM		265.73 (198.15) @ 2100 per SAE

		@ Standard PTO @ Eng RPM	306.82 (228.80) @ 1895 per SAE

		Maximum @ Eng RPM	312.59 (233.10) @ 1800 per SAE

	Advertised Engine HP (kW) @ Rated Speed		337 (251) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		281.94 (210.25) @ 1800 rpm in 7th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		1004 lb-ft. (1362 Nm) @ 1350 rpm

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		-

	Maximum Torque Rise % (PTO) @ Eng RPM		38% @ 2100

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		15.58 gal./hr. & 17.06 HP hr./gal. @ 2100 rpm

	Standard PTO Speed @ Eng Speed		17.09 gal./hr. & 17.96 HP hr./gal. @ 1900 rpm

	Maximum PTO Power @ Eng RPM		17.54 gal./hr. & 17.82 HP hr./gal. @ 1800 rpm

	Maximum Engine Power @ Eng RPM		16.27 HP hr./gal. @ 1800 rpm in 7th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.71 HP hr./gal. @ 2100 rpm in 7th gear

	75% Load, Full Engine RPM (Unballasted)		14.68 HP hr./gal. @ 2170 rpm in 7th gear

	75% Load @ Reduced RPM (Unballasted)		15.18 HP hr./gal. @ 1580 rpm in 10th gear

Transmission

	Std. Transmission; Forward/Reverse		24-speed PowrSync

	Opt. Transmission; Forward/Reverse		18/6 PowerShift

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes (PST), Partial (MST)

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		1.75-in. (45 mm)

	PTO Speeds @ Engine RPM		---

	PTO Actuation		Electrohydraulic

9330

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbo with Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		320 (239) @ 1895 rpm per SAE

	Official PTO HP (kW) @ Rated RPM		332.97 (248.29) @ 2100 rpm per SAE

		@ Standard PTO @ Eng RPM	375.92 (280.32) @ 1900 rpm per SAE

		Maximum @ Eng RPM	385.04 (287.12) @ 1800 rpm per SAE

	Advertised Engine HP (kW) @ Rated Speed		388 (285) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		350.60 (261.44) @ 1800 rpm in 12th (C2 Lo) gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		1220 lb-ft. (1654 Nm) @ 1350 rpm

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		-

	Maximum Torque Rise % (PTO) @ Eng RPM		38% @ - 2100

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		20.04 gal./hr. & 16.61 HP hr./gal. @ 2100 rpm

	Standard PTO Speed @ Eng Speed		21.90 gal./hr. & 17.16 HP hr./gal. @ 1900 rpm

	Maximum PTO Power @ Eng RPM		22.38 gal./hr. & 17.21 HP hr./gal. @ 1800 rpm

	Maximum Engine Power @ Eng RPM		16.06 HP hr./gal. @ 1800 rpm in 12th (C2 Lo) gear

	Max Unballasted Drawbar Power @ Eng RPM		15.50 HP hr./gal. @ 2100 rpm in 7th (B1 Lo) gear

	75% Load, Full Engine RPM (Unballasted)		13.75 HP hr./gal. @ 2150 rpm in 7th (B1 Lo) gear

	75% Load @ Reduced RPM (Unballasted)		15.06 HP hr./gal. @ 1550 rpm in 12th (C2 Lo) gear

Transmission

	Std. Transmission; Forward/Reverse		24-speed PowrSync

	Opt. Transmission; Forward/Reverse		18/6 PowerShift

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes (PST), Partial (MST)

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		1.75-in. (44.5 mm)

	PTO Speeds @ Engine RPM		---

	PTO Actuation		Electrohydraulic

9430

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger with Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		320 (239) @ 1,895 per SAE

	Official PTO HP (kW) @ Rated RPM		337.90 (251.97) @ 2100 per SAE

		@ Standard PTO @ Eng RPM	378.62 (282.34) @ 1900 per SAE

		Maximum @ Eng RPM	383.79 (286.19) @ 1850 per SAE

	Advertised Engine HP (kW) @ Rated Speed		439 (323) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		390.05 (290.86) @ 1900 rpm in 8th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		1231 lb-ft. (1669 Nm) @ 1350 rpm

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		-

	Maximum Torque Rise % (PTO) @ Eng RPM		38% @ - 2100

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		20.17 gal./hr. & 16.75 HP hr./gal. @ 2100 rpm

	Standard PTO Speed @ Eng Speed		21.96 gal./hr. & 17.24 HP hr./gal. @ 1900 rpm

	Maximum PTO Power @ Eng RPM		22.25 gal./hr. & 17.25 HP hr./gal. @ 1850 rpm

	Maximum Engine Power @ Eng RPM		16.20 HP hr./gal. @ 1900 rpm in 8th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.62 HP hr./gal. @ 2100 rpm in 8th gear

	75% Load, Full Engine RPM (Unballasted)		14.23 HP hr./gal. @ 2150 rpm in 8th gear

	75% Load @ Reduced RPM (Unballasted)		14.95 HP hr./gal. @ 1600 rpm in 11th gear

Transmission

	Std. Transmission; Forward/Reverse		24-speed PowrSync

	Opt. Transmission; Forward/Reverse		18/6 Powershift

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes (PST), Partial (MST)

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		1.75-in. (44.5mm)

	PTO Speeds @ Engine RPM		---

	PTO Actuation		Electrohydraulic

9530

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger w/ Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		N/A

	Official PTO HP (kW) @ Rated RPM		-

		@ Standard PTO @ Eng RPM	-

		Maximum @ Eng RPM	-

	Advertised Engine HP (kW) @ Rated Speed		491 (361) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		438.18 (326.75) @ 1800 rpm in 12th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		-

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		-

	Maximum Torque Rise % (PTO) @ Eng RPM		38% @ 2100

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		-

	Standard PTO Speed @ Eng Speed		-

	Maximum PTO Power @ Eng RPM		-

	Maximum Engine Power @ Eng RPM		15.99 HP hr./gal. @ 1800 rpm in 12th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.74 HP hr./gal. @ 2100 rpm in 7th gear

	75% Load, Full Engine RPM (Unballasted)		14.42 HP hr./gal. @ 2170 rpm in 7th gear

	75% Load @ Reduced RPM (Unballasted)		15.14 HP hr./gal. @ 1580 rpm in 10th gear

Transmission

	Std. Transmission; Forward/Reverse		18/6 PowerShift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		N/A

	Optional		N/A

	PTO Speeds @ Engine RPM		N/A

	PTO Actuation		N/A

Hydraulics

	Type		Pressure & Flow Compensating Closed Center

	Pump Rated Output, GPM (L/min.)		48 (182)

		Standard	48 (182)

		Optional	78 (283)

	Rated Flow @ One SCV, GPM (L/min.)		30 (181)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20,000)

	Maximum Hydraulic Power, HP (kW)		58.3 (43.5)

	Hitch Draft Control Load Sense Type		Electronic

	Remote Control Valves Available		4 Std., 5 & 6 Optional

	Hitch Category (SAE Designation)		4/4N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		15,300 (6940)

		OECD	15,769 (7,153)

		Standard	15,300 (6940)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9630

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger w/ Air-to-Air Aftercooling and exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		N/A

	Official PTO HP (kW) @ Rated RPM		-

		@ Standard PTO @ Eng RPM	-

		Maximum @ Eng RPM	-

	Advertised Engine HP (kW) @ Rated Speed		543 (399) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		467.50 (348.61) @ 1865 rpm in 12th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		-

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		-

	Maximum Torque Rise % (PTO) @ Eng RPM		38% @ 2100

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		---

	Standard PTO Speed @ Eng Speed		---

	Maximum PTO Power @ Eng RPM		---

	Maximum Engine Power @ Eng RPM		15.00 HP hr./gal. @ 1865 rpm in 12th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.39 HP hr./gal. @ 2100 rpm in 8th gear

	75% Load, Full Engine RPM (Unballasted)		14.27 HP hr./gal. @ 2170 rpm in 8th gear

	75% Load @ Reduced RPM (Unballasted)		14.70 HP hr./gal. @ 1590 rpm in 11th gear

Transmission

	Std. Transmission; Forward/Reverse		18/6 PowerShift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		N/A

	Optional		N/A

	PTO Speeds @ Engine RPM		N/A

	PTO Actuation		N/A

Hydraulics

	Type		Pressure & Flow Compensating Closed Center

	Pump Rated Output, GPM (L/min.)		48 (182)

		Standard	48 (182)

		Optional	78 (283)

	Rated Flow @ One SCV, GPM (L/min.)		30 (181)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20,000)

	Maximum Hydraulic Power, HP (kW)		58.3 (43.5)

	Hitch Draft Control Load Sense Type		Electronic

	Remote Control Valves Available		4 Std.; 5 & 6 Optional

	Hitch Category (SAE Designation)		4/4N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		15,300 (6940)

		OECD	15,769 (7,153)

		Standard	15,300 (6940)

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9430T

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger with Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 cu in. (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		319 (1207)

		Standard	-

		Optional	---

	Underhood muffler		no

Performance

	Advertised PTO HP (kW) @ Rated RPM		320 (239) @ 1895 rpm per SAE

	Official PTO HP (kW) @ Rated RPM		320.78 (239.20) @ 2100 rpm per SAE

		@ Standard PTO @ Eng RPM	365.51 (272.56) @ 1895 rpm per SAE

		Maximum @ Eng RPM	367.82 (274.28) @ 1850 rpm per SAE

	Advertised Engine HP (kW) @ Rated Speed		439 (323) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		378.85 (282.51) @ 1900 rpm in 12th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		1197 lb.-ft (1623 Nm) @ 1349 rpm

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38% @ - 2100

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		19.86 gal./hr. & 16.15 HP hr./gal. @ 2100 rpm

	Standard PTO Speed @ Eng Speed		21.71 gal./hr. & 16.83 HP hr./gal. @ 1000 pto rpm & 1895 eng. rpm

	Maximum PTO Power @ Eng RPM		21.85 gal./hr. & 16.84 HP hr./gal. @ 1850 rpm

	Maximum Engine Power @ Eng RPM		15.03 HP hr./gal. @ 2100 rpm in 7th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.80 HP hr./gal. @ 1900 in 12th gear

	75% Load, Full Engine RPM (Unballasted)		13.71 HP hr./gal. @ 2100 in 7th gear

	75% Load @ Reduced RPM (Unballasted)		14.57 HP hr./gal. @ 1600 in 10th gear

Transmission

	Std. Transmission; Forward/Reverse		18/6 PowerShift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes (PST)

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		1.75-in. (44.5 mm)

	PTO Speeds @ Engine RPM		1000 PTO rpm @ 1,895 engine rpm

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Pressure & Flow Compensating Closed Center

	Pump Rated Output, GPM (L/min.)		48 (181)

		Standard	48 (181)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		30 (114)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20,000)

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		4 Std., 5 & 6 Optional

	Hitch Category (SAE Designation)		4N/3 or 4/4N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	16,070 lb

		Standard	15,300 lb

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9530T

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger with Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		319 (1207)

		Standard	---

		Optional	---

	Underhood muffler		no

Performance

	Advertised PTO HP (kW) @ Rated RPM		320 PTO hp (239) @ 1,895 rpm per SAE

	Official PTO HP (kW) @ Rated RPM		N/A

		@ Standard PTO @ Eng RPM	N/A

		Maximum @ Eng RPM	N/A

	Advertised Engine HP (kW) @ Rated Speed		491 (361) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		432.42 (322.45) @ 1800 rpm in 12th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		N/A

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38% @ - 2100

	Maximum Torque Rise % (PTO) @ Eng RPM		N/A

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		N/A

	Standard PTO Speed @ Eng Speed		N/A

	Maximum PTO Power @ Eng RPM		N/A

	Maximum Engine Power @ Eng RPM		15.03 HP hr./ gal. @2100 rpm in 7th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.62 HP hr./ gal. @1800 rpm in 11th gear

	75% Load, Full Engine RPM (Unballasted)		13.82 HP hr./ gal @ 2100 rpm in 7th gear

	75% Load @ Reduced RPM (Unballasted)		14.85 (2.92) @ 1800 rpm in 9th gear

Transmission

	Std. Transmission; Forward/Reverse		18/6 PowerShift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		1.75-in. (44.5 mm)

	PTO Speeds @ Engine RPM		1000 PTO rpm @ 1895 eng rpm

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Pressure & Flow Compensating Closed Center

	Pump Rated Output, GPM (L/min.)		48 (181)

		Standard	48 (181)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		30 (114)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20,000)

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		4 Std., 5 & 6 Optional

	Hitch Category (SAE Designation)		4/4N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	16,070 lb

		Standard	15,300 lb

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9630T

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger w/ Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 cu.in. (13.5 L)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		319 (1207 L)

		Standard	---

		Optional	---

	Underhood muffler		no

Performance

	Advertised PTO HP (kW) @ Rated RPM		320 PTO hp (239) @ 1,895 rpm per SAE

	Official PTO HP (kW) @ Rated RPM		N/A

		@ Standard PTO @ Eng RPM	N/A

		Maximum @ Eng RPM	N/A

	Advertised Engine HP (kW) @ Rated Speed		543 (399) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		462.5 (344.89) @ 1850 rpm in 12th gear

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		N/A

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38%

	Maximum Torque Rise % (PTO) @ Eng RPM		N/A

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		N/A

	Standard PTO Speed @ Eng Speed		N/A

	Maximum PTO Power @ Eng RPM		N/A

	Maximum Engine Power @ Eng RPM		15.05 HP hr./gal. @ 2100 rpm in 7th gear

	Max Unballasted Drawbar Power @ Eng RPM		15.54 HP hr./gal. @ 1850 rpm in 12th gear

	75% Load, Full Engine RPM (Unballasted)		14.16 HP hr./gal. @ 2100 rpm in 7th gear

	75% Load @ Reduced RPM (Unballasted)		14.94 HP hr./gal. @ 1750 rpm in 9th gear

Transmission

	Std. Transmission; Forward/Reverse		18/6 PowerShift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		1.75-in. (44.5 mm)

	PTO Speeds @ Engine RPM		1000 PTO rpm @ 1895 engine rpm

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Common Rail Pressure & Flow Compensating

	Pump Rated Output, GPM (L/min.)		48 (181)

		Standard	48 (181)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		30 (114)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 PSI (20,000 kPa)

	Maximum Hydraulic Power, HP (kW)		---

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		4 Std.; 5 & 6 Optional

	Hitch Category (SAE Designation)		4/4N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	16,070 lb

		Standard	15,300 lb

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9030 Series Scraper Special Tractor

Click model for specs

9430 Scraper Special

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger w/ Air-to-Air Aftercooling and Exhaust Gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		320 (239) @ 1,895 per SAE

	Official PTO HP (kW) @ Rated RPM		-

		@ Standard PTO @ Eng RPM	-

		Maximum @ Eng RPM	-

	Advertised Engine HP (kW) @ Rated Speed		439 (323) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		-

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		---

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38%

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		---

	Standard PTO Speed @ Eng Speed		---

	Maximum PTO Power @ Eng RPM		---

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		---

	75% Load, Full Engine RPM (Unballasted)		---

	75% Load @ Reduced RPM (Unballasted)		---

Transmission

	Std. Transmission; Forward/Reverse		18/6 Powershift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		---

	PTO Speeds @ Engine RPM		---

	PTO Actuation		---

Hydraulics

	Type		Common Rail, Pressure & Flow Compensating

	Pump Rated Output, GPM (L/min.)		---

		Standard	44

		Optional	75

	Rated Flow @ One SCV, GPM (L/min.)		30

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		58.3 (43.5)

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		4 Std., 5 & 6 Optional

	Hitch Category (SAE Designation)		NA

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		-

		OECD	---

		Standard	-

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9530 Scraper Special

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger w/Air-to-Air Aftercooling and Exhaust Gas Recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		N/A

	Official PTO HP (kW) @ Rated RPM		---

		@ Standard PTO @ Eng RPM	---

		Maximum @ Eng RPM	---

	Advertised Engine HP (kW) @ Rated Speed		491 (361) @2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		-

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		---

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38%

	Maximum Torque Rise % (PTO) @ Eng RPM		---

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		---

	Standard PTO Speed @ Eng Speed		---

	Maximum PTO Power @ Eng RPM		---

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		---

	75% Load, Full Engine RPM (Unballasted)		---

	75% Load @ Reduced RPM (Unballasted)		---

Transmission

	Std. Transmission; Forward/Reverse		18/6 Powershift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Power Take-Off (PTO)

	Standard		---

	Optional		---

	PTO Speeds @ Engine RPM		---

	PTO Actuation		---

Hydraulics

	Type		Common Flow, Pressure & Flow Compensating

	Pump Rated Output, GPM (L/min.)		---

		Standard	48 (182)

		Optional	75 (283)

	Rated Flow @ One SCV, GPM (L/min.)		30 (114)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 (20000)

	Maximum Hydraulic Power, HP (kW)		-

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		4 Std.

	Hitch Category (SAE Designation)		NA

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	-

		Optional	-

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

9630 Scraper Special

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger with Air-to-Air Aftercooling and exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/824 (13.5)

	Cylinder Liners		Wet Sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		350 (1325)

		Standard	350 (1325)

		Optional	---

	Underhood muffler		---

Performance

	Advertised PTO HP (kW) @ Rated RPM		N/A

	Official PTO HP (kW) @ Rated RPM		-

		@ Standard PTO @ Eng RPM	-

		Maximum @ Eng RPM	-

	Advertised Engine HP (kW) @ Rated Speed		543 (399) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		-

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		-

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38%

	Maximum Torque Rise % (PTO) @ Eng RPM		-

Transmission

	Std. Transmission; Forward/Reverse		18/6 PowerShift

	Opt. Transmission; Forward/Reverse		---

	Reverser		---

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		---

Hydraulics

	Type		Pressure & Flow Compensating

	Pump Rated Output, GPM (L/min.)		48 (218)

		Standard	48 (218)

		Optional	75 (354)

	Rated Flow @ One SCV, GPM (L/min.)		30 (136)

	Max Output @ SCV Couplers, GPM (L/min.)		---

	Maximum Operating Pressure, PSI (kPa)		2900 PSI (20,000 kPa)

	Maximum Hydraulic Power, HP (kW)		N/A

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		4 Std. 4 high flow optional

	Hitch Category (SAE Designation)		NA

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		-

	Sensing Type		Electrohydraulic

	Joystick SCV Control		---

7030 Small-Frame Series Tractor

Click model for specs

7130

Engine

	Manufacturer		John Deere

	Aspiration		2 valve, fixed geometry turbocharger with air-to-water aftercooling

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		Cab

		Standard	54.7 (207)

		Optional	66 (250)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		101 (75) @ 2300 per SAE (4.5L)

	Official PTO HP (kW) @ Rated RPM		N/A

		@ Standard PTO @ Eng RPM	N/A

		Maximum @ Eng RPM	N/A

	Advertised Engine HP (kW) @ Rated Speed		125 @ 2300 per ISO 97/68/EC (4.5L)

	Max Unballast Drwbr HP (kW) @ Eng RPM		N/A

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		N/A

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		N/A

	Maximum Torque Rise % (PTO) @ Eng RPM		N/A

Transmission

	Std. Transmission; Forward/Reverse		SyncroPlus 12F/4R (19 mph/ 30 km/h)

	Opt. Transmission; Forward/Reverse		Sync. 16/16; LH Reverser, PowrQuad 16/16, PowrQuad 24/24

	Reverser		Opt

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Opt

Power Take-Off (PTO)

	Standard		Independent 540/1000

	Optional		N/A

	PTO Speeds @ Engine RPM		N/A

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Constant Flow Load Sensing

	Pump Rated Output, GPM (L/min.)		---

		Standard	21.1

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		N/A

	Max Output @ SCV Couplers, GPM (L/min.)		N/A

	Maximum Operating Pressure, PSI (kPa)		2900 (19,995)

	Maximum Hydraulic Power, HP (kW)		N/A

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		1, 2, 3, or 4

	Hitch Category (SAE Designation)		Cat. 2

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	5110 lbs

		Optional	No

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Optional Electronic Lower Link

	Joystick SCV Control		---

7130 Premium

Engine

	Manufacturer		John Deere PowerTech Plus (4-valve)

	Aspiration		4 valve, variable geometry turbocharger with air-to-water aftercooling and exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		4/276 (4.5)

	Cylinder Liners		Wet sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	55 (208)

		Optional	66 (250)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		101 (75) @ 2300 per SAE (4.5L)

	Official PTO HP (kW) @ Rated RPM		N/A

		@ Standard PTO @ Eng RPM	N/A

		Maximum @ Eng RPM	N/A

	Advertised Engine HP (kW) @ Rated Speed		125 @ 2300 per ISO 97/68/EC (4.5L)

	Max Unballast Drwbr HP (kW) @ Eng RPM		N/A

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		N/A

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		N/A

	Maximum Torque Rise % (PTO) @ Eng RPM		N/A

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve)

	Opt. Transmission; Forward/Reverse		PowerQuad Plus 16/16 (19 mph/30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 24/24 (25 mph/40 kmh) w/ Power Tech Plus (4-valve); IVT (25 mph/40 kmh) w. PowerTech Plus (4-valve)

	Reverser		Yes

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Available with PowrQuad Plus and AutoQuad Plus

Power Take-Off (PTO)

	Standard		Independent 540/1000 rpm w/ reversible shaft

	Optional		Rear - 540/540E/1000 rpm, reversible shaft, shiftable in-cab; (Front - 1000 rpm, 21 spline)

	PTO Speeds @ Engine RPM		540 @ 2143 or 1000 @ 2208

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, Pressure and Flow Compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	29 (109.8)

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		26.0 (98.3)

	Max Output @ SCV Couplers, GPM (L/min.)		31.0 (117.4)

	Maximum Operating Pressure, PSI (kPa)		2900 (19,995)

	Maximum Hydraulic Power, HP (kW)		43.4 (32.4)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4

	Hitch Category (SAE Designation)		Standard II; (Opt. IIN/II w/ telescopic draft links

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	5110 (2318)

		Optional	8262 (3748)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electronic Lower Link

	Joystick SCV Control		Mechanical or Electronic

7230

Engine

	Manufacturer		John Deere 6.8L PowerTech E

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		6/414 (6.8)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	54.7 (207)

		Optional	66 (250)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		110 (82) @ 2300 per SAE

	Official PTO HP (kW) @ Rated RPM		N/A

		@ Standard PTO @ Eng RPM	N/A

		Maximum @ Eng RPM	N/A

	Advertised Engine HP (kW) @ Rated Speed		135 (99) @ 2300 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		N/A

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		N/A

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		N/A

	Maximum Torque Rise % (PTO) @ Eng RPM		N/A

Transmission

	Std. Transmission; Forward/Reverse		Synchronized 12/4

	Opt. Transmission; Forward/Reverse		Sync. 16/16; LH Reverser, PowrQuad 16/16, PowrQuad 24/24

	Reverser		Opt

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Opt

Power Take-Off (PTO)

	Standard		Independent 540/1000

	Optional		N/A

	PTO Speeds @ Engine RPM		TBD-Nebraska Test

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Constant Flow Load Sensing

	Pump Rated Output, GPM (L/min.)		---

		Standard	21.1

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		N/A

	Max Output @ SCV Couplers, GPM (L/min.)		N/A

	Maximum Operating Pressure, PSI (kPa)		2900 (19,995)

	Maximum Hydraulic Power, HP (kW)		N/A

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		1, 2, 3, or 4.

	Hitch Category (SAE Designation)		Cat. 2

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		N/A

		OECD	---

		Standard	5110

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Optional Electronic Lower Link

	Joystick SCV Control		---

7230 Premium

Engine

	Manufacturer		John Deere 6.8L PowerTech Plus (4-valve) and 6.8L PowerTech E (2-valve)

	Aspiration		Standard Variable Geometry Turbocharger with air-to-water aftercooling and exhaust gas recirculation (PowerTech Plus); Optional fixed geometry turbocharger with air-to-water aftercooling (PowerTech E)

	Cylinders/Displacement, cu. in. (liters)		6/415 (6.8)

	Cylinder Liners		Wet sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	55 (208)

		Optional	66 (250)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		110 (82.0) @ 2300 per SAE

	Official PTO HP (kW) @ Rated RPM		111.97 (83.50) @ 2301 per SAE

		@ Standard PTO @ Eng RPM	118.09 (88.06) @ 2200 per SAE

		Maximum @ Eng RPM	126.93 (94.65) @ 2000 per SAE

	Advertised Engine HP (kW) @ Rated Speed		135 (99) @ 2300 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		117.07 (87.30) @ 2002

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		369 (500) @1701

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		43% @ 1800

	Maximum Torque Rise % (PTO) @ Eng RPM		44.3% @ 1701

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		7.25 (27.44) & 15.45 (3.04) @ 2301

	Standard PTO Speed @ Eng Speed		7.42 (28.10) & 15.91 (3.13) @ 2220

	Maximum PTO Power @ Eng RPM		7.70 (29.13) & 16.49 (3.25) @ 2000

	Maximum Engine Power @ Eng RPM		7.20 (27.25) & 14.19 (2.80) @ 2297

	Max Unballasted Drawbar Power @ Eng RPM		7.67 (29.03) & 15.27 (3.01) @ 2002

	75% Load, Full Engine RPM (Unballasted)		6.38 (24.15) & 12.61 (2.48) @ 2398

	75% Load @ Reduced RPM (Unballasted)		5.78 (21.88) & 13.94 (2.75) @ 1969

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad PLUS 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine

	Opt. Transmission; Forward/Reverse		PowerQuad PLUS 16/16 (19 mph/30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 24/24 (25 mph/40 kmh) w/ Power Tech Plus (4-valve); IVT (25 mph/40 kmh) w. PowerTech Plus (4-valve)

	Reverser		Yes

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Available with PowrQuad PLUS and AutoQuad PLUS

Power Take-Off (PTO)

	Standard		Independent 540/1000 rpm w/ reversible shaft

	Optional		Rear - 540/540E/1000 rpm, reversible shaft, shiftable in-cab; (Front - 1000 rpm, 21 spline)

	PTO Speeds @ Engine RPM		540 @ 2143 or 1000 @ 2208

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, Pressure and Flow Compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	29 (109.8)

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		29.8 (112.8)

	Max Output @ SCV Couplers, GPM (L/min.)		30.7 (116.2)

	Maximum Operating Pressure, PSI (kPa)		2900 (19,995)

	Maximum Hydraulic Power, HP (kW)		44.3 (33.0)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4

	Hitch Category (SAE Designation)		Standard 2; (Opt. 2N/2 w/ telescopic draft links)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	5110 (2318)

		Optional	8262 (3748)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electronic Lower Link

	Joystick SCV Control		Mechanical or Electronic

7330

Engine

	Manufacturer		John Deere 6.8L PowerTech E

	Aspiration		Turbocharged

	Cylinders/Displacement, cu. in. (liters)		6/414 (6.8)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	66 (250)

		Optional	83 (315)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		127 (95) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		NA

		@ Standard PTO @ Eng RPM	NA

		Maximum @ Eng RPM	NA

	Advertised Engine HP (kW) @ Rated Speed		155 (114) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		NA

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		NA

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		NA

	Maximum Torque Rise % (PTO) @ Eng RPM		NA

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad 16/16

	Opt. Transmission; Forward/Reverse		PowrQuad 20/20

	Reverser		LH Base

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Opt

Power Take-Off (PTO)

	Standard		Independent 540/1000

	Optional		N/A

	PTO Speeds @ Engine RPM		NA

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Constant Flow Load Sensing

	Pump Rated Output, GPM (L/min.)		---

		Standard	21.1

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		NA

	Max Output @ SCV Couplers, GPM (L/min.)		NA

	Maximum Operating Pressure, PSI (kPa)		2500 (17,236)

	Maximum Hydraulic Power, HP (kW)		NA

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		1, 2, 3, or 4

	Hitch Category (SAE Designation)		2, 3N Optional

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	8800

		Optional	Cat 3N/2 - 8200

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	NA

		Optional	NA

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	NA

		Optional	NA

	Sensing Type		Electronic Lower Link

	Joystick SCV Control		N/A

7330 Premium

Engine

	Manufacturer		John Deere 6.8L PowerTech Plus (4-valve) engine and 6.8L PowerTech E (2-valve) engine

	Aspiration		Standard Variable Geometry Turbocharger with air-to-water aftercooling and exhaust gas recirculation (PowerTech Plus); Optional fixed geometry turbocharger with air-to-water aftercooling (PowerTech E)

	Cylinders/Displacement, cu. in. (liters)		6/415 (6.8)

	Cylinder Liners		Wet sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	66 (250)

		Optional	83 (315)

	Underhood muffler		Yes

Performance

	Advertised PTO HP (kW) @ Rated RPM		127 (95) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		129.48 (96.55) @ 2100

		@ Standard PTO @ Eng RPM	136.71 (101.95) @ 2100

		Maximum @ Eng RPM	140.69 (104.91) @ 2100

	Advertised Engine HP (kW) @ Rated Speed		155 (114) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		115.35 (86.01) @ 2103

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		463 (628) @1499

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		33% @ 1700

	Maximum Torque Rise % (PTO) @ Eng RPM		43.1%

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		7.97 gal/hr & 16.31 HP hr/gal

	Standard PTO Speed @ Eng Speed		8.08 gal/hr & 16.93 HP hr/gal

	Maximum PTO Power @ Eng RPM		8.17 gal/hr & 17.21 HP hr/gal

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		14.46 HP hr/gal

	75% Load, Full Engine RPM (Unballasted)		12.65 HP hr/gal

	75% Load @ Reduced RPM (Unballasted)		14.22 HP hr/gal

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine

	Opt. Transmission; Forward/Reverse		PowerQuad Plus 16/16 (19 mph/30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 24/24 (25 mph/40 kmh) w/ Power Tech Plus (4-valve); IVT (25 mph/40 kmh) w/ PowerTech Plus (4-valve)

	Reverser		LH Base

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Available with PowrQuad Plus and AutoQuad Plus

Power Take-Off (PTO)

	Standard		Independent 540/1000 rpm w/ reversible shaft

	Optional		Rear - 540/540E/1000 rpm, reversible shaft, shiftable in cab; (Front - 1000 rpm, 21 spline)

	PTO Speeds @ Engine RPM		540 @ 1987; 1000 @ 1995

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, Pressure and Flow Compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	29 (109.8)

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		30.2(113.2)

	Max Output @ SCV Couplers, GPM (L/min.)		30.6 (115.8)

	Maximum Operating Pressure, PSI (kPa)		2900 (19,995)

	Maximum Hydraulic Power, HP (kW)		37.1

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4

	Hitch Category (SAE Designation)		Standard II; (Opt. llN/ll w/ telescopic draft links)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	8,800 Cat II

		Optional	9,950 Cat II; 8200 or 9400 Cat IIIN/II

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electronic Lower Link

	Joystick SCV Control		Mechanical or Electronic

7430 Premium

Engine

	Manufacturer		John Deere 6.8L PowerTech Plus (4-valve) engine

	Aspiration		Standard Variable Geometry Turbocharger with air-to-water aftercooling and exhaust gas recirculation (PowerTech Plus); Optional fixed geometry turbocharger with air-to-water aftercooling (PowerTech E)

	Cylinders/Displacement, cu. in. (liters)		6/415 (6.8)

	Cylinder Liners		Wet sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	83 (315)

		Optional	---

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		140 (104) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		141.13 (105.24) @ 2101 per SAE

		@ Standard PTO @ Eng RPM	157.31 (117.30) @ 1961 per SAE

		Maximum @ Eng RPM	161.22 (107.36) @ 1701 per SAE

	Advertised Engine HP (kW) @ Rated Speed		170 (125) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		142.15 (106.00) @ 1697

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		513 (695) @1602

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		41% @ 1699

	Maximum Torque Rise % (PTO) @ Eng RPM		45.2% @ 1602

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		8.48 (32.08) & 16.65 (3.28) @ 2101

	Standard PTO Speed @ Eng Speed		9.09 (34.45) & 17.30 (3.40) @ 1961

	Maximum PTO Power @ Eng RPM		9.34 (35.37) & 17.26 (3.40) @ 1701

	Maximum Engine Power @ Eng RPM		8.39 (31.76) & 15.08 (2.97) @ 2099

	Max Unballasted Drawbar Power @ Eng RPM		9.33 (35.32) & 15.24 (3.00) @ 1697

	75% Load, Full Engine RPM (Unballasted)		7.31 (27.67) & 13.71 (2.70) @ 2175

	75% Load @ Reduced RPM (Unballasted)		6.95 (26.31) & 14.41 (2.84) @ 1717

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine

	Opt. Transmission; Forward/Reverse		PowerQuad Plus 16/16 (19 mph/30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 20/20 (25 mph/40 kmh) w/ Power Tech Plus (4-valve); IVT (25 mph/40 kmh) w/ PowerTech Plus (4-valve)

	Reverser		LH Base

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Available with PowrQuad Plus and AutoQuad Plus

Power Take-Off (PTO)

	Standard		Independent 540/1000 rpm w/ reversible shaft

	Optional		Rear - 540E/1000/1000E rpm, reversible shaft, shiftable in cab; (Front - 1000 rpm, 21 spline)

	PTO Speeds @ Engine RPM		540 @ 1778 or 1000 @ 1950: Economy PTO 1000 @ 1950

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, Pressure and Flow Compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	29 (109.8)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		29.4 (111.2)

	Max Output @ SCV Couplers, GPM (L/min.)		29.9 (113.0)

	Maximum Operating Pressure, PSI (kPa)		2900 (19,995)

	Maximum Hydraulic Power, HP (kW)		43.2 (32.2)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4

	Hitch Category (SAE Designation)		Standard III

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	10,600 Advertised

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	11,049 (49.1) NE Tested

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electronic Lower Link

	Joystick SCV Control		Mechanical or Electronic

7530 Premium

Engine

	Manufacturer		John Deere 6.8L PowerTech Plus (4-valve) engine and 6.8L PowerTech E (2-valve) engine

	Aspiration		Standard Variable Geometry Turbocharger with air-to-water aftercooling and exhaust gas recirculation (PowerTech Plus); Optional fixed geometry turbocharger with air-to-water aftercooling (PowerTech E)

	Cylinders/Displacement, cu. in. (liters)		6/415 (6.8)

	Cylinder Liners		Wet sleeve

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	83 (315)

		Optional	---

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		153 (114) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		157.6 (117.5) @ 2100

		@ Standard PTO @ Eng RPM	174.6 (130.2) @ 1950

		Maximum @ Eng RPM	175.8 (131.1) @ 1901

	Advertised Engine HP (kW) @ Rated Speed		180 (133) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		142.8 (106.5) @ 2101

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		559 (758) @ 1402

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		36% @ 1700

	Maximum Torque Rise % (PTO) @ Eng RPM		41.9%

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		9.04 gal/hr; 17.43 Hp.hr./gal

	Standard PTO Speed @ Eng Speed		9.63 gal/hr; 18.12 Hp.hr./gal

	Maximum PTO Power @ Eng RPM		9.64 gal/hr; 18.22 Hp.hr./gal

	Maximum Engine Power @ Eng RPM		---

	Max Unballasted Drawbar Power @ Eng RPM		15.58 Hp.hr./gal

	75% Load, Full Engine RPM (Unballasted)		14.47 Hp.hr./gal

	75% Load @ Reduced RPM (Unballasted)		14.70 Hp.hr./gal

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine

	Opt. Transmission; Forward/Reverse		PowerQuad Plus 16/16 (19 mph/30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 20/20 (25 mph/40 kmh) w/ Power Tech Plus (4-valve); IVT (25 mph/40 kmh) w/ PowerTech Plus (4-valve)

	Reverser		LH Base

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Available with PowrQuad Plus and AutoQuad Plus

Power Take-Off (PTO)

	Standard		Independent 540/1000 rpm w/ reversible shaft

	Optional		Rear - 540E/1000/1000E rpm, reversible shaft, shiftable in cab; (Front - 1000 rpm, 21 spline)

	PTO Speeds @ Engine RPM		540 @ 1778; 1000 @ 1950

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, Pressure and Flow Compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	29 (109.8)

		Optional	---

	Rated Flow @ One SCV, GPM (L/min.)		29 (110)

	Max Output @ SCV Couplers, GPM (L/min.)		32.7 (123.6)

	Maximum Operating Pressure, PSI (kPa)		3135

	Maximum Hydraulic Power, HP (kW)		45.7 (34.1)

	Hitch Draft Control Load Sense Type		---

	Remote Control Valves Available		Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4

	Hitch Category (SAE Designation)		Standard III

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		10,600* Advertised

		OECD	---

		Standard	11,049 OECD Tested

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electronic Lower Link

	Joystick SCV Control		Mechanical or Electronic

2011 8R/8RT Tractor

Click model for specs

8235R

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	180 (681)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		192 (143) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		235 (173) @ 2100 per ISO 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		PowerShift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Optional left hand or right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		1-3/4-in. capable of 1-3/8-in. 540/1000; 1-3/4-in. 1000 with 1-3/8-in. 540/1000

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed center; pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	44 (166.6)

		Optional	60 (227.1)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		3/3N standard (3/3N or 4N/3 optional)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TDB - Nebraska Test

		Standard	13,800 (6259)

		Optional	17,300 (7847) or 18,300 (8301)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		Optional

8260R

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	180 (681)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		213 (159) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		260 (191) @ 2100 per 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		PowerShift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Optional left hand or right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		1-3/4-in. capable of 1-3/8-in. 540/1000; 1-3/4-in. 1000 with 1-3/8-in. 540/1000

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed center; pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	44 (166.6)

		Optional	60 (227.1)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Max Output @ SCV Couplers, GPM (L/min.)		TBD- Nebraska Test

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Maximum Hydraulic Power, HP (kW)		TBD - Nebraska Test

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		3/3N standard (3/3N or 4N/3 optional)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TDB - Nebraska Test

		Standard	13,800 (6259)

		Optional	17,300 (7847) or 18,300 (8301)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		Optional

8285R

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	180 (681)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		234 (175) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		285 (210) @ 2100 per 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		PowerShift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Optional left hand or right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		1-3/4-in. capable of 1-3/8-in. 540/1000; 1-3/4-in. 1000 with 1-3/8-in. 540/1000

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed center; pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	44 (166.6)

		Optional	60 (227.1)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Maximum Hydraulic Power, HP (kW)		TBD - Nebraska Test

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		3/3N standard (3/3N or 4N/3 optional)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TDB - Nebraska Test

		Standard	13,800 (6260)

		Optional	17,300 (7847) or 18,300 (8300)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		Optional

8310R

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	180 (681)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised Engine HP (kW) @ Rated Speed		310 (228) @ 2100 per 97/68EC PS
Transmission

	Std. Transmission; Forward/Reverse		PowerShift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Optional left hand or right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540*/1000 rpm gearcase

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed center; pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	60 (227.1)

		Optional	44 (166.6)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		4N/3

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TDB - Nebraska Test

		Standard	18,300 (8300)

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		Optional

8335R

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	180 (681)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		276 hp (205 kW) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		335 (246) @2100 per SAE

Transmission

	Std. Transmission; Forward/Reverse		PowerShift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Optional left hand or right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540*/1000 rpm gearcase

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed center; pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	60 (227.1)

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		4N/3

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TBD - Nebraska Test

		Standard	18,300 (8,301)

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		Optional

8360R

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	180 (681)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		296 (221) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		360 (265) @ 2100 per 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		IVT

	Opt. Transmission; Forward/Reverse		N/A

	Reverser		Optional LH or RH with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		N/A

	PTO Speeds @ Engine RPM		1000 @ 2000 ( For IVT)

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed center; pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	60 (227.1)

		Optional	N/A

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		4N/3

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TDB - Nebraska Test

		Standard	18,300 lb (8,301 kg)

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		Optional

8310RT

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	200 (758)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		247 (184) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		310 (228) @ 2100 per 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		Powershift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in, 20 spline, 1000

	Optional		N/A

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	44 (166.6)

		Optional	60 (227.1)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,000)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		3/3N standard (4N/3 optional)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TBD - Nebraska Test

		Standard	21167 (94.2 kN)

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		N/A

8335RT

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	200 (758)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		268 (200) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		335 (246) @ 2100 per 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		Powershift, 16F/4R

	Opt. Transmission; Forward/Reverse		IVT

	Reverser		Right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in., 20 spline, 1000

	Optional		N/A

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	44 (166.6)

		Optional	60 (227.1)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		4N/3

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TBD - Nebraska Test

		Standard	19,300 (8754)

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		N/A

8360RT

Engine

	Manufacturer		John Deere

	Aspiration		Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation

	Cylinders/Displacement, cu. in. (liters)		6/548 (9.0)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	200 (758)

		Optional	N/A

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		288 (215) @ 2100 per SAE

	Advertised Engine HP (kW) @ Rated Speed		360 (265) @ 2100 per 97/68EC PS

Transmission

	Std. Transmission; Forward/Reverse		IVT

	Opt. Transmission; Forward/Reverse		N/A

	Reverser		Right hand with IVT

	On-the-Go Shifting (Yes/No/Partial)		Yes

	Clutch; Wet/Dry		Wet

	Creeper		Yes, IVT

Power Take-Off (PTO)

	Standard		1-3/4-in, 20 spline, 1000

	Optional		N/A

	PTO Speeds @ Engine RPM		1000 @ 2003

	PTO Actuation		Electrohydraulic

Hydraulics

	Type		Closed-center, pressure and flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	44 (166.6)

		Optional	60 (227.1)

	Rated Flow @ One SCV, GPM (L/min.)		35 (132)

	Maximum Operating Pressure, PSI (kPa)		2958 (20,400)

	Hitch Draft Control Load Sense Type		Electrohydraulic

	Remote Control Valves Available		4 standard (3 or 5 optional)

	Hitch Category (SAE Designation)		4N/3

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	TBD - Nebraska Test

		Standard	19,300 (8754)

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	N/A

		Optional	N/A

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	N/A

		Optional	N/A

	Sensing Type		Electrohydraulic

	Joystick SCV Control		N/A

7030 Large-Frame Series Tractor

Click model for specs

7630

ngine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger, Cooled Exhaust Gas Recirculation, Air-to-Air Aftercooled

	Cylinders/Displacement, cu. in. (liters)		6/414 (6.8)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	103 (390) without right hand step

		Optional	94 (356) with right hand step

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		140 (104) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		141.66 (105.63) @ 2100 per SAE

		@ Standard PTO @ Eng RPM	157.93 (117.77) @ 1953 per SAE

		Maximum @ Eng RPM	161.88 (120.71) @ 1750 per SAE

	Advertised Engine HP (kW) @ Rated Speed		175 (129) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		126.97 (94.68) @ 2100

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		523 lb-ft (710) @ 1602

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		41% @ 1700

	Maximum Torque Rise % (PTO) @ Eng RPM		47.8% @ 1602

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		8.31 gal/hr, 17.05 HP hr/gal @ 2100

	Standard PTO Speed @ Eng Speed		8.88 gal/hr, 17.78 HP hr/gal @ 1953

	Maximum PTO Power @ Eng RPM		8.91 gal/hr, 18.16 HP hr/gal @ 1750

	Maximum Engine Power @ Eng RPM		8.91 gal/hr, 18.16 HP hr/gal @ 1750

	Max Unballasted Drawbar Power @ Eng RPM		15.20 HP hr/gal @ 2100

	75% Load, Full Engine RPM (Unballasted)		13.93 HP hr/gal @ 2159

	75% Load @ Reduced RPM (Unballasted)		15.84 HP hr/gal @ 1494

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad PLUS (30K); 16F/16R

	Opt. Transmission; Forward/Reverse		AutoQuad PLUS (40K/50K), IVT (40K/50K)

	Reverser		Left-hand (LH or RH with IVT)

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		IVT

Power Take-Off (PTO)

	Standard		1-3/8-in. 540/1000

	Optional		1-3/4-in. 1000 or 1-3/8-in. 540E/1000/1000E

	PTO Speeds @ Engine RPM		540 or 1000 @ 1950; 540E or 1000E @ 1750

	PTO Actuation		Electro-hydraulic

Hydraulics

	Type		Closed center, pressure & flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	32.2 (121.9)

		Optional	45 (170.3)

	Rated Flow @ One SCV, GPM (L/min.)		30 (113.5)

	Max Output @ SCV Couplers, GPM (L/min.)		32.2 (121.9) std., 45 (170.3) opt.

	Maximum Operating Pressure, PSI (kPa)		2962 (20422) std., 2895 (19960) opt.

	Maximum Hydraulic Power, HP (kW)		48.6 (36.2) std., 65.9 (49.1) opt.

	Hitch Draft Control Load Sense Type		Electronic

	Remote Control Valves Available		2 std.; 4 rear, 2 Mid-Mounts + 1 on/off (max. 7) opt.

	Hitch Category (SAE Designation)		3/3N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	10,987 (4,983)

		Optional	15,574 (7,064)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electro-hydraulic

	Joystick SCV Control		Opt. Mechanical or Electro-hydraulic

7730

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger, Cooled Exhaust Gas Recirculation, Air-to-Air Aftercooled

	Cylinders/Displacement, cu. in. (liters)		6/414 (6.8)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	103 (390) without right hand step

		Optional	94 (356) with right hand step

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		152 (113) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		153.29 (114.31) @ 2100 per SAE

		@ Standard PTO @ Eng RPM	168.19 (125.42) @ 1954 per SAE

		Maximum @ Eng RPM	172.51 (128.64) @ 1900 per SAE

	Advertised Engine HP (kW) @ Rated Speed		190 (142) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		139.10 (103.73) @ 2099

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		564 lb-ft (764) @ 1600

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38% @ 1698

	Maximum Torque Rise % (PTO) @ Eng RPM		47.1% @ 1600

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		9.0 gal/hr, 17.03 HP hr/gal @ 2100

	Standard PTO Speed @ Eng Speed		9.48 gal/hr, 17.75 HP hr/gal @ 1954

	Maximum PTO Power @ Eng RPM		9.6 gal/hr, 17.98 HP hr/gal @ 1900

	Maximum Engine Power @ Eng RPM		9.6 gal/hr, 17.98 HP hr/gal @ 1900

	Max Unballasted Drawbar Power @ Eng RPM		15.02 HP hr/gal @ 2099

	75% Load, Full Engine RPM (Unballasted)		13.98 HP hr/gal @ 2160

	75% Load @ Reduced RPM (Unballasted)		15.22 HP hr/gal @ 1632

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad PLUS (30K); 16F/16R

	Opt. Transmission; Forward/Reverse		AutoQuad PLUS (40K/50K), IVT (40K/50K)

	Reverser		Left-hand (LH or RH with IVT)

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		IVT

Power Take-Off (PTO)

	Standard		1-3/8-in. 540/1000

	Optional		1-3/4-in. 1000 or 1-3/8-in. 540E/1000/1000E

	PTO Speeds @ Engine RPM		540 or 1000 @ 1950; 540E or 1000E @ 1750

	PTO Actuation		Electro-hydraulic

Hydraulics

	Type		Closed center, pressure & flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	32 (121.1)

		Optional	45 (170.3)

	Rated Flow @ One SCV, GPM (L/min.)		30 (113.5)

	Max Output @ SCV Couplers, GPM (L/min.)		32 (121.1) std., 45 (170.3) opt.

	Maximum Operating Pressure, PSI (kPa)		2914 (20091) std., 2895 (19960) opt.

	Maximum Hydraulic Power, HP (kW)		46.9 (35) std., 65.9 (49.1) opt.

	Hitch Draft Control Load Sense Type		Electronic

	Remote Control Valves Available		2 std.; 4 rear, 2 Mid-Mounts + 1 on/off (max. 7) opt.

	Hitch Category (SAE Designation)		3/3N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	10,987 (4,983)

		Optional	15,574 (7,064)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electro-hydraulic

	Joystick SCV Control		Opt. Mechanical or Electro-hydraulic

7830

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger, Cooled Exhaust Gas Recirculation, Air-to-Air Aftercooled

	Cylinders/Displacement, cu. in. (liters)		6/414 (6.8)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	103 (390) without right hand step

		Optional	94 (356) with right hand step

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		165 (123) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		166.81 (124.39) @ 2100 per SAE

		@ Standard PTO @ Eng RPM	183.39 (136.75) @ 1953 per SAE

		Maximum @ Eng RPM	189.15 (141.05) @ 1749 per SAE

	Advertised Engine HP (kW) @ Rated Speed		205 (153) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		148.48 (110.72) @ 2099

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		608 lb-ft (825) @ 1598

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		38% @ 1703

	Maximum Torque Rise % (PTO) @ Eng RPM		45.9% @ 1598

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		9.62 gal/hr, 17.35 HP hr/gal @ 2100

	Standard PTO Speed @ Eng Speed		10.26 gal/hr, 17.88 HP hr/gal @ 1953

	Maximum PTO Power @ Eng RPM		10.51 gal/hr, 18.00 HP hr/gal @1749

	Maximum Engine Power @ Eng RPM		10.51 gal/hr, 18.00 HP hr/gal @1749

	Max Unballasted Drawbar Power @ Eng RPM		15.37 HP hr/gal @ 2099

	75% Load, Full Engine RPM (Unballasted)		14.23 HP hr/gal @ 2158

	75% Load @ Reduced RPM (Unballasted)		16.12 HP hr/gal @ 1487

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad PLUS (30K); 16F/16R

	Opt. Transmission; Forward/Reverse		AutoQuad PLUS (40K/50K), IVT (40K/50K)

	Reverser		Left-hand (LH or RH with IVT)

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000 capable of 1-3/8-in. 540/1000

	Optional		1-3/4 in. 20 spline 1000 or 1-3/4-in. 20 spline 1000 with 1-3/8-in. 540/1000 gearcase

	PTO Speeds @ Engine RPM		540 or 1000 @ 1950

	PTO Actuation		Electro-hydraulic

Hydraulics

	Type		Closed center, pressure & flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	32 (121.1)

		Optional	45 (170.3)

	Rated Flow @ One SCV, GPM (L/min.)		30 (113.5)

	Max Output @ SCV Couplers, GPM (L/min.)		32 (121.1) std., 45 (170.3) opt.

	Maximum Operating Pressure, PSI (kPa)		2914 (20091) std., 2895 (19960) opt.

	Maximum Hydraulic Power, HP (kW)		46.9 (35) std., 65.9 (49.1) opt.

	Hitch Draft Control Load Sense Type		Electronic

	Remote Control Valves Available		2 std.; 4 rear, 2 Mid-Mounts + 1 on/off (max. 7) opt.

	Hitch Category (SAE Designation)		3/3N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	10,987 (4,983)

		Optional	15,574 (7,064)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electro-hydraulic

	Joystick SCV Control		Opt. Mechanical or Electro-hydraulic

7930

Engine

	Manufacturer		John Deere

	Aspiration		Variable Geometry Turbocharger, Cooled Exhaust Gas Recirculation, Air-to-Air Aftercooled

	Cylinders/Displacement, cu. in. (liters)		6/414 (6.8)

	Cylinder Liners		Wet

	Fuel Tank Cap., US Gal. (L) (Open; Cab)		---

		Standard	103 (390) without right hand step

		Optional	94 (356) with right hand step

	Underhood muffler		N/A

Performance

	Advertised PTO HP (kW) @ Rated RPM		180 (134) @ 2100 per SAE

	Official PTO HP (kW) @ Rated RPM		183.1 (136.54) @ 2100 per SAE

		@ Standard PTO @ Eng RPM	200.73 (149.68) @ 1953 per SAE

		Maximum @ Eng RPM	203.38 (151.66) @ 1850 per SAE

	Advertised Engine HP (kW) @ Rated Speed		220 (164) @ 2100 per ISO 97/68/EC

	Max Unballast Drwbr HP (kW) @ Eng RPM		165.51 (123.42) @ 2102

	Maximum Torque (PTO) @ RPM, lb-ft (Nm)		653 lb-ft (885) @ 1601

	Max Torque Rise (80% Rtd Spd) @ Eng RPM		36% @ 1701

	Maximum Torque Rise % (PTO) @ Eng RPM		42.5% @ 1601

Fuel Use, U.S. gal./hr. & HP hr./gal. at:

	PTO @ Rated Eng RPM		10.52 gal/hr, 17.41 HP hr/gal @ 2100

	Standard PTO Speed @ Eng Speed		11.26 gal/hr, 17.82 HP hr/gal @ 1953

	Maximum PTO Power @ Eng RPM		11.37 gal/hr, 17.89 HP hr/gal @ 1850

	Maximum Engine Power @ Eng RPM		11.37 gal/hr, 17.89 HP hr/gal @ 1850

	Max Unballasted Drawbar Power @ Eng RPM		15.75 HP hr/gal @ 2102

	75% Load, Full Engine RPM (Unballasted)		14.72 HP hr/gal @ 2157

	75% Load @ Reduced RPM (Unballasted)		16.20 HP hr/gal @ 1613

Transmission

	Std. Transmission; Forward/Reverse		PowrQuad PLUS (30K); 16F/16R

	Opt. Transmission; Forward/Reverse		AutoQuad PLUS (40K/50K), IVT (40K/50K)

	Reverser		Left-hand (LH or RH with IVT)

	On-the-Go Shifting (Yes/No/Partial)		Partial

	Clutch; Wet/Dry		Wet

	Creeper		IVT

Power Take-Off (PTO)

	Standard		1-3/4-in. 20 spline 1000

	Optional		1-3/4-in. 20 spline 1000 capable of 1-3/8-in. 540/1000; 1-3/4-in. 20 spline 1000 with 1-3/8-in. 540/1000 gearcase

	PTO Speeds @ Engine RPM		540 or 1000 at 1950

	PTO Actuation		Electro-hydraulic

Hydraulics

	Type		Closed center, pressure & flow compensated

	Pump Rated Output, GPM (L/min.)		---

		Standard	32 (121.1)

		Optional	45.2 (171.1)

	Rated Flow @ One SCV, GPM (L/min.)		30 (113.5)

	Max Output @ SCV Couplers, GPM (L/min.)		32 (121.1) std., 45.2 (171.1) opt.

	Maximum Operating Pressure, PSI (kPa)		2914 (20091) std., 2894 (19953) opt.

	Maximum Hydraulic Power, HP (kW)		46.9 (35) std., 65.4 (48.7) opt.

	Hitch Draft Control Load Sense Type		Electronic

	Remote Control Valves Available		2 std.; 4 rear, 2 Mid-Mounts + 1 on/off (max. 7) opt.

	Hitch Category (SAE Designation)		3/3N

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.		---

		OECD	---

		Standard	10,987 (4,983)

		Optional	15,574 (7,064)

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)		---

		Standard	---

		Optional	---

	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)		---

		Standard	---

		Optional	---

	Sensing Type		Electro-hydraulic

	Joystick SCV Control		Opt. Mechanical or Electro-hydraulic

Combines

Click model for specs

9570 STS

Headers

	Platforms	15 ft, 20 ft, 22 ft, 25 ft, 30 ft

	Row-Crop Heads	---

	Corn Heads	4 Wide, 6 Wide, 6 & 8 Narrow

Feeding

	Drive	Fixed or Variable

	Conveyor	Under-shot slat

	Width	44-in. (1120 mm)

	Length	68-in. (1727 mm)

	Fixed Speed	---

	Variable Speed	520 to 780 rpm

	Reverser	Standard

Threshing

	Cylinder/Rotor Dia. Width	24-in. x 123-in. (600 mm x 3130 mm)

	Cylinder/Rotor Speed Range-Single	---

	Cylinder/Rotor Speed Range-Dual	230 to 1300 rpm

	Concave Area	1395 sq. in. (.9 m2)

	Number of concave bars	---

	Number of rasp bars	---

	Over-shot beater diameter - in. (mm)	---

	Over-shot beater speed - ft/sec (m/sec)	---

	Beater Grate Area	---

Tine Separator and Separator Concave

	Tine separator diameter - in. (mm)	---

	Tine separator speed - ft/sec (m/sec)	---

Separating

	Separator Type	Rotary

	Separator Length	---

	Separating Area	2016 sq. in. (1.3 m2)

	Discharge Grate Area	464 sq. in. (.3 m2)

Cleaning System

	Pre-Cleaner	1209 sq. in. (.78 m2)

	Chaffer/Extension Area	2309 sq. in. (1.49 m2)

	Sieve Area	1977 sq. in. (1.28 m2)

	Total Cleaning Area	5495 sq. in. (3.55 m2)

	Cleaning Fan Speed	620 to 1200 rpm

	Self-Leveling	---

Engine

	Type	John Deere 6-cyl. 6.8 L

	Displacement	414 cu. in. (6.8 L)

	Cooling	Air-to-Air Aftercooler

	Rated Speed	2300 rpm

	Horsepower	265

	Horsepower with Power Boost	298

Grain Handling

	Grain Tank Size	250 bu. (8800 L)

	Unloading Auger Length	18.5-ft. or 21.5-ft. optional

	Unloading Rate	2.2 bu./sec. (77.5 L/sec.)

	Unloading Discharge Height	13-ft. 3 in. (4.07 m) or 14-ft. (4.28 m)

Capacities

	Fuel Capacity	200 gal. (757 L)

	Transport Height (in the field position)	14-ft. 10 in. (4.52 m)

Base Weight-Less Head

	Grain	---

	Corn	29,945 lb. (13583 kg)

9670 STS

Headers

	Platforms	25 ft, 30 ft, 35 ft, 40 ft

	Row-Crop Heads	---

	Corn Heads	12 Narrow, 8 Wide

Feeding

	Drive	Fixed or Variable

	Conveyor	Under-shot slat

	Width	55-in. (1397 mm)

	Length	68-in. (1727 mm)

	Fixed Speed	520 rpm

	Variable Speed	520 to 780 rpm

	Reverser	Standard

Threshing

	Cylinder/Rotor Dia. Width	30-in. x 123-in. (750 mm x 3130 mm)

	Cylinder/Rotor Speed Range-Single	---

	Cylinder/Rotor Speed Range-Dual	210 to 1000 rpm

	Concave Area	1705 sq. in. (1.1 m2)

	Number of concave bars	---

	Number of rasp bars	---

	Over-shot beater diameter - in. (mm)	---

	Over-shot beater speed - ft/sec (m/sec)	---

	Beater Grate Area	---

Tine Separator and Separator Concave

	Tine separator diameter - in. (mm)	---

	Tine separator speed - ft/sec (m/sec)	---

Separating

	Separator Type	Rotary

	Separator Length	---

	Separating Area	2390 sq. in. (1.54 m2)

	Discharge Grate Area	555 sq. in. (0.36 m2)

Cleaning System

	Pre-Cleaner	1519 sq. in. (0.98 m2)

	Chaffer/Extension Area	2934 sq. in. (1.89 m2)

	Sieve Area	2511 sq. in. (1.62 m2)

	Total Cleaning Area	6964 sq. in. (4.49 m2)

	Cleaning Fan Speed	620 to 1200 rpm

	Self-Leveling	---

Engine

	Type	John Deere 6 cyl. 9.0 L

	Displacement	548 cu. in. (9.0 L)

	Cooling	Air-to-Air Aftercooler

	Rated Speed	2200 rpm

	Horsepower	305

	Horsepower with Power Boost	338

Grain Handling

	Grain Tank Size	250 bu. (8800 L) or 300 bu. (10,600 L) optional

	Unloading Auger Length	21.5-ft, 22.5-ft or 26-ft with high unload rate

	Unloading Rate	2.2 bu./sec. or 3.3 bu./sec. optional

	Unloading Discharge Height	14-ft. 3-in. (4.35 m)

Capacities

	Fuel Capacity	250 gal. (945 L)

	Transport Height (in the field position)	14-ft. 10-in. (4.52 m)

Base Weight-Less Head

	Grain	---

	Corn	32,661 lb. (14815 kg)

9770 STS

Headers

	Platforms	25 ft, 30 ft, 35 ft, 40 ft, and Belt Pick Up

	Row-Crop Heads	---

	Corn Heads	12 Narrow, 8 Wide

Feeding

	Drive	Fixed or Variable

	Conveyor	Under-shot slat

	Width	55-in. (1397 mm)

	Length	68-in. (1727 mm)

	Fixed Speed	520 rpm

	Variable Speed	520 to 780 rpm

	Reverser	Standard

Threshing

	Cylinder/Rotor Dia. Width	30-in. x 123-in. (750 mm x 3130 mm)

	Cylinder/Rotor Speed Range-Single	---

	Cylinder/Rotor Speed Range-Dual	210 to 1000 rpm

	Concave Area	1705 sq. in. (1.1 m2)

	Number of concave bars	---

	Number of rasp bars	---

	Over-shot beater diameter - in. (mm)	---

	Over-shot beater speed - ft/sec (m/sec)	---

	Beater Grate Area	---

Tine Separator and Separator Concave

	Tine separator diameter - in. (mm)	---

	Tine separator speed - ft/sec (m/sec)	---

Separating

	Separator Type	Rotary

	Separator Length	---

	Separating Area	2390 sq. in. (1.54 m2)

	Discharge Grate Area	555 sq. in. (0.36m2)

Cleaning System

	Pre-Cleaner	1519 sq. in. (0.98 m2)

	Chaffer/Extension Area	2934 sq. in. (1.89 m2)

	Sieve Area	2511 sq. in. (1.62 m2)

	Total Cleaning Area	6964 sq. in. (4.49 m2)

	Cleaning Fan Speed	620 to 1200 rpm

	Self-Leveling	---

Engine

	Type	John Deere 6-cyl. 9.0 L

	Displacement	548 cu. in. (9.0 L)

	Cooling	Air-to-Air Aftercooler

	Rated Speed	2200 rpm

	Horsepower	360

	Horsepower with Power Boost	385

Grain Handling

	Grain Tank Size	300 bu. (10600 L)

	Unloading Auger Length	21.5-ft, 22.5-ft or 26-ft with high unload rate

	Unloading Rate	3.3 bu./sec.

	Unloading Discharge Height	14-ft. 3-in. (4.35 m) or 14-ft. 4-in. (4.37 m)

Capacities

	Fuel Capacity	250 gal. (945 L)

	Transport Height (in the field position)	14-ft. 10-in (4.52 m)

Base Weight-Less Head

	Grain	---

	Corn	32765 lb. (14862 kg)

9870 STS

Headers

	Platforms	25 ft, 30 ft, 35 ft, 40 ft, and Belt Pick Up

	Row-Crop Heads	---

	Corn Heads	12 Narrow, 8 Wide

Feeding

	Drive	Fixed or Variable

	Conveyor	Under-shot slat

	Width	55-in. (1397 mm)

	Length	68-in. (1727 mm)

	Fixed Speed	520 rpm

	Variable Speed	520 to 780 rpm

	Reverser	Standard

Threshing

	Cylinder/Rotor Dia. Width	30-in. x 123-in. (750 mm x 3130 mm)

	Cylinder/Rotor Speed Range-Single	---

	Cylinder/Rotor Speed Range-Dual	210 to 1000 rpm

	Concave Area	1705 sq. in. (1.1 m2)

	Number of concave bars	---

	Number of rasp bars	---

	Over-shot beater diameter - in. (mm)	---

	Over-shot beater speed - ft/sec (m/sec)	---

	Beater Grate Area	---

Tine Separator and Separator Concave

	Tine separator diameter - in. (mm)	---

	Tine separator speed - ft/sec (m/sec)	---

Separating

	Separator Type	Rotary

	Separator Length	---

	Separating Area	2390 sq. in. (1.54 m2)

	Discharge Grate Area	698 sq in (.45 m2)

Cleaning System

	Pre-Cleaner	2698 sq. in. (1.74 m2)

	Chaffer/Extension Area	2934 sq. in. (1.89 m2) or 2708 sq in (1.75 m2) with Self-Leveling

	Sieve Area	2511 sq. in. (1.62 m2) or 2383 sq in (1.54 m2) with self-leveling

	Total Cleaning Area	8143 sq. in. (5.25 m2) or 7789 sq in (5.03 m2) with Self-Leveling

	Cleaning Fan Speed	620 to 1250 rpm

	Self-Leveling	Optional

Engine

	Type	John Deere 6-cyl 13.5 L

	Displacement	824 cu in (13.5 L)

	Cooling	Air-to-Air Aftercooler

	Rated Speed	2200 rpm

	Horsepower	440

	Horsepower with Power Boost	471

Grain Handling

	Grain Tank Size	300 bu. (10,600 L)

	Unloading Auger Length	22.5-ft or 26-ft with high unload rate

	Unloading Rate	3.3 bu/sec

	Unloading Discharge Height	14-ft. 4-in. (4.37 m)

Capacities

	Fuel Capacity	305 gal (1,155 L)

	Transport Height (in the field position)	14-ft. 9-in. (4.53 m)

Base Weight-Less Head

	Grain	---

	Corn	36,114 lb. (16381 kg)

T670

Headers

	Platforms	25', 30', 36' and 615 Belt pick-up

	Row-Crop Heads	---

	Corn Heads	---

Feeding

	Drive	Fixed

	Conveyor	Under shot-slat

	Width	65.6-in (1664mm)

	Length	78-in (1981mm)

	Fixed Speed	520 rpm

	Variable Speed	---

	Reverser	Mechanical-hydraulic; std.

Threshing

	Cylinder/Rotor Dia. Width	26-in x 66-in (660mm x 1670mm)

	Cylinder/Rotor Speed Range-Single	---

	Cylinder/Rotor Speed Range-Dual	240 to 990 rpm

	Concave Area	1937 sq in (1.25 m2)

	Number of concave bars	13

	Number of rasp bars	10

	Over-shot beater diameter - in. (mm)	15.7-in (400mm)

	Over-shot beater speed - ft/sec (m/sec)	31.2 ft/sec (9.5 m/sec)

	Beater Grate Area	775 sq in (0.5 m2)

Tine Separator and Separator Concave

	Tine separator diameter - in. (mm)	26-in (660mm)

	Tine separator speed - ft/sec (m/sec)	49.2 to 98.4 ft/sec (15 to 30 m/sec)

Separating

	Separator Type	6 Walker

	Separator Length	128-in (3.25m)

	Separating Area	13,578 sq in (8.76 m2)

	Discharge Grate Area	---

Cleaning System

	Pre-Cleaner	1,999.5 sq in (1.29m2)

	Chaffer/Extension Area	1.999.5 in (1.29m2)

	Sieve Area	2,805 sq in (1.81 m2)

	Total Cleaning Area	7,719 sq in (4.98 m2)

	Cleaning Fan Speed	750-1,600 rpm

	Self-Leveling	---

Engine

	Type	6090HZ003D

	Displacement	548 cu. in (9.0 L)

	Cooling	Air-to-Air Aftercooler

	Rated Speed	2200

	Horsepower	360 hp

	Horsepower with Power Boost	393 hp

Grain Handling

	Grain Tank Size	300 bu. (11,000 L)

	Unloading Auger Length	21.5 ft (6.5 m)

	Unloading Rate	2.2 bu/sec

	Unloading Discharge Height	14-ft 1-in (4.31 m)

Capacities

	Fuel Capacity	211.3 gal (800 L)

	Transport Height (in the field position)	12-ft 9-in (3.96 m)

Base Weight-Less Head

	Grain	30,070 lb (15,000 kg)

	Corn	---

Skid Steers

Click model for specs

313

ENGINE

Manufacturer				John Deere

Model				4024T

Gross Horsepower (kw)				49 (37)

Net Horsepower (kw)				45 (34)

Rated RPM				2400

#Cylinders				4

Displacement, cuin(L)				149 (2.4)

Engine aspiration				Turbocharged

Fuel Capacity, gal (L)				18 (66)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				15 (57)

Optional High Flow, gpm (L/min.)				Not applicable

System Pressure, PSI (KPA)				3450 (23770)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				30.2 (22.5)

Opt High-Flw Hyd pwr,calculated,hp(kw)				Not applicable

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				1,260 (572)

SAE ROC with opt Counterweight, lb (kg)				1,400 (635)

Tipping Load, standard, lb (kg)				2,525 (1145)

Boom, lb(kn)				2,800 (12.4)

Bucket, lb(kn)				3,300 (14.6)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				6.8 (10.9)

Drive chain size				80HZ

Axle torque, lb-ft (nm)				3,420 (4637)

Standard Tire Size				10x16.5

315

ENGINE

Manufacturer				John Deere

Model				4024T

Gross Horsepower (kw)				49 (37)

Net Horsepower (kw)				45 (34)

Rated RPM				2400

#Cylinders				4

Displacement, cuin(L)				149 (2.4)

Engine aspiration				Turbocharged

Fuel Capacity, gal (L)				18 (66)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				16 (61)

Optional High Flow, gpm (L/min.)				25 (95)

System Pressure, PSI (KPA)				3450 (23770)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				32.2 (24.0)

Opt High-Flw Hyd pwr,calculated,hp(kw)				50.3 (37.7)

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				1,500 (680)

SAE ROC with opt Counterweight, lb (kg)				1,650 (748)

Tipping Load, standard, lb (kg)				3,000 (1361)

Boom, lb(kn)				3,900 (17.3)

Bucket, lb(kn)				3,300 (14.6)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				6.8 (10.9)

Drive chain size				80 HZ

Axle torque, lb-ft (nm)				4,050 (5491)

Standard Tire Size				10x16.5

318D

ENGINE

Manufacturer				John Deere

Model				4024HT

Gross Horsepower (kw)				63 (47)

Net Horsepower (kw)				58 (43)

Rated RPM				2300

#Cylinders				4

Displacement, cuin(L)				149 (2.4)

Engine aspiration				Turbo air-to air aftercooled

Fuel Capacity, gal (L)				19 (72)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				18 (68)

Optional High Flow, gpm (L/min.)				27 (102)

System Pressure, PSI (KPA)				3100 (21360)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				32.5 (24.2)

Opt High-Flw Hyd pwr,calculated,hp(kw)				48.8 (36.6)

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				1,800 (816)

SAE ROC with opt Counterweight, lb (kg)				1,950 (885)

Tipping Load, standard, lb (kg)				3,600 (1633)

Boom, lb(kn)				3,500 (15.5)

Bucket, lb(kn)				5,125 (22.7)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				6.8 (10.9)

Drive chain size				80 HD

Axle torque, lb-ft (nm)				4,450 (6033)

Standard Tire Size				10x16.5

320D

ENGINE

Manufacturer				John Deere

Model				4024HT

Gross Horsepower (kw)				68 (51)

Net Horsepower (kw)				63 (47)

Rated RPM				2300

#Cylinders				4

Displacement, cuin(L)				149 (2.4)

Engine aspiration				Turbo air-to air aftercooled

Fuel Capacity, gal (L)				19 (72)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				20 (76)

Optional High Flow, gpm (L/min.)				31 (117)

System Pressure, PSI (KPA)				3100 (21360)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				36.2 (26.9)

Opt High-Flw Hyd pwr,calculated,hp(kw)				56.1 (42.0)

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				2,000 (907)

SAE ROC with opt Counterweight, lb (kg)				2,150 (975)

Tipping Load, standard, lb (kg)				4,000 (1814)

Boom, lb(kn)				3,500 (15.5)

Bucket, lb(kn)				5,125 (22.7)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				6.8 (10.9)

Drive chain size				80 HD

Axle torque, lb-ft (nm)				4,725 (6406)

Standard Tire Size				12x16.5

326D

ENGINE

Manufacturer				John Deere

Model				5030HT

Gross Horsepower (kw)				74 (55)

Net Horsepower (kw)				70 (52)

Rated RPM				2000

#Cylinders				5

Displacement, cuin(L)				186 (3.1)

Engine aspiration				Turbo air-to air aftercooled

Fuel Capacity, gal (L)				29 (110)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				21 (79)

Optional High Flow, gpm (L/min.)				33 (125)

System Pressure, PSI (KPA)				3450 (23770)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				42.3 (31.5)

Opt High-Flw Hyd pwr,calculated,hp(kw)				66.4 (49.8)

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				2,600 (1179)

SAE ROC with opt Counterweight, lb (kg)				2,750 (1247)

Tipping Load, standard, lb (kg)				5,200 (2359)

Boom, lb(kn)				5,000 (22.1)

Bucket, lb(kn)				7,750 (34.3)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				7.0 (11.3)

Drive chain size				100 HD

Axle torque, lb-ft (nm)				5,680 (7701)

Standard Tire Size				12x16.5

328D

ENGINE

Manufacturer				John Deere

Model				5030HT

Gross Horsepower (kw)				85 (63)

Net Horsepower (kw)				80 (60)

Rated RPM				2000

#Cylinders				5

Displacement, cuin(L)				186 (3.1)

Engine aspiration				Turbo air-to air aftercooled

Fuel Capacity, gal (L)				29 (110)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				21 (79)

Optional High Flow, gpm (L/min.)				35 (132)

System Pressure, PSI (KPA)				3450 (23770)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				42.3 (31.5)

Opt High-Flw Hyd pwr,calculated,hp(kw)				70.4 (52.8)

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				2,800 (1270)

SAE ROC with opt Counterweight, lb (kg)				2,950 (1338)

Tipping Load, standard, lb (kg)				5,600 (2540)

Boom, lb(kn)				5,000 (22.1)

Bucket, lb(kn)				10,300 (45.6)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				7.0 (11.3)

Drive chain size				100 HD

Axle torque, lb-ft (nm)				6,235 (8454)

Standard Tire Size				14x17.5

332D

ENGINE

Manufacturer				John Deere

Model				5030HT

Gross Horsepower (kw)				95 (71)

Net Horsepower (kw)				68 (89)

Rated RPM				2600

#Cylinders				5

Displacement, cuin(L)				186 (3.0)

Engine aspiration				Turbo air-to air aftercooled

Fuel Capacity, gal (L)				29 (110)

HYDRAULIC SYSTEM

Standard Pump Flow, gpm (L/min.)				25 (95)

Optional High Flow, gpm (L/min.)				38 (144)

System Pressure, PSI (KPA)				3450 (23770)

Auxiliary Hydraulic Circuit, Std; Opt				Std

Hydraulic power, calculated, hp (kw)				50.3 (37.5)

Opt High-Flw Hyd pwr,calculated,hp(kw)				76.5 (57.4)

PERFORMANCE

SAE Rated Oper Cap (ROC), lb (kg)				3,200 (1452)

SAE ROC with opt Counterweight, lb (kg)				3,350 (1520)

Tipping Load, standard, lb (kg)				6,400 (2903)

Boom, lb(kn)				6,600 (29.2)

Bucket, lb(kn)				13,875 (61.4)

Self leveling bucket, Opt				Opt

DRIVE TRAIN

Maximum Grnd Speed,stand,mph (kph)				7.0 (11.3)

Drive chain size				100 HD

Axle torque, lb-ft (nm)				6,830 (9260)

Standard Tire Size				14x17.5

Drawn Planters

Click model for specs

1750 Conservation

Rows and Row Spacing

	Number of rows		4, 6, or 8

	Row spacing, in. (cm)		4 Row 30(76), 36(91), 38(97); 6 Row 30(76), 36(91), 38(97); 8 Row 30(76)

Frame

	Fold configuration		Rigid frame

	Frame tube size, in. (cm)		7x7-in. (178.x17.8 cm)

	Fold-and-go from tractor cab		NA

	Flexibility		NA

Hitch

	Base		Drawbar

	Optional		NA

	Rear hitch		NA

Lift System

	Type		Wheel module

	Number of cylinders		2 - 4 row frames, 4 - 6 and 8 row frames

Tires

	Base		7.60-15, 8 PR rib implement

	Optional		NA

	Quantity		2 - 4 row frames, 4 - 6 and 8 row frames

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blade

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Base, infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		Plateless

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Chain ground drive

	Optional		1 - motor hydraulic variable rate drive

	Number of drive wheels		2 - 4 row frames, 4 - 6 and 8 row frames

	Drive wheel disconnect		Yes, manual w/mechanical drive

	Counter shaft		7/8-in. hex

	Drill shaft		7/8-in. hex

	Seed transmission		One rear-mounted

	Transmission combinations		50 sprocket combinations

1760 Wing-Fold Flex

Rows and Row Spacing

	Number of rows		12 rows

	Row spacing, in. (cm)		12row 30-in.

Frame

	Fold configuration		Wing-fold, manual fold - base; or hydraulic fold option

	Frame tube size, in. (cm)		7 x 7 (17.8 x 17.8)

	Fold-and-go from tractor cab		Manual wing latches

	Flexibility		20 degrees up and 20 degrees down; 2-section center flex on 8row36, 8row38, and 12row30 only

Hitch

	Base		Drawbar hitch w/ring

	Optional		Drawbar hitch w/clevis

	Rear hitch		NA

Lift System

	Type		Wheel module

	Number of cylinders		6

Tires

	Base		9.5L-15, F1 LDR

	Optional		NA

	Quantity		6

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Base, infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		Plateless

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Tire contact

	Optional		NA

	Number of drive wheels		1 for seed transmission and 1 for optional liquid fertilizer

	Drive wheel disconnect		Automatic

	Counter shaft		7/8-in. hex

	Drill shaft		7/8-in. hex

	Seed transmission		Tire contact

	Transmission combinations		50 sprocket combinations

1760NT Wing-Fold Rigid

RowCommand™ individual-row control system
SeedStar™2 monitoring system
Improved pneumatic downforce system
Seed variable-rate drive
Row cleaner options to meet residue management needs
MaxEmerge XP™ and Pro-Series XP™
1760 and 1760NT Drawn Rigid and Flexible Wing-Fold frame
Tire contact drive system

Commodity storage

1.6-bu or 3.0-bu seed hoppers available

Destination

Destination country code
Language option code

Drive system

Pro-Shaft™ drive
RowCommand™ individual-row control system
Seed transmission
Tire contact drive system
Tire contact drive system with half-width disconnect
Seed variable-rate drive
Seed variable rate drive with half- or three-width disconnect

Fertilizer

Liquid fertilizer pump
1760 liquid fertilizer openers
1760NT liquid fertilizer openers

1770 Front-Fold Flex

Rows and Row Spacing

	Number of rows		12

	Row spacing, in. (cm)		30

Frame

	Fold configuration		Front-fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		Manual wing lock pin

	Flexibility		2-section flex frame, 20 degrees up, 30 degrees down

Hitch

	Base		Two point hitch for Cat.II or Cat.III with Quick Coupler only

	Optional		NA

	Rear hitch		NA

Lift System

	Type		Wheel module

	Number of cylinders		8

Tires

	Base		9.5L x 15 in. F1 load range D

	Optional		NA

	Quantity		8

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15 inch blades

	Depth gauging		2 - 4-1/2x16 in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4 in. depth in 1/4in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 Bu. (.06 cu. m) or 3.0 Bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Base, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		Plateless

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Tire contact

	Optional		1 or 2 motor hydraulic variable rate drive

	Number of drive wheels		1 for seed transmission and 1 for dry fertilizer

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		Tire contact

	Transmission combinations		50 sprocket combinations

1780 Rigid

Rows and Row Spacing

	Number of rows		6, 8, 11 (solid), 13 (w/skips), 15 (solid)

	Row spacing, in. (cm)		6/11row30/15 in. (76/38 cm), 8/15row30/15 in. 76/38 cm), 6 and 8 row 70 cm

Frame

	Fold configuration		Rigid

	Frame tube size, in. (cm)		3 x 7 front frame for fertilizer; 7 x 7 rear frame

	Fold-and-go from tractor cab		NA

	Flexibility		NA

Hitch

	Base		Drawbar

	Optional		NA

	Rear hitch		NA

Lift System

	Type		Drop axle lift system

	Number of cylinders		2 (4.5 x 8-in.)

Tires

	Base		16.5-16.1, 14 PR (transport), 18.9-50.8, 4 PR (transmission)

	Optional		NA

	Quantity		2

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15 inch blades

	Depth gauging		(2) 4-1/2x16 in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4 in. with 1/4 in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		---

		Capacity	1.6 Bu. (.06 cu. m) or 3.0 Bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, or 400 lb.

		Pneumatic	Base equipment, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		Plateless

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Tire contact

	Optional		NA

	Number of drive wheels		1 (tire contact drive)

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 hex

	Drill shaft		7/8 hex

	Seed transmission		Rear mounted on center frame

	Transmission combinations		50 sprocket combinations

1770NT 12Row30

Rows and Row Spacing

	Number of rows		12

	Row spacing, in. (cm)		30 in. (76)

Frame

	Fold configuration		Front fold

	Frame tube size, in. (cm)		7x7 in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Base

	Flexibility		3-section, 21 degrees up, 21 degrees down to center section

Hitch

	Base		Two point hitch for Cat.III or Cat.III narrow with Quick Coupler only

	Optional		NA

	Rear hitch		Optional

Lift System

	Type		Phased hydraulic cylinder lift system

	Number of cylinders		4

Tires

	Base		(4) 10x15 in. F1 load range D center frame transport tires, (2) 10x15 in. F1 load range D wing tires

	Optional		NA

	Quantity		6

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15 in. blade

	Depth gauging		(2) 4-1/2x16 in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4 in. with 1/4 in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		---

		Capacity	1.6 Bu. (.06 cu. m) or 3.0 Bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base equipment, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	NA

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		2-motor hydraulic variable rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		Rear mounted

	Transmission combinations		50 sprocket combinations

Markers

1770NT 16Row30

Rows and Row Spacing

	Number of rows		16

	Row spacing, in. (cm)		30 in. (76)

Frame

	Fold configuration		Front-fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Base equipment

	Flexibility		3-section, 21 degrees up, 21 degrees down to center section

Hitch

	Base		Two point hitch for Cat.II or Cat.III narrow with Quick Coupler only

	Optional		Drawbar hitch

	Rear hitch		Optional

Lift System

	Type		Phased hydraulic cylinder lift system

	Number of cylinders		8

Tires

	Base		(4) 10.00x15.00 in. F1 Load Range D center section transport, (4) 10.00x15.00 in. F1 Load Range D two on each wing

	Optional		NA

	Quantity		8

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blade

	Depth gauging		(2) 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4-in. with 1/4-in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		2-motor hydraulic variable-rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One on center frame

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		Rear mounted on center frame

	Transmission combinations		50 sprocket combinations

1770NT 24Row30

Rows and Row Spacing

	Number of rows		24

	Row spacing, in. (cm)		30 in. (76)

Frame

	Fold configuration		Front fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		Base equipment

	Flexibility		3-section, 21 degrees up, 21 degrees down to center section

Hitch

	Base		Two point hitch for Cat.III or Cat.III narrow with Quick Coupler only

	Optional		Drawbar hitch

	Rear hitch		Optional

Lift System

	Type		Rephasing hydraulic cylinder lift system

	Number of cylinders		8

Tires

	Base		(4) 11.00x22.5 in. F1 load range F center frame transport (4) 10.00x15 in. F1 load range D wing tire

	Optional		(4) Hi-Flotation 11.00x22.5 in load range F

	Quantity		8

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15 in. blade

	Depth gauging		(2) 4-1/2x16 in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4 in. with 1/4 in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		---

		Capacity	1.6 (.06 cu.m) or 3.0 bu. (.11 cu.m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, or 400 lb.

		Pneumatic	Base equipment, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	NA

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Finger pickup		Optional

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

	Optional		---

Drive System

	Base		2-motor hydraulic variable-rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One on center frame

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		Rear mounted on center frame

	Transmission combinations		50 sprocket combinations

1770NT CCS 12Row30

Rows and Row Spacing

	Number of rows		12

	Row spacing, in. (cm)		30 (76)

Frame

	Fold configuration		Front fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Base equipment

	Flexibility		3-section, 21 degrees up, 21 degrees down to center section

Hitch

	Base		Two point hitch for Cat.III or Cat.III narrow with Quick Coupler only

	Optional		NA

	Rear hitch		Optional

Lift System

	Type		Phased hydraulic cylinder lift system

	Number of cylinders		6

Tires

	Base		(4) 10.00x15.00 in. F1 Load Range D center section transport, (2) 10.00x15.00 in. F1 Load Range D one on each wing

	Optional		NA

	Quantity		6

Row Units

	Type		MaxEmerge™ XP or Pro-Series™ XP

	Opener		Tru-Vee™ double disk w/15-in. blade

	Depth gauging		(2) 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4-in. with 1/4-in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		---

		Capacity	1/16 bu.

		Material	Plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	NA

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		NA

	Finger pickup		NA

	Radial bean meter		NA

	Central Commodity System		Base equipment

		Seed capacity, bu. (cu. m)	70 bu.

Drive System

	Base		2 motor hydraulic variable-rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 hex

	Drill shaft		7/8 hex

	Seed transmission		Rear mounted on frame

	Transmission combinations		50 sprocket combinations

1770NT CCS 16Row30

Rows and Row Spacing

	Number of rows		16

	Row spacing, in. (cm)		30 in. (76)

Frame

	Fold configuration		Front-fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Base equipment

	Flexibility		3-section, 21 degrees up, 21 degrees down to center section

Hitch

	Base		Two point hitch for Cat. III or Cat. III narrow with Quik Coupler only

	Optional		Drawbar hitch

	Rear hitch		Optional

Lift System

	Type		Phased hydraulic cylinder lift system

	Number of cylinders		8

Tires

	Base		(4) 10.00x15.00 in. F1 Load Range D transport (4) 10.00x15.00 in. F1 Load Range D wing

	Optional		NA

	Quantity		8

Row Units

	Type		MaxEmerge™ XP or Pro-Series™ XP

	Opener		Tru-Vee™ double disk w/15-in. blade

	Depth gauging		(2) 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4-in. with 1/4-in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	Polyethylene (1.6) or roto-molded plastic (3.0)

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base equipment, Infinitely adjustable to 400-lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	NA

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		Base equipment

		Seed capacity, bu. (cu. m)	100 bu.

Drive System

	Base		2-motor hydraulic variable-rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One on center frame

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		Rear mounted on center frame

	Transmission combinations		50 sprocket combinations

1770NT CCS 24Row30

Rows and Row Spacing

	Number of rows		24

	Row spacing, in. (cm)		30 in. (76)

Frame

	Fold configuration		Front fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Base equipment

	Flexibility		3-section, 21 degrees up, 21 degrees down to center section

Hitch

	Base		Two point hitch for Cat. III or Cat. III narrow with Quik Coupler only

	Optional		Drawbar hitch

	Rear hitch		Optional

Lift System

	Type		Phased hydraulic cylinder lift system

	Number of cylinders		8

Tires

	Base		(4) 11.00x22.5 in. load range F transport, (4) 10.00x15 in. F1 load range D two on each wing

	Optional		(4) 11.00x22.5 in. load range F high floatation wing tires

	Quantity		8

Row Units

	Type		MaxEmerge™ XP or Pro-Series™ XP

	Opener		Tru-Vee™ double disk w/15-in. blade

	Depth gauging		(2) 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4-in. with 1/4-in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		Mini hoppers

		Capacity	1/16 bu. mini hopper

		Material	Plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base equipment, Infinitely adjustable to 400-lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	NA

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Central Commodity System		Base equipment

		Seed capacity, bu. (cu. m)	100 bu.

	Finger pickup		---

	Optional		---

	Radial bean meter		---

Drive System

	Base		2-motor hydraulic variable rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One on center frame

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		Rear mounted on center frame

	Transmission combinations		50 sprocket combinations

1790 12Row Split 23 or 24

Rows and Row Spacing

	Number of rows		12 (23/24 row)

	Row spacing, in. (cm)		12row30 in. (23/24row15)

Frame

	Fold configuration		Front-fold

	Frame tube size, in. (cm)		7 x 7 in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Base equipment

	Flexibility		3-section, 15 degrees up, 15 degrees down to center section

Hitch

	Base		Two point hitch for Cat. III with Quik Coupler only

	Optional		Drawbar hitch

	Rear hitch		Optional

Lift System

	Type		Phased hydraulic cylinder lift system

	Number of cylinders		6

Tires

	Base		(4) 10.00 x 15 load range D (mainframe transport), (2) 10.00 x 15 load range D (one each wing)

	Optional		NA

	Quantity		6

Row Units

	Type		Pro-Series™ XP

	Opener		Tru-Vee™ double disk w/15-in. blade

	Depth gauging		(2) 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle 1/4 to 4-in. with 1/4-in. increments

	Walking wheels		Base equipment

	Row unit seed hoppers		mini hoppers

		Capacity	1/16 bu. mini hopper

		Material	Plastic

	Row unit down force		Base equipment

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base equipment, Infinitely adjustable to 400-lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	NA

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		Yes

		Seed capacity, bu. (cu. m)	70

Drive System

	Base		2-motor hydraulic variable-rate drive

	Optional		Tire contact drive (chain)

	Number of drive wheels		One on center frame

	Drive wheel disconnect		Automatic

	Counter shaft		7/8 hex

	Drill shaft		7/8 hex

	Seed transmission		Rear mounted on center frame

	Transmission combinations		50 sprocket combinations

Markers

1790 16Row Split 31 or 32

SeedStar™ XP monitoring system
Improved pneumatic downforce system
RowCommand™ individual-row control system
Seed variable rate drive with half- or three-width disconnect
Row cleaner options to meet residue management needs
MaxEmerge XP™ and Pro-Series XP™
Central Commodity System (CCS™)
Double-crop packages for improved residue management
Innovative Central Insecticide System
Liquid fertilizer pump and delivery system

Commodity storage

Central Commodity System (CCS™)

Destination

Destination country code
Language option code

Drive system

Pro-Shaft™ drive
RowCommand™ individual-row control system
Seed transmission
Tire contact drive system
Tire contact drive system with half-width disconnect
Seed variable-rate drive
Seed variable rate drive with half- or three-width disconnect

Fertilizer

Liquid fertilizer pump and delivery system
Liquid fertilizer openers
Variable rate fertilizer

1790 24Row20

SeedStar™ XP monitoring system
Improved pneumatic downforce system
RowCommand™ individual-row control system
MaxEmerge XP™ and Pro-Series XP
1790 Drawn Front-Fold Frame Planter
Central Commodity System (CCS™)
Provide added versatility and productivity with CCS™ Refuge Plus™
Liquid fertilizer pump and delivery system

Commodity storage

Central Commodity System (CCS™)

Destination

Destination country code
Language option code

Drive system

Pro-Shaft™ drive
RowCommand™ individual-row control system
Seed transmission
Tire contact drive system
Tire contact drive system with half-width disconnect
Seed variable-rate drive
Seed variable rate drive with half- or three-width disconnect

Fertilizer

Liquid fertilizer pump and delivery system
Liquid fertilizer openers
Variable rate fertilizer

Integral Planters

Click model for specs

16Row40 Custom-Built

Rows and Row Spacing

	Number of rows		16

	Row spacing, in. (cm)		40

Frame

	Fold configuration		3-section, hydraulic over center stack-fold

	Frame tube size, in. (cm)		7x7-in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Yes

	Flexibility		7.5 degrees up and down

Hitch

	Type		Category 4N

Lift System

	Type		Tractor 3-point hitch

	Lift assist wheels		Base equipment. Heavy-duty lift-assist wheels for semi-integral operations

	Tires		2 - 12.5L-15SL 20 Ply

	Number of cylinders		2

Tires

	Base		4 - 7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		4 on frame

Row Units

	Type		Pro-Series™ XP

	Opener		Tru-Vee™ double-disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		Mini hoppers

		Capacity	1/16 bu. mini hopper

		Material	Plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	---

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base equipment, Infinitely adjustable to 400-lbs.

	Scrapers, opener blades		Optional

		Plastic rotary	---

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		NA

	Finger pickup		NA

	Radial bean meter		NA

	Central Commodity System		Base equipment

		Seed capacity, bu. (cu. m)	100 bu.

Drive System

	Base		3-motor hydraulic variable rate drive

	Optional		NA

	Number of drive wheels		NA

	Drive wheel disconnect		NA

	Counter shaft		7/8-in. hex

	Drill shaft		7/8-in. hex

	Seed transmission		NA

	Transmission combinations		NA

18Row38 Custom-Built

Rows and Row Spacing

	Number of rows		18

	Row spacing, in. (cm)		38

Frame

	Fold configuration		3-section, hydraulic over center stack-fold

	Frame tube size, in. (cm)		7x7-in. (17.8 x 17.8 cm)

	Fold-and-go from tractor cab		Yes

	Flexibility		7.5 degrees up and down

Hitch

	Type		Category 4N

Lift System

	Type		Tractor 3-point hitch

	Lift assist wheels		Base equipment. Heavy-duty lift-assist wheels for semi-integral operations

	Tires		2 - 12.5L-15SL 20 Ply

	Number of cylinders		2

Tires

	Base		4 - 7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		4 on frame

Row Units

	Type		Pro-Series™ XP

	Opener		Tru-Vee™ double-disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		Mini hoppers

		Capacity	1/16 bu. mini hopper

		Material	Plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	---

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	---

		Pneumatic	Base equipment, Infinitely adjustable to 400-lbs.

	Scrapers, opener blades		Optional

		Plastic rotary	---

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		NA

	Finger pickup		NA

	Radial bean meter		NA

	Central Commodity System		Base equipment

		Seed capacity, bu. (cu. m)	100 bu.

Drive System

	Base		3-motor hydraulic variable rate drive

	Optional		NA

	Number of drive wheels		NA

	Drive wheel disconnect		NA

	Counter shaft		7/8-in. hex

	Drill shaft		7/8-in. hex

	Seed transmission		NA

	Transmission combinations		NA

1700 Rigid

Rows and Row Spacing

	Number of rows		4, 6, 8, or 10

	Row spacing, in. (cm)		4 row 30(76), 36(91), 38(97), 40 (102);6 row 36(91), 38(97) 40(102); 8 row 36(91), 38(97), 40(102); 10 row 30 (76)

Frame

	Fold configuration		Non-folding rigid

	Frame tube size, in. (cm)		7x7-in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		NA

	Flexibility		Rigid frame

Hitch

	Type		For Cat. II with or without Quik-Coupler or Cat. III with Quik-Coupler

Lift System

	Type		Tractor rock shaft

	Lift assist wheels		Straight or arched dual lift assist wheels for semi-integral operations available

	Tires		2 - 7.60-15, 8 PR

	Number of cylinders		2 - 3 x 8-in. with lift-assist wheels

Tires

	Base		2 - 7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		2 on frame, 2 with optional lift-assist wheels

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	90 lb.

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Base, infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Chain ground drive

	Optional		1-motor hydraulic variable rate drive

	Number of drive wheels		2

	Drive wheel disconnect		Not required

	Counter shaft		7/8-in. hex

	Drill shaft		7/8-in. hex

	Seed transmission		Mechanical rear-mounted

	Transmission combinations		50 sprocket combinations

1710 Vertical-Fold

Rows and Row Spacing

	Number of rows		12

	Row spacing, in. (cm)		30-in. or 70cm

Frame

	Fold configuration		Vertical fold

	Frame tube size, in. (cm)		7x7-in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		Yes

	Flexibility		3-section - 8 degrees up flex and 6.5 degrees down flex

Hitch

	Type		For Cat. II with or without Quik-Coupler or Cat. III with Quik-Coupler

Lift System

	Type		Tractor 3-point hitch

	Lift assist wheels		Straight lift-assist wheels for semi-integral applications available

	Tires		2 - 7.60-15, 8 PR

	Number of cylinders		2 - 3 x 8-in. with lift-assist wheels

Tires

	Base		7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		4 on frame, 2 with optional lift-assist wheels

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	1.6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	90 lb.

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Chain ground drive - 2 wheels drive in flex frame mode, 4 wheels drive in rigid frame mode

	Optional		1 or 2 motor hydraulic variable rate drive

	Number of drive wheels		2

	Drive wheel disconnect		Not required

	Counter shaft		7/8-in. hex shaft

	Drill shaft		7/8-in. hex shaft

	Seed transmission		Mechanical rear-mounted

	Transmission combinations		50 sprocket combinations

1720 Stack-Fold

Rows and Row Spacing

	Number of rows		8, 12, or 16

	Row spacing, in. (cm)		8row36, 38, 40; 12row30, 36, 38, 40; 16row30

Frame

	Fold configuration		3-section, hydraulic over center stack-fold

	Frame tube size, in. (cm)		7x7-in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		Yes

	Flexibility		8 and 12 row: 5 degrees up and down; 16 row: 10 degrees up and 7 degrees down

Hitch

	Type		Cat. 2 or 3 with Quik-Coupler

Lift System

	Type		Tractor 3-point hitch

	Lift assist wheels		Base equipment on 16 row, option on 8 and 12 row. Straight lift-assist wheels for semi-integral operations

	Tires		2 - 7.60 x 15-in. 8 PR

	Number of cylinders		2 - 3 x 8-in. with lift-assist wheels

Tires

	Base		2 - 7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		4 on frame, 2 with optional lift-assist wheels

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	90 lb.

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Base, infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Chain ground drive 8 and 12 row, 3-motor variable rate drive on 16 row

	Optional		1-motor hydraulic variable rate drive on 8 row, 3-motor variable rate drive on 12 row, three mechanical transmissions on 16 row

	Number of drive wheels		2 on center frame, one on each wing

	Drive wheel disconnect		Not required

	Counter shaft		7/8-in. hex

	Drill shaft		7/8-in. hex

	Seed transmission		Mechanical rear mounted 8 and 12 row only

	Transmission combinations		50 sprocket combinations

1720 CCS Stack-Fold

Rows and Row Spacing

	Number of rows		16

	Row spacing, in. (cm)		30

Frame

	Fold configuration		3-section, hydraulic over center stack-fold

	Frame tube size, in. (cm)		7x7-in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		Yes

	Flexibility		10 degrees up and 7 degrees down

Hitch

	Type		Cat. 3 with Quik-Coupler

Lift System

	Type		Tractor 3-point hitch

	Lift assist wheels		Base equipment. Heavy Duty lift-assist wheels for semi-integral operations

	Tires		2 - 12.5L-15SL 20 Ply

	Number of cylinders		2

Tires

	Base		4 - 7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		4 on frame

Row Units

	Type		Pro-Series™ XP

	Opener		Tru-Vee™ double disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		Mini hoppers

		Capacity	1/16 bu. mini hopper

		Material	Plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	---

		Non-adjustable (4 springs)	---

		Adjustable heavy-duty	4 settings: 0, 125, 250, or 400-lb.

		Pneumatic	Base equipment, Infinitely adjustable to 400-lb.

	Scrapers, opener blades		Optional

		Plastic rotary	---

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	---

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		Base equipment

		Seed capacity, bu. (cu. m)	100 bu.

Drive System

	Base		3-motor hydraulic variable rate drive

	Optional		NA

	Number of drive wheels		NA

	Drive wheel disconnect		NA

	Counter shaft		7/8 in. hex

	Drill shaft		7/8 in. hex

	Seed transmission		NA

	Transmission combinations		NA

1730 Narrow-Row

Rows and Row Spacing

	Number of rows		11, 12, 13, and 15

	Row spacing, in. (cm)		11 row 15, 18, 19 or 20-in., 12 row 22, 13 row 15, 18, 19 or 20-in., 15 row 15, 18, 19 or 20-in.

Frame

	Fold configuration		Rigid

	Frame tube size, in. (cm)		7x7-in. (17.8x17.8 cm)

	Fold-and-go from tractor cab		NA

	Flexibility		Rigid frame

Hitch

	Type		For Cat. II with or without Quik-Coupler or Cat. III with Quik-Coupler

Lift System

	Type		Tractor rock shaft

	Lift assist wheels		Straight or arched dual lift assist wheels for semi-integral operations available

	Tires		2 - 7.60-15, 8 PR

	Number of cylinders		2 - 3 x 8-in. with lift-assist wheels

Tires

	Base		2 - 7.60-15, 6 PR traction implement

	Optional		NA

	Quantity		2 standard, 4 with lift-assist wheels

Row Units

	Type		MaxEmerge™ XP

	Opener		Tru-Vee™ double disk w/15-in. blades

	Depth gauging		2 - 4-1/2x16-in. semi-pneumatic wheels

	Adjustment		T-handle, 1/4 to 4-in. depth in 1/4-in. increments

	Walking wheels		Optional

	Row unit seed hoppers		---

		Capacity	1.6 bu. (.06 cu. m) or 3.0 bu. (.11 cu. m)

		Material	6 bu. polyethylene or 3.0 bu. roto-molded plastic

	Row unit down force		Base equipment

		Non-adjustable (2 springs)	90 lb.

		Non-adjustable (4 springs)	180 lb.

		Adjustable heavy-duty	4 settings: 0, 125, 250, 400 lb.

		Pneumatic	Base, Infinitely adjustable to 400 lb.

	Scrapers, opener blades		Optional

		Plastic rotary	NA

		Steel straight blade	Optional

		Heavy-duty	Optional

	Seed tube sensors		Base equipment

		Base	AccuCount™

		Optional	Standard

Seed Meters

	Base		Vacuum

	Optional		---

	Finger pickup		---

	Radial bean meter		---

	Central Commodity System		NA

		Seed capacity, bu. (cu. m)	NA

Drive System

	Base		Chain ground drive

	Optional		1-motor hydraulic variable rate drive

	Number of drive wheels		2

	Drive wheel disconnect		Not required

	Counter shaft		7/8-in. hex shaft

	Drill shaft		7/8-in. hex shaft

	Seed transmission		Mechanical, rear-mounted on 30-in. rows, front-mounted on narrow row spacings

	Transmission combinations		50 sprocket combinations

No-Till Air Drills

Click model for specs

1890

Sizes

	Working Widths	30 ft (9.1 m), 36 ft (11.2 m), 40 ft (12.2 m), 42-1/2 ft (12.9 m)

	Spacing	7.5, 10 in. (19, 25 cm)

	Number of Ranks	Two

	Number of Sections	Three

Tires

	Mainframe 30- to 42.5-ft. models		Eight 11L-15 10 ply

		Standard	---

	Mainframe 30- to 43-ft. models		---

		Standard	---

	50- and 60-ft. mainframe		Eight 33-in. x 15.5-in.-16.5-in. eight bolt

	Wings		Duals optional on 30-ft to 42.5-ft models

		Standard 50- and 60-ft. models (inner wings)	31 in. x 13.5 in.-15 in.

		Standard 30- and 42.5-ft. models	Four 11L-15 10PR

		Standard 30- and 43-ft. models	31-in. x 13.5-in.-15-in. eight ply

		Optional 30- and 42.5-ft. models	---

Openers

	Style		Single disk-beveled edge

	Rank Lock-Up		Yes

	Disk		---

		Diameter	18 in. (46 cm)

		Angle	7 degrees

	Down Pressure		Hydraulic

		Style	Active hydraulic-patented

		7.5-in. space	---

		10-in. space	---

	Depth Control		---

		Description	Gauge wheel beside disk

		Wheel Size	4-1/2 in. x 16 in. (11.5 cm x 40.5 cm)

		Range	1/2 in. to 3-1/2 in.

		Increments	1/4 in. (1/2 cm)

	In-Furrow Press Wheel		Standard

		Material	Rubber on plastic wheel

		Packing Force	5 lb to 45 lb

	Furrow Closing		Standard

		Description	Trailing wheel on 20-degree vertical angle

		Size	1 in. x 12 in. (2.5 cm x 30 cm)

		Material	Cast iron

		Down Force	26 lb to 43 lb

	Double-Shoot Capable		---

1895 SFP

Sizes

	Working Widths	30 ft (9.1 m), 36 ft (11.2 m), 40 ft (12.2 m), 43 ft (13.1 m)

	Spacing	Seed spacing: 10 in. (254 mm); separate fertilizer: 20 in. (508 mm)

	Number of Ranks	Two seed ranks; one separate fertilizer rank

	Number of Sections	Three

Tires

	Mainframe 30- to 42.5-ft. models		---

		Standard	---

	Mainframe 30- to 43-ft. models		Duals with eight-bolt wheels

		Standard	Eight 30 ft and 36 ft: 11L-15 load range D; 40 ft and 43 ft: 11L-15 FI load range F

	50- and 60-ft. mainframe		---

	Wings		Duals with six-bolt wheels

		Standard 50- and 60-ft. models (inner wings)	---

		Standard 30- and 42.5-ft. models	---

		Standard 30- and 43-ft. models	(Four per wing) 11L-15 8 PR implement tires

		Optional 30- and 42.5-ft. models	---

Openers

	Style		Seed: 90 Series 18-in. single-disk blade; fertilizer: 18-in. single-disk blade

	Rank Lock-Up		Front, middle, and rear

	Disk		18-in. single blade with beveled edge

		Diameter	18 in. (45.72 cm)

		Angle	Seed at 7 degrees; fertilizer at 5 or 7 (dry only) degrees

	Down Pressure		Hydraulic

		Style	Active hydraulic downforce

		7.5-in. space	---

		10-in. space	165 lb to 450 lb (75 kg to 204 kg)

	Depth Control		Gauge wheel beside disk

		Description	---

		Wheel Size	4.5 in. x 16 in. (11.5 cm x 40.5 cm); optional 3 in. x 16-in.

		Range	0.5 in. to 3.5 in. (1.27 cm to 8.89 cm)

		Increments	0.25 in. (0.50 cm)

	In-Furrow Press Wheel		0.75 x 9-in. tapered

		Material	Rubber-face press wheel

		Packing Force	---

	Furrow Closing		Yes

		Description	Trailing wheel on 20-degree vertical angle

		Size	1 in. x 12 in.

		Material	Cast iron

		Down Force	---

Air Hoe Drills

Click model for specs

1830

Seed Opener

	Type #1		Tru-Position - 51 degree

		Spacing	7.5, 10, 12.5-in. (254, 317.5 mm)

		Dimensions	1-1/4 x 2 x 28-in. (31.75 x 50.8 x 711 mm)

		Trip force	550 lb. (2.5 kN)

	Type #2		Tru-Position - 51 degree

		Spacing	7.5, 10, 12.5-in. (254, 317.5 mm)

		Dimensions	1-1/4 x 2 x 28-in. (31.75 x 50.8 x 711 mm)

		Trip force	350 lb. (1.5 kN) - 51 degree

	Type #3		Spring cushion hoe

		Spacing	7.5, 10, 12.5-in. (254, 317.5 mm)

		Dimensions	3/4 x 1-3/4 x 24-in. (19.05 x 44.45 x 610 mm)

		Trip force	80 to 250 lb. (0.5 to 1.1 kN)

	Penetration force		---

		C-shank	---

		Spring cushion hoe	---

	Underframe clearance		---

Mainframe

	Centerframe width		13-ft. 9-in. (4.19 meters)

	Cross members, in. (cm)		4 x 4-in. (102 mm x 102 mm)

	End tubes, in. (cm)		---

	Hitch, in. (cm)		4 x 4 x 3/8-in. (102 mm x 102 mm x 9.5 mm)

	Hitch category		Category 4 (2-in. [50 mm] pin)

	Seeding tool depth control		Adjustable mechanical stop

	Mainframe and wing flexibility		Diagonal flex

Fore-Aft Dimensions

	Length		---

		Hitch pin to rear of transport wheels	32-ft. 8-in. (9.95 m)

		Lateral frame clearance, opener to opener	30-in. (76.2 cm)

		Fore-aft frame clearance between ranks	29-in. (73.5 cm)

		Front of front cross member to front of rear cross member (4 ranks)	87-in. (2.21 m)

Harrow

	Type		Optional 2-bar tine-tooth

1835

Seed Opener

	Type #1		Tru-Position - 51 degree

		Spacing	10, 12.5-in. (254, 317.5 mm)

		Dimensions	1-1/4 x 2 x 28-in. (31.75 x 50.8 x 711 mm)

		Trip force	550-lb. (2.5 kN) - 51 degree

	Type #2		Tru-Position

		Spacing	10, 12.5-in. (254, 317.5 mm)

		Dimensions	1-1/4 x 2 x 28-in. (31.75 x 50.8 x 711 mm)

		Trip force	350-lb. (1.5 kN)

	Type #3		Spring Cushion Hoe - 51 degree

		Spacing	10, 12.5-in. (254, 317.5 mm)

		Dimensions	3/4 x 1-3/4 x 24-in. (19.05 x 44.45 x 610 mm)

		Trip force	80 to 250-lb. (0.5 to 1.1 kN)

Fertilizer Opener

	Type #1		Rolling disk

		Spacing	20, 25-in. (508, 635 mm)

		Blade size	18-in. (457 mm)

		Fertilizer compatibility	Anhydrous gas, liquid, dry

	Type #2		---

		Spacing	---

		Blade size	---

		Fertilizer compatibility	---

Mainframe

	Centerframe width		13-ft. 9-in. (4.19 m)

	Cross members, in. (cm)		4 x 4-in. (102 mm x 102 mm)

	End tubes, in. (cm)		4 x 4 x 3/8-in. (102 mm x 102 mm x 9.5 mm)

	Hitch, in. (cm)		2-in. (50 mm)Pin

	Hitch category		Category IV

	Seeding tool depth control		Adjustable mechanical stop

	Mainframe and wing flexibility		Diagonal flex

Fore-Aft Dimensions

	Length		---

		Hitch pin to rear of transport wheels	33-ft. 2-in. (10.12 m)

		Lateral frame clearance, opener to opener	30-in. (76.2 cm)

		Fore-aft frame clearance between ranks	29-in. (73.5 cm)

		Front of front cross member to front of rear cross member (4 ranks)	58-in. (1.47 m)

Fertilizer Opener

	Type #1		Rolling disk

		Spacing	20, 25-in. (508, 635 mm)

		Blade size	18-in. (457 mm)

		Fertilizer compatibility	Anhydrous gas, liquid, dry

	Type #2		---

		Spacing	---

		Blade size	---

		Fertilizer compatibility	---

Mainframe

	Centerframe width		13-ft. 9-in. (4.19 m)

	Cross members, in. (cm)		4 x 4-in. (102 mm x 102 mm)

	End tubes, in. (cm)		4 x 4 x 3/8-in. (102 mm x 102 mm x 9.5 mm)

	Hitch, in. (cm)		2-in. (50 mm)Pin

	Hitch category		Category IV

	Seeding tool depth control		Adjustable mechanical stop

	Mainframe and wing flexibility		Diagonal flex

Fore-Aft Dimensions

	Length		---

		Hitch pin to rear of transport wheels	33-ft. 2-in. (10.12 m)

		Lateral frame clearance, opener to opener	30-in. (76.2 cm)

		Fore-aft frame clearance between ranks	29-in. (73.5 cm)

		Front of front cross member to front of rear cross member (4 ranks)	58-in. (1.47 m)

1870

Seed Opener

	Type #1		Paired row

		Spacing	9-in.

		Dimensions	---

		Trip force	50lb.-120lb.

	Type #2		Side Band

		Spacing	12-in.

		Dimensions	---

		Trip force	50lb.-120lb.

Fertilizer Opener

	Type #1		Hydraulic Precision Depth Control

		Spacing	12-in.

		Blade size	---

		Fertilizer compatibility	Anhydrous, liquid, dry

730LL Air Disk Drills

Click model for specs

730

Sizes

	Working widths (ft.)	28, 36, 44 ft.

	Number of Ranks	4 ranks of c-shanks,1 rank seed openers

	Number of Sections	3

Opener

	Type		Double disk w/leading edge

	Penetration Force		Patented Acttive Hydraulic

		Option 1	105 lb/opener, adjustable

		Option 2	---

		Option 3	---

	Underframe Clearance		24 in. (609mm)

	Dimensions, in. (cm)		---

		C-Shank	---

		Spring Cushion Hoe	---

	Spacing, in. (cm)		---

Mainframe

	Centerframe Width		28, 36 ft.: 11 ft. 9in.; 44 ft: 14 ft. 9

	Wing Flexibility		11 deg. up, 9 deg. down

	Cross members, in. (cm)		---

	End tubes, in. (cm)		---

	Hitch, in. (cm)		---

1990CCS No-Till Air Drill

Click model for specs

1990 CCS

Sizes

	Working Widths	---

	Spacing	---

	Number of Ranks	---

	Number of Sections	3

Tires

		Standard 30- and 42.5-ft. models	(4) 11L-15 (8 PR)

		Standard 30- and 43-ft. models	---

		Optional 30- and 42.5-ft. models	(4) 31x13.5-15 (8 PR)

Openers

	Style		Single disc no-till

	Rank Lock-Up		Front optional

	Disk		---

		Diameter	18-in. (457 mm)

		Angle	7 degrees

	Down Pressure		---

		Style	Active hydraulic downforce

		7.5-in. space	---

		10-in. space	---

	Depth Control		---

		Description	Depth gauging wheel

		Wheel Size	4.5-in. x 16-in.

		Range	0.5-in. - 3 .5-in.

		Increments	1/4-in.

	In-Furrow Press Wheel		---

		Material	Semi-pneumatic rubber

		Packing Force	5 - 45 lb.

	Furrow Closing		---

		Description	15-degree closing wheel

		Size	1-in. x 12-in.

		Material	Cast iron

		Down Force	26-43 lb.

	Double-Shoot Capable		---

1590 No-Till Box Drill

Click model for specs

1590 No-Till Drill

Capacities

	Plain Grain		---

		10	3.5 bu./ft.

		12	---

		15	3.5 bu./ft.

		20	3.5 bu./ft.

		24	---

		30	---

	Grain/Fertilizer		---

		10	3.4 bu./ft.

		12	---

		15	3.4 bu./ft.

		20	3.4 bu./ft.

		24	---

		30	---

Meters

	Type		---

		10	Fluted-feed

		12	---

		15	Fluted-feed

		20	Fluted-feed

		24	---

		30	---

Conventional-Till Box Drills

Click model for specs

455 Front-Folding Grain Drill

Capacities

	Plain Grain		---

		24	---

		25	70 bu.

		30	84 bu.

		35	98 bu.

	Grain/Fertilizer		---

		24	---

		25	85 bu.

		30	102 bu.

		35	119 bu.

Meters

	Type		---

		24	---

		25	Fluted-feed

		30	Fluted-feed

		35	Fluted-feed

1520 Integral Drill

Capacities

	Plain Grain		---

		10	---

		12	---

		15	42 bu.

		20	40 bu.

	Grain/Fertilizer		---

		10	---

		12	---

		15	---

		20	---

Meters

	Type		---

		10	---

		12	---

		15	Fluted-feed

		20	Fluted-feed

1570 Coulter Cart

Dual toolbars offer coulter row-spacing options
Heavy-duty mainframe and tongue provide strength to work in fields with heady draft loads
Large-size tires carry coulter cart and drill in transport
Choice of three coulters to match soil conditions

Frame

Integral mounting
Choice of three coulters to match soil conditions
Heavy-duty mainframe and tongue provide strength to work in fields with heady draft loads
Large-size tires carry coulter cart and drill in transport
Category 2 or 3N 3-point hitch for quick coupling from coulter to the drill

Safety

Additional operators manuals and decal kit
Operate equipment safely

Sprayers

Click model for specs

4630 Sprayer

- Provides 165-hp turbocharged PowerTech™ E 6.8-L Tier 3 diesel engine
- GreenStar™-ready CommandView™ cab enhances productivity
- GreenStar™ AutoTrac™ assisted steering system enables higher productivity
- GreenStar™ display options available
- Huck®-bolted C-channel frame lays the foundation for a smooth ride
- Air bag/shock suspended axle provides a comfortable ride even in rough conditions
- Wide or narrow axle available to fit a variety of cropping row widths
- Boom structure built with high-strength square tube
- Optimal weight distribution means operator can get into field earlier
Cab and controls
- GreenStar™-ready CommandView™ cab enhances productivity
- CommandARM™ and hydro handle provide easy access to important operator controls
- High-output sound system provides a powerful sound performance
- SprayStar™ on-board diagnostics easy to understand
- Electrical fuse panel conveniently located for increased uptime
- GreenStar™ AutoTrac™ assisted steering system enables higher productivity
- High-capacity lights provide excellent night vision
- ComfortCommand™ seat eases strain of long spraying hours
- GreenStar™ display options available
Engine and powertrain
- Provides 165-hp turbocharged PowerTech™ E 6.8-L Tier 3 diesel engine
- John Deere pressure-compensated hydraulics
- Hydrostatic transmission provides a range of speeds
- Traction control enhances productivity
- Efficient cooling system reduces maintenance time and cost
- Superior braking capabilities quickly bring the sprayer to a stop

4730 Sprayer

Engine

	Make		John Deere

	Peak rated power (hp)		245

	Number of cylinders		6

	Displacement, cu. in. (l)		414 (6.8)

	Alternator		200 amp

	Fuel tank capacity, U.S. gallon (l)		133 (503)

Solution system

	Capacity, U.S. gallon (l)		800 (3028)

	Tank material		Stainless Steel (Poly. option)

	Rinse tank capacity, U.S. gallon (l)		120 (454)

	Quick fill size		3-in.

	Rate control make		SprayStar

	Model		GreenStar 2 Display 2600

	Flow meter size		---

	Suction strainer		30 mesh

	Pressure strainer		50 mesh

	Boom strainer		80 mesh

Boom

	Boom width options, ft. (m)		80, 90, 100 (24.4, 27.4, 30.5)

	Plumbing material		Stainless steel (poly optional)

	Ground height adjustment, in. (cm)		27 - 86.5 (68.6 - 220)

	Breakaway width, ft. (m)		80-ft. and 90-ft. booms: 6.5-ft. (1.98), 100-ft. boom: 10-ft. (3.05),

	Boom sections		7

Drivetrain

	Type		Hydrostatic

	Drive		Full time 4WD

	Shifting		Electrohydraulic (on the go)

	Hydraulic reservoir capacity, gallons (l)		17 (64)

	Ground speed w/std. tires, mph (kph)		---

		1st range	0 - 13.6 mph

		2nd range	0 - 17.4 mph

		3rd range	0 - 20.2 mph

		4th range	0 - 29.6 mph

		5th range	---

		6th range	---

Chassis

	Dry compatible		No

	Suspension		4 Wheel independent strut-type with air springs

	Crop clearance w/std. tires, in. (cm)		60 (152)

	Front tires		380/90R46, 320/90R46, 420/80R46

	Rear tires		380/90R46, 320/90R46, 420/80R46

	Flotation tires		520/85R38

	Hydraulic tread adjust		Hydraulic (manual optional)

	Wheel tread spacing, in. (cm)		120 -152 (305 - 386)

	Wheel base, in. (cm)		165.8 (421)

	Steering lock-to-lock (turns)		---

	Turning radius, ft. (m)		24 (7.3)

	Parking brake		Hydraulic release

	Primary brakes		Hydrostatic

	Ladder raise/lower		Hydraulic

4830 Sprayer

Engine

	Make		John Deere

	Peak rated power (hp)		275

	Number of cylinders		6

	Displacement, cu. in. (l)		414 (6.8)

	Alternator		200 amp

	Fuel tank capacity, U.S. gallon (l)		133 (503)

Solution system

	Capacity, U.S. gallon (l)		1000 (3785)

	Tank material		Stainless Steel

	Rinse tank capacity, U.S. gallon (l)		120 (454)

	Quick fill size		3-in. (std.), 2-in. optional

	Rate control make		SprayStar

	Model		GreenStar 2 Display 2600

	Flow meter size		---

	Suction strainer		30 mesh

	Pressure strainer		50 mesh

	Boom strainer		80 mesh

Boom

	Boom width options, ft. (m)		80, 90, 100 (24.4, 27.4, 30.5)

	Plumbing material		Stainless steel (poly optional)

	Ground height adjustment, in. (cm)		27 - 86.5 (68.6 - 220)

	Breakaway width, ft. (m)		80-ft. and 90-ft. booms: 6.5-ft. (1.98); 100-ft. boom: 10-ft. (3.05)

	Boom sections		7

Drivetrain

	Type		Hydrostatic

	Drive		Full time 4WD

	Shifting		Electrohydraulic (on the go)

	Hydraulic reservoir capacity, gallons (l)		17 (64)

	Ground speed w/std. tires, mph (kph)		---

		1st range	0 - 13.2 mph

		2nd range	0 - 16.7 mph

		3rd range	0 - 21.2 mph

		4th range	0 - 31 mph

		5th range	---

		6th range	---

Chassis

	Dry compatible		No

	Suspension		4 Wheel independent strut-type with air springs

	Crop clearance w/std. tires, in. (cm)		60 (152)

	Front tires		380/90R46, 320/90R50, 420/80R46

	Rear tires		380/90R46, 320/90R50, 420/80R46

	Flotation tires		600/85R38

	Hydraulic tread adjust		Hydraulic (manual optional)

	Wheel tread spacing, in. (cm)		120 -152 (305 - 386)

	Wheel base, in. (cm)		165.8 (421)

	Steering lock-to-lock (turns)		---

	Turning radius, ft. (m)		24 (7.3)

	Parking brake		Hydraulic release

	Primary brakes		Hydrostatic

	Ladder raise/lower		Hydraulic

4930 Sprayer

Engine

	Make	John Deere PowerTech Turbocharged Engine

	Peak rated power (hp)	325hp

	Number of cylinders	6

	Displacement, cu. in. (l)	551 (9.0L)

	Alternator	200amp

	Fuel tank capacity, U.S. gallon (l)	140 gal (530L)

Solution system

	Capacity, U.S. gallon (l)	1200 gal (4542L)

	Tank material	Stainless Steel

	Rinse tank capacity, U.S. gallon (l)	150 gal

	Quick fill size	3in

	Rate control make	John Deere SprayStar

	Model	GreenStar 2 Display 2600

	Flow meter size	1.5 in, optional 2nd flowmeter for high flow system

	Suction strainer	20mesh

	Pressure strainer	50mesh

	Boom strainer	80mesh (Optional)

Boom

	Boom width options, ft. (m)	90 (27.4), 100 (30.4), and 120 (36.5)

	Plumbing material	Stainless Steel

	Ground height adjustment, in. (cm)	24-84in (61-213cm)

	Breakaway width, ft. (m)	13ft (4m) tip; Full boom standard

	Boom sections	7

Drivetrain

	Type	Hydrostatic

	Drive	Full-time 4WD

	Shifting	Electro-Hydraulic

	Hydraulic reservoir capacity, gallons (l)	20 gal (76L)

	Ground speed w/std. tires, mph (kph)	L-20mph; L-35mph (0-56.3kph)

Chassis

	Dry compatible	Yes

	Suspension	Twin struts with air bags, Optional auto air spring leveling

	Crop clearance w/std. tires, in. (cm)	50in (127cm)

	Front tires	380/105R50 or 480/105R50

	Rear tires	380/105R50 or 480/105R50

	Flotation tires	620/70R46

	Hydraulic tread adjust	Standard

	Wheel tread spacing, in. (cm)	120-160in (305-406cm)

	Wheel base, in. (cm)	170in (432cm)

	Steering lock-to-lock (turns)	4.7

	Turning radius, ft. (m)	30ft (9.1m) - rear axle

	Parking brake	Spring-engaged, hyd-disengaged disk pack

	Primary brakes	Hydrostatic

	Ladder raise/lower	Automatic

	Total weight w/60 ft. boom, lb. (kg)	NA

	Total weight w/80 ft. boom, lb. (kg)	NA

	Total weight w/90 ft. boom, lb. (kg)	30,000 lbs (13,607kg)

	Total weight w/100 ft. boom, lb. (kg)	30,400 lbs (13,789kg)

	Total weight w/120 ft. boom, lb. (kg)	31,025 lbs (13598kg)

Primary Tillage

Click model for specs

2410 Drawn Chisel Plow

- Variety of models and sizes available
- Excellent residue-handling capability
- Rugged frame construction
- Walk-Over™ wheels help provide consistent working depth
- Precise and accurate depth control
- Wide variety of ground-engaging tools available
Depth control
Precise and accurate depth control

Exclusive AccuDepth™ system

GreenStar™/AccuDepth™ display harness information

2410 single-point depth control

610 Integral Chisel Plow

- Offers a variety of sizes and excellent residue flow
- Strong mainframe withstands demanding field conditions
- Choice of rigid, TruPosition™, and Tru-Depth™ standards
- Implement warning lights enable safe transport
- Operator's manual storage container comes as standard equipment
- Three-bar coil-tine harrow attachment available to finish off the field
Attachments
Extensions

Chisels and attachment hardware

Shovels and attaching hardware

Sweeps and attaching hardware

Three-bar coil-tine harrow attachment available to finish off the field

2700 Mulch Ripper

Variety of working and transport widths available
Percentages of residue cover remaining when using 2700 Combination Ripper
Walk-Over™ tandem wheels provide support and stability for smoother operation in the field
Narrow transport option available
Rear disk conditioner levels the soil profile
Rigid single-tube hitch provides greater turning clearance and shorter turning radius
Increase down pressure on mulching disk frames
Mulching disks are hydraulically adjustable
Hose identification kit

Heavy-duty frame members

Heavy-duty frame components made of tubular steel
Heavy-duty jack stand is easy to operate
Narrow transport option available
Disk-disk-shank-conditioner provides the best profile for operator's conditions
Rear disk conditioner levels the soil profile
Category 5 hitch link option available
Safety features in base equipment
Improved clamping design supports hoses and protects wiring harnesses

512 Disk Ripper

Crank-adjust single-point depth control
Typical percents of residue cover remaining
Walk-Over™ tandem wheels provide added support and stability
Level-lift™ hitch/turnbuckle holds the frame level
Ripper standards are located between the disk gangs
Disk gangs use field-proven gang components from the 637 and650 Disks
Discontinued - 512 rear hitch
Category 5 hitch link

Disk gang angle

Two-position rear gang angle
Dura-Flex™ gang bearings feature a two-year warranty
Front gang angle fixed at 18 degrees
Folding rear gang model reduces transport width

Frame configurations

Durable frame made of tubular steel
Nine-standard wing-fold stops
Walk-Over™ tandem wheels provide added support and stability
Front stabilizer wheels enhance performance in severe operating conditions
Hose storage bracket
Improved clamping design supports hoses and protects wiring harnesses

714 Mulch Tiller

Crank-adjust depth control available for three-bar models
Simple gang depth adjustment
Three-bar frames
Long, narrow hitch for good maneuverability in tight headlands
Coulter gangs
Choice of rigid, spring-reset, or Tru-Depth™ standards
Variety of ground-engaging tools available to match conditions
Remaining residue cover

Frames

Three-bar frames
Quik-Tatch™ tractor weights can be attached to frame for ballast
Variety of sizes to match the operation and tractor size
Stabilizer wheels
Hose identification kit

2100 Minimum-Till Ripper

3/4-in. straight shear-bolt standard minimizes soil and residue disturbance at the surface
Variety of working widths available
Heavy-duty frame handles tough operating conditions
2100 Drawn Hitch option available for seven- and nine-standard models
Closing wheel available to minimize surface disturbance
Spring-cushion coulters enable more level soil profile
Stabilizer wheels ensure straight travel and provide support

Standards

3/4-in. straight shear-bolt standard minimizes soil and residue disturbance at the surface
1-1/4-in. straight shear-bolt standard optional when more soil and residue movement is needed
3/4-in. and 1-1/4-in. cushion trip standards handle tough field conditions
Closing wheel available to minimize surface disturbance
Choice of min-till and low-disturbance ripper points available to match the job

22B Integral Ripper

- Economical single parabolic standard ripper promotes root growth
- Attaches to 3-point hitch
Ripper points
Ripper points

LaserRip™ Extreme points

Heavy-duty steel ripper points
Attachments
Mole ball

Heavy-duty knife

Standard support attachment

Standards

Hitch parts

913 V-Ripper

- Strong V-pattern frame promotes leading-edge shattering of center shank and material flow
- Two-position integral hitch to meet operator requirements
- Soil probe helps to determine proper operating depth
Standards
Adjustable standard spacing prevents side movement
Frame
Strong V-pattern frame promotes leading-edge shattering of center shank and material flow

Adjustable standard spacing prevents side movement
Ripper points
LaserRip™ Extreme points

Ripper points

Heavy-duty steel ripper points

915 V-Ripper

- Excellent residue-handling capability in primary tillage at all residue levels
- 5x7-in. or 7x7-in. frame sizes
- Integral hitch provides excellent maneuverability
- Single or dual gauge wheels available
- Coulter blades slice through surface residue
- Soil probe helps to determine proper operating depth
Standards
Adjustable standard spacing enables matching row or bed spacings

Attachments, heavy-duty knife

Attachments, standards

Attachments, clamps for standards
Ripper points
LaserRip™ Extreme points

Ripper points

Heavy-duty steel ripper points

975 Reversible Plow

Moldboard frame pivots with the bottoms
Strong mainframe handles tough plowing jobs
Easily maneuver tight turns with integral in-furrow hitch
Adjustable width of cut improves residue-handling ability
Adjustable rear gauge wheel comes in standard equipment

Frame configurations

Strong mainframe handles tough plowing jobs
Moldboard frame pivots with the bottoms
Easily maneuver tight turns with integral in-furrow hitch
Adjustable width of cut improves residue-handling ability
Adjustable rear gauge wheel comes in standard equipment

Standards and moldboard

Bidirectional bottoms available for level plowing
Safety-trip standards available to save time

995 Reversible Plow

V-style mainframe distributes weight for good penetration
Moldboard frame pivots with the bottoms
Integral on-land hitch provides excellent maneuverability
Adjust front gauge wheels to limit plowing depth
Rear gauge wheels come in standard equipment

Frame configurations

V-style mainframe distributes weight for good penetration
Moldboard frame pivots with the bottoms
Integral on-land hitch provides excellent maneuverability
Adjust front gauge wheels to limit plowing depth
Rear gauge wheels come in standard equipment

Standards and moldboards

Landside option
Bidirectional bottoms available for level plowing
Safety-trip standards available to save time

3710 Moldboard Plow

High clearance handles heavy residue levels
Adjustable width of cut
Scissor-type landing helps with tight turns on rigid models
Land wheels on rigid models are tied to the Adjust-O-Cut bar for automatic setting for each width of cut
Flex models are equipped with dual, staggered Walk-Over™ land wheels
Spring-reset standards available to work non-stop in rocks
Safety-trip standards for normal plowing conditions
Light-draft NU bottoms permit high-speed plowing
Shear-bolt coulters suited for areas without rocks
Adjustable-force cushion coulters available for rocky or normal field conditions

Frame

High clearance handles heavy residue levels
Mainframe has the strength to hold standards in line for consistent plowing depth from front to rear
3710 pole hitch
Adjustable width of cut
Scissor-type landing helps with tight turns on rigid models

Moldboards and coulters

Landsides and wedge help to keep plow on line of draft
Light-draft NU bottoms permit high-speed plowing
Adjustable-force cushion coulters available for rocky or normal field conditions
Shear-bolt coulters suited for areas without rocks
Coulter blades
Coulter mounting arms
Spring-reset standards available to work non-stop in rocks
Safety-trip standards for normal plowing conditions

Disks

Click model for specs

637 Tandem Disks

Operating Speed

	Miles per hour	4-6

Power Requirements

	Horsepower required	5-10 hp/ft.

Leveling Options

	Option 1	Crank-adjusted fore-aft leveling

	Option 2	Hydraulic front-to-rear leveling

Depth Control

	Option 1	Single-point depth control

	Option 2	TouchSet depth control

	Option 3	Mechanical depth stops for rigid models

Hydraulic Requirements

	Standard	2 SCVs (lift and fold) @ 2250 psi for optimum raise times

	Option 1	Additional control valve if equipped with hydraulic leveling control

	Option 2	Hydraulic wing control requires closed-center tractor hydraulic system

	Option 3	---

Electrical Requirements

	Standard	9-pin connector for warning lights

	Option 1	TouchSet depth control connector

	Option 2	---

Hitch

	Type	Level-lift hitch

Wing Flex

	Up	12 degrees

	Down	7 degrees

Frame

	Tubing	6x6-in. welded tubing

	Underframe clearance	---

650 Flex-Fold Disks

Operating Speed

	Miles per hour		4-6 mph

Power Requirements

	Horsepower required		8-12 hp/ft.

Leveling Options

	Option 1		Crank fore-aft leveling

	Option 2		---

Depth Control

	Option 1		Single point

	Option 2		TouchSet

	Option 3		---

Hydraulic Requirements

	Standard		2 SCV's (lift and fold) at 2250 psi for optimum raise times

	Option 1		Additional control valve if equipped with hydraulic leveling control

	Option 2		Hydraulic wing control requires closed-center tractor hydraulic system

	Option 3		---

Electrical Requirements

	Standard		9-pin connector for warning lights

	Option 1		TouchSet depth control connector

	Option 2		---

Hitch

	Type		self-leveling

Wing Flex

	Up		12 degrees

	Down		12 degrees

Frame

	Tubing		7x7x5/16-in. mainframe; medium flex-fold: (inside) - 5x7x5/16-in., (outside) - 5x7x1/2-in.; wide flex-fold: (inside) - 7x7x5/16-in., (outside)- 7x7x3/8-in.

	Underframe clearance		---

Gang

	Angle		fixed

		Front	22 degrees

		Rear	20 degrees

	Tubing		---

		Front	Mainframe: 4x6x3/8-in.; Medium flex-fold wing: 4x6x5/16-in.; Wide flex-fold wing: 4x6x3/8-in.

		Rear	Mainframe: 4x6x5/16-in.; Medium flex-fold wing: 4x6x5/16-in.; Wide flex-fold wing: 4x6x5/16-in.

	Gang bolt		1.25-in. square

	Gang standard		Rigid nodular iron

	Welded spool diameter		5.5-in.

	Bearings		Dura-Flex

	Scraper		Combination

670 Single Offset Disks

Conveniently located single-point depth control provides infinite range of depths
670 Disk uses straight cast standards
Self-aligning Dura-Flex™ (3+1) gang bearings protect seals from wire and twine
Combination or rigid scrapers available
Guide to 670 Disk transport dimensions

Frame

Strong frame design to resist torsional forces
Single offset design creates level disking
Crank leveling to achieve a level disking job
Adjustable gang angle to match soil conditions

Ground-engaging components

Bearing wear guards
Hydraulic hitch adjustment

Hitch

Self-leveling hitch keeps frame level in field and transport
Choice of hitch-angling adjustment

225 Offset Disks

One-piece welded mainframe on 225 and 425 Offset Disks provides reliable strength
Hitch can be set to meet disking needs
Choice of disk blades provided

Offset disk frame

Gang wrenches come as base equipment
One-piece welded mainframe on 225 and 425 Offset Disks provides reliable strength
Parallel-lift/leveling bar allows a disk to follow uneven terrain while keeping the frame level
Hitch can be set to meet disking needs
Choice of disk blades provided
Heavy-duty disk gangs and gang bearings

425 Offset Disks

One-piece welded mainframe on 225 and 425 Offset Disks provides reliable strength
Hitch can be set to meet disking needs
Choice of disk blades provided

Offset disk frame

Gang wrenches come as base equipment
One-piece welded mainframe on 225 and 425 Offset Disks provides reliable strength
Parallel-lift/leveling bar allows a disk to follow uneven terrain while keeping the frame level
Hitch can be set to meet disking needs
Choice of disk blades provided
Heavy-duty disk gangs and gang bearings

Seedbed Tillage

Click model for specs

200 Seedbed Finisher

Frame (factory assembled)

	Mainframe	4 x 4-in. (102 x 102 mm) double truss tube welded frame

	Wing frame	4 x 4 -in. (102 x 102 mm) double truss tube welded frame

	Spring-cushioned gang	3 x 3-in. (76 x 76 mm) tube

Hitch

	Description	3 x 6-in. (76 x 152 mm) tube frame with adjustable clevis hitch, telescoping tongue, and storage stand

Roller basket

	Bearings	Dura-Flex 3 + 1, two per gang

	Rollers	14-in. (35 cm) diameter with internal web support

	Gang mounting	spring

	Spiraling rods	Ten 0.875-in. (22 mm) diameter rods per roller

Tires, wheels, and spindles

	Tires	9.5L - 15FI Load Range D tires and wheels

	Spindles	2.25-in. diameter plug-in spindles with 6-bolt hubs

Miscellaneous

	Minimum recommended tractor horsepower	One horsepower per foot of working width

2210 Field Cultivator

Operating depth

	Inches	to 5-in.

Operating speed

	Miles per hour	5 to 8 mph

Horsepower required

	Horsepower per foot (hp/ft.)	4-8 PTO hp/ft. (200 lb. shanks may require 1-2 more hp/ft.)

Depth control

	Option 1	Single Point

	Option 2	AccuDepth

	Option 3	---

Hydraulic requirements

	Standard	2 SCVs (lift and fold) at 2500 psi for optimum raise times

	Option 1	---

	Option 2	---

Electrical requirements

	Standard	9-pin connector for warning lights and Accudepth

	Option 1	---

	Option 2	---

Hitch

	Type	Floating T-hitch

Frame

	Tubing	4 x 4-in. high-strength, box beam steel cross tubes through 3X6-in. and 2X5-in. steel fore-aft tubes (patented Tube-Thru-Tube design), welded construction

2310 Mulch Finisher

Operating depth

	Inches	5-in. max

Operating speed

	Miles per hour	10 mph

Horsepower required

	Horsepower per foot	8-12 hp/ft.

Depth control

	Option 1	Single point, crank adjusted

	Option 2	---

	Option 3	---

Hydraulics

	Standard	3 SCVs required, hydraulic transport lockup

	Option 1	---

	Option 2	---

Electrical

	Standard	9-pin connector for warning lights, 12-volt required for 5-section models

	Option 1	Touchset Depth Control: 9-pin connector and Touchset Depth Control connector

	Option 2	---

Hitch

	Type	Level-Lift T-hitch, cast steel hitch link, hitch jack, hydraulic hose tip storage bracket, CAT V option

Frame

	Tubing	4x4-in. rank tubes, 3x6-in. mainframe fore/aft tubes, 3x5-in. 5-section inner wings fore/aft tubes, 2x5-in. 3-section wings and 5-section outer wing fore/aft tubes

	Number of ranks	5

	Fore-and-aft	139-in.

	Underframe clearance	24-in.

Nutrient Applicators

Click model for specs

2510H

- Shallow placement of anhydrous
- 2510H High-Speed pictures
- Transport dimensions and horsepower requirements
- Three-year warranty
- Safety
Opener
Opener and depth control

Hydraulic down pressure
Frame
Frame configurations - 11 and 15 row

Frame configurations - 23 row
Wheels and tires
Wheel modules - 11 and 15 row

Wheel modules - 23 row
Fertilizer delivery
Anhydrous delivery

Implement height sensor

2510C

- Maintenance-free bearings
- Frame depth
- 2510C Conventional pictures
- Transport dimensions, spacing, and horsepower requirements
- Safety features
- Three-year warranty
Depth control
Single-point depth control and transport lock
Ground-engaging components
Front cutting coulters

Nutrient shank and knife

Floating closing disks

Maintenance-free bearings
Frame
17-row frame configurations

Frame depth

Hose and wiring harness assembly

Long, narrow T-hitch

Rear hitch

2510S

Available in both Strip-Till Residue Master™ Applicator and Strip-Till Medium Residue Applicator models.

Latest Listings

John Deere farm equipment, tractors, combines, harvest equipment at WMNOBBE.com: your source for used tractors, combines, sprayers and riding mowers in Southern Illinois and Southeastern Missouri.

Large Ag Equipment